600W Wind Turbine MPPT Charge Controller, 12V/24V

$104.61
Wind turbine mppt charge controller for wind power system, 12V/24V (auto), wind turbine rate power 500W, waterproof and dustproof design, IP67, Intelligent protection function, strong reliability, value for money.
SKU: ATO-WTCMPPT-600
Free Shipping
Delivery date: 6-12 days

Buy low price wind generator charge controller, mppt control, 500 watt, rated voltage can choose 12 volt or 24 volt, diode display, save money by selling directly to manufacturers.

Note: 

The controller needs to be selected according to the power of the wind turbine and the battery voltage.

Max voltage setup: 12.4V for 12V batteries, 29V for 24V batteries, and 58 for 48V batteries.

Specification:

ModelATO-WTCMPPT-600
Rated Voltage12V/24V (Automatic recognition voltage) ATO recommends the same generator voltage as the battery voltage
Wind Generator Rated Power600W
ProtectionOvercharge, overdischarge, reverse connnection of batteries,overloading, lighting, current control, automatic braking
FunctionMPPT Charging
Unloading WayPWM Electrodeless and noiseless unloading
Working Temperature-20~+60°C 35~85%RH
Dimension100*80*15mm
Net Weight0.4kg

Features
1. High quality technical components ensure the stability and reliability of the wind turbine controller.
2. Waterproof and dustproof, the controller can be used in various outdoor environments.
3. Voltage/current control charging ensures that the battery is always charged.
4. The MPPT charging effect is to collect electrical energy from the generator and charge the battery.
5. Use PWM to unload excess electron energy to protect the battery and ensure the safety of the wind generator.

Wind Power System Connection Diagram
Wind power system control schemes

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Great choice
5
Jim
Avatar
2/16/2020 7:07 PM
My solar panel is often exposed to bad weather. I believe the MPPT wind turbine charge controller is my best choice. I did not hesitate to buy a 12V MPPT controller. It is really great and can adjust the temperature and compensate for the voltage change.
Was this review helpful? Yes No (0/0)
Do you have a suitable charge controller for my application?
5
abner
Avatar
8/1/2023 3:57 AM
I am looking for a charge controller for my wind turbine. The turbine puts out 13 volts DC and 1 amp at a 10 mph wind and all the way up to 48 volts and 10 amps at a 40 mph wind.
Obviously, the 48 volt/10 amp would be a lot more productive if adjusted to say 12 volt and 40 amps. Do you have a charge controller that would work for this application?
My battery bank is 12 volts.
Was this review helpful? Yes No (0/0)
ATO Responded
We recommend 600W Wind Turbine MPPT Charge Controller, SKU: ATO-WTCMPPT-600, rated voltage 12V, maximum current 40A. This charge controller can meet your needs. You can tell us what is the power of your wind turbine in W, in order to give you the correct advice, thank you for your understanding.
Compatibility test
4
Arro
Avatar
10/28/2026 1:13 AM
If I use this controller with an ATO-WT-600M4 turbine (in a 12-volt configuration), will it work properly? The current might approach or even exceed 40 amps.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we confirm that this controller is compatible with the ATO-WT-600M4 turbine in a 12-volt configuration. However, generators have efficiency limits; they don't always achieve 600W output at 100%. Generator efficiency varies depending on wind speed and environmental conditions.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Buy low price wind generator charge controller, mppt control, 500 watt, rated voltage can choose 12 volt or 24 volt, diode display, save money by selling directly to manufacturers.

Note: 

The controller needs to be selected according to the power of the wind turbine and the battery voltage.

Max voltage setup: 12.4V for 12V batteries, 29V for 24V batteries, and 58 for 48V batteries.

Specification:

ModelATO-WTCMPPT-600
Rated Voltage12V/24V (Automatic recognition voltage) ATO recommends the same generator voltage as the battery voltage
Wind Generator Rated Power600W
ProtectionOvercharge, overdischarge, reverse connnection of batteries,overloading, lighting, current control, automatic braking
FunctionMPPT Charging
Unloading WayPWM Electrodeless and noiseless unloading
Working Temperature-20~+60°C 35~85%RH
Dimension100*80*15mm
Net Weight0.4kg

Features
1. High quality technical components ensure the stability and reliability of the wind turbine controller.
2. Waterproof and dustproof, the controller can be used in various outdoor environments.
3. Voltage/current control charging ensures that the battery is always charged.
4. The MPPT charging effect is to collect electrical energy from the generator and charge the battery.
5. Use PWM to unload excess electron energy to protect the battery and ensure the safety of the wind generator.

Wind Power System Connection Diagram
Wind power system control schemes

Product reviews
Great choice
5
Jim
Avatar
2/16/2020 7:07 PM
My solar panel is often exposed to bad weather. I believe the MPPT wind turbine charge controller is my best choice. I did not hesitate to buy a 12V MPPT controller. It is really great and can adjust the temperature and compensate for the voltage change.
Was this review helpful? Yes No (0/0)
Do you have a suitable charge controller for my application?
5
abner
Avatar
8/1/2023 3:57 AM
I am looking for a charge controller for my wind turbine. The turbine puts out 13 volts DC and 1 amp at a 10 mph wind and all the way up to 48 volts and 10 amps at a 40 mph wind.
Obviously, the 48 volt/10 amp would be a lot more productive if adjusted to say 12 volt and 40 amps. Do you have a charge controller that would work for this application?
My battery bank is 12 volts.
Was this review helpful? Yes No (0/0)
ATO Responded
We recommend 600W Wind Turbine MPPT Charge Controller, SKU: ATO-WTCMPPT-600, rated voltage 12V, maximum current 40A. This charge controller can meet your needs. You can tell us what is the power of your wind turbine in W, in order to give you the correct advice, thank you for your understanding.
Compatibility test
4
Arro
Avatar
10/28/2026 1:13 AM
If I use this controller with an ATO-WT-600M4 turbine (in a 12-volt configuration), will it work properly? The current might approach or even exceed 40 amps.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we confirm that this controller is compatible with the ATO-WT-600M4 turbine in a 12-volt configuration. However, generators have efficiency limits; they don't always achieve 600W output at 100%. Generator efficiency varies depending on wind speed and environmental conditions.
Only registered users can write reviews
Customers who bought this item also bought

12V DC Micro Water Turbine Generator

ATO-WT-12
$28.76
Micro water turbine for sale at a low price, generator with DC 12V regulated output, which can power and charge 12V radios and LED lights. This portable hydroelectric generator is suitable for use with smart taps, shower room lighting, power generating temperature display showers, and solar automatic water controllers.

600W 12V/24V/48V Alternator, 3 Phase

ATO-PMG-600L1
$529.07
Low price 600W permanent magnet alternator for wind turbine generators, 3 phase alternator, low rpm, 12/24/48 volt permanent magnet generator, suitable for working in harsh environments with humidity or dust.