600W Pneumatic Vane Air Motor

$390.32
Lower cost pneumatic vane air motor with 600 watt, rated torque 19.5 lb.in, 30 cfm air consumption, rotate speed 3000rpm, it offers small size and light weight and long life service.
SKU: ATO-PVAM-HX2AM
*
Free Shipping
Delivery date: 6-12 days

600W pneumatic vane air motor for sales, three kinds of installation methods can be chosen, gray color. It can be operated in the tough environment which is damp, high-heat, excessive dust and other poor working environment.

Specification

ModelOperation DataMaximum TorqueWeightInstallation MethodColorCertificationWarranty
PowerTorqueRotate SpeedAir ConsumptionRotate SpeedTorque
hpkWNmlb.inrpmm³/ hcfmrpmNmlb.inkg
ATO-HX2AM-H0.930.62.219.5300049.5303503.0526.12.6Foot MountingGrayCE12 months
ATO-HX2AM-V2.8Hub & Face Mounting
ATO-HX2AM-F1103.7IEC Flange

Dimension (unit=inch/mm)

600W pneumatic vane air motor 2AM-H     Dimension of 600W pneumatic vane air motor 2AM-H600W pneumatic vane air motor 2AM-V                          Dimension of 600W pneumatic vane air motor 2AM-V

Vane air motor 2AM-F110                               600W pneumatic vane air motor 2AM-F110 size

Details

600W Pneumatic Vane Air Motor Details

Tips: Why Choose Pneumatic Vane Air Motor?

Pneumatic motors are different from other power sources in many aspects. When selecting a pneumatic motor to complete a specific job, the working characteristics of the pneumatic motor must be considered. The power and pressure of the pneumatic motor can be easily changed by adjusting the air supply flow and pressure of the intake pipe. Rotating speed. The general principle for selecting a pneumatic motor is: the model should be able to meet the required power and torque when only 2/3 of the air supply pressure of the pipeline is used, and the pressure of the pipeline can cope with the overload and starting situation. The air supply pressure and speed of the output power and speed pipeline will affect the output power of the air motor.
Torque and speed
1. When the load increases, the speed of the air motor will decrease, and its torque will increase accordingly to match the load. The torque will continue to increase until the locked-rotor state, and then the locked-rotor state will be maintained without damaging the air motor. The air motor is not allowed to rotate at high speed for a long time without load.
2. When the load is reduced, the speed of the air motor will increase, and its torque will be reduced to match the reduced load.
3. When the load acting on the air motor increases or decreases, the speed can be controlled by increasing the pressure of the air source.
4. The starting torque of the air motor is lower than the running torque, which can provide a smooth, shock-free starting. If there is a heavy load starting, additional air supply pressure must be provided.
Air consumption and speed
As the speed and air pressure increase, the air consumption will increase.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Outstanding customer service
5
Jbien
Avatar
8/4/2021 8:33 PM
The first one of these 600W air motor arrived on time but failed in the first 5 mins of operation. The supplier listened, apologized, explained how it was rare but possible for a new motor to fail, and then shipped a new one (at their cost) immediately. Although this pneumatic vane air motor does not work more than a few minutes per week in my application, the new air motor works fine so far.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

600W pneumatic vane air motor for sales, three kinds of installation methods can be chosen, gray color. It can be operated in the tough environment which is damp, high-heat, excessive dust and other poor working environment.

Specification

ModelOperation DataMaximum TorqueWeightInstallation MethodColorCertificationWarranty
PowerTorqueRotate SpeedAir ConsumptionRotate SpeedTorque
hpkWNmlb.inrpmm³/ hcfmrpmNmlb.inkg
ATO-HX2AM-H0.930.62.219.5300049.5303503.0526.12.6Foot MountingGrayCE12 months
ATO-HX2AM-V2.8Hub & Face Mounting
ATO-HX2AM-F1103.7IEC Flange

Dimension (unit=inch/mm)

600W pneumatic vane air motor 2AM-H     Dimension of 600W pneumatic vane air motor 2AM-H600W pneumatic vane air motor 2AM-V                          Dimension of 600W pneumatic vane air motor 2AM-V

Vane air motor 2AM-F110                               600W pneumatic vane air motor 2AM-F110 size

Details

600W Pneumatic Vane Air Motor Details

Tips: Why Choose Pneumatic Vane Air Motor?

Pneumatic motors are different from other power sources in many aspects. When selecting a pneumatic motor to complete a specific job, the working characteristics of the pneumatic motor must be considered. The power and pressure of the pneumatic motor can be easily changed by adjusting the air supply flow and pressure of the intake pipe. Rotating speed. The general principle for selecting a pneumatic motor is: the model should be able to meet the required power and torque when only 2/3 of the air supply pressure of the pipeline is used, and the pressure of the pipeline can cope with the overload and starting situation. The air supply pressure and speed of the output power and speed pipeline will affect the output power of the air motor.
Torque and speed
1. When the load increases, the speed of the air motor will decrease, and its torque will increase accordingly to match the load. The torque will continue to increase until the locked-rotor state, and then the locked-rotor state will be maintained without damaging the air motor. The air motor is not allowed to rotate at high speed for a long time without load.
2. When the load is reduced, the speed of the air motor will increase, and its torque will be reduced to match the reduced load.
3. When the load acting on the air motor increases or decreases, the speed can be controlled by increasing the pressure of the air source.
4. The starting torque of the air motor is lower than the running torque, which can provide a smooth, shock-free starting. If there is a heavy load starting, additional air supply pressure must be provided.
Air consumption and speed
As the speed and air pressure increase, the air consumption will increase.

Product reviews
Outstanding customer service
5
Jbien
Avatar
8/4/2021 8:33 PM
The first one of these 600W air motor arrived on time but failed in the first 5 mins of operation. The supplier listened, apologized, explained how it was rare but possible for a new motor to fail, and then shipped a new one (at their cost) immediately. Although this pneumatic vane air motor does not work more than a few minutes per week in my application, the new air motor works fine so far.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

63mm Worm Gearbox, Ratio 5:1 to 100:1

ATO-WGR63
$614.64
Economical price worm gearbox is designed with a 5~100 reduction gear ratio. 63mm center distance, 1400 rpm rated speed. You can buy 250W, 750W, and 1500W asynchronous motors together from ATO for more efficient use; the worm gearbox reducer and asynchronous motor are all available in stock.