Note: This electric butterfly valve cannot be used for drinking water.
Industrial electric actuated butterfly valve can control a lot of medium at -10 °C to 120 °C, including water, air, gas, oil and other liquids. Electrically operated butterfly valve is equipped with an aluminum alloy electric actuator and EPDM seat, which is a reliable device for gases and liquids flow control.
Specification
| Butterfly Valve | Model | ATO-EBV-150WF | |
| Media | Water, Air, Gas, Oil, Liquid, etc. | ||
| Butterfly Valve Type | Wafer Type | PVC Type | |
| Port Size | 6 inch (DN150, 150mm) | ||
| Body Material | Cast Iron | PVC | |
| Disc Material | Stainless Steel (SS) | UPVC | |
| Seat Material | EPDM | ||
| Working Temperature | -10 °C to 120 °C | ||
| Electric Actuator | Model | ATO-KLST-20 | |
| Frequency | 50/ 60Hz | ||
| Power Supply (Optional) | 110V AC, 220V AC, 380V AC, 24V DC | ||
| Actuator Input | 4-20mA DC | ||
| Actuator Type | Double Acting | ||
| Output Torque & Response Time | 80N.m, 9s 100N.m, 15s 150N.m, 20s 200N.m, 30s/ 60s | ||
| Actuator Material | Aluminum Alloy | ||
Wafer Butterfly Valve Body Dimension (Unit: mm)

| DN | L | H1 | H2 | A | D | D1 | N-φd |
| 150 | 56 | 139 | 405 | 255 | 238 | 211 | 4-25 |
PVC Butterfly Valve Body Dimension (Unit: mm)

| JIS | ANSI | DIN | D | D2 | D3 | H2 | H3 | W1 | W2 | d1 | D4 | S | H1 | L | |||
| D1 | n-φe | D1 | n-φe | D1 | n-φe | ||||||||||||
| 240 | 8-23 | 241.5 | 8-23 | 240 | 8-18 | 287 | 152 | 169 | 177 | 19 | 70 | 54 | 10.5 | 102 | 22 | 372 | 255 |
Details

Tips for installing electric butterfly valve
- During installation, the valve disc should stop in the closed position.
- The opening position should be determined according to the rotation angle of the butterfly plate.
- For butterfly valves with bypass valves, the bypass valve should be opened before opening.
- It should be installed according to the manufacturer's installation instructions. For butterfly valves with heavy weight, a firm foundation should be set up.
Product reviews
Wafer butterfly valve
Phoebus
7/22/2025 7:31 PM
I need a 6-inch wafer butterfly valve. 150 pound class, flange connection (FF butt welding flat flange) with trunnion end, valve body material CPVC, valve disc CPVC, ball CPVC, valve seat FPM (fluoro rubber), operating lever actuator, design pressure 10.3 bar. Any recommendations?
Was this review helpful? (0/0)
CAD Drawings
Gulio
2/8/2026 8:11 PM
Hello, I would like to ask if you have CAD drawings for a 6-inch DN150 PVC butterfly valve? We are about to purchase one, but need to confirm its compatibility and installation location in our system.
Was this review helpful? (0/0)
Only registered users can write reviews