Low noise 24V DC micro brushless vibrating electric motor offers a digital speed display controller, 50W power, 3.3A current,1.8 kN force, 7000rpm rated speed, suitable for shaker table, mining, chemicals, medical equipment, and food machinery.
Features
- 50W 24V DC brushless vibrating electric motor with a variable speed controller achieves stable operation and can adjust the speed of rotation.
- High efficiency and energy saving, saving 40-60% of electricity compared to ordinary motors. Long service life, 5 times that of ordinary motors.
- Small industrial DC vibration motor provides accurate and fast regulator positioning and analog output.
- It is resistant to deformation and oxidation and can withstand long-term high-speed operation.
- Special voltage and speed can be customized, please contact us.
Specifications
| Model | ATO-50DCBVM-244 | |||||
| Voltage | 24V | |||||
| Rated Speed | Max: 7000rpm, Min: 400rpm | |||||
| Current | 3.3A | |||||
| Power | 50W | |||||
| Force | 1.3 kN (Test at no load) Note: In practical application, the seismic force may be reduced by about 30%. | |||||
| Protection Rank | IP65 (Dustproof and Waterproof) | |||||
| Insulation Grade | F (The Highest Heat Resistant Temperature is 155℃) | |||||
| Cooling Mode | Natural Cooling (IC410) | |||||
| Working System | S1 (Continuous Duty) | |||||
| Weight | 1.8 kg | |||||
| Dimensions | 146mm x 110mm x 69mm | |||||
| Frame No | 4 | |||||
| Certificate | CE | |||||
Notes
- +/- 20% voltage tolerance.
- Max/Minimum speed range that can be achieved via potentiometer: 1000-7200rpm.
Dimension (Unit: mm)

| Frame No | A | B | C | D | E | F | G | H | I | J | K | L | M | N |
| 4 | 146 | 110 | 68.5 | 9 | 60.4 | 27.5 | 45 | 27.5 | 30.5 | 91.5 | 9 | 17.5 | 55 | M-16 |
Internal Structure

Applications
ATO 50W 24V 7000rpm micro DC brushless vibration electric motor is widely used in mining, metallurgy, coal, electric power, construction, chemical industry, medical care, casting, food, powder spraying equipment, powder sieving, food machinery, etc.

Tips: DC Vibration Motor Installation on Vibrating Screen Motion Trajectories
Different DC vibration motor installations and combination methods can generate different vibration trajectories for the vibrating screen machinery to complete various sieving operations. For example, installing a single DC vibration motor can generate circular or elliptical motion trajectories, which is long used in rotary vibrating screens other equipment, installed with the same model and the opposite direction of rotation of the vibration motor can generate a linear motion trajectory, often used in linear vibrating screens and other equipment.
It is also possible to install two DC vibration motors with different models and different speeds to make the device generate a composite motion trajectory, usually in two forms: dual-frequency composite and dual-amplitude composite. For example, two vibration motors are installed at the feeding end and the discharging end of the vibration screening equipment, so that the feeding end presents large amplitude and low-frequency vibration. In contrast, the output end presents a small amplitude and high-frequency vibration. The middle of the vibration screening equipment overlaps two This kind of movement makes the equipment play a more effective screening role.
ATO-50DCBVM-244
Then the force for ATO-25DCBVM12-Z03 is expressed in kg, not kN. I just would like some info on all these technical specs.
ATO-50DCBVM-244
ATO-50DCBVM-244
Then the force for ATO-25DCBVM12-Z03 is expressed in kg, not kN. I just would like some info on all these technical specs.
The force for ATO-25DCBVM12-Z03 is expressed in 15kg, equivalent to 150N.
ATO-50DCBVM-244
Then the force for ATO-25DCBVM12-Z03 is expressed in kg, not kN. I just would like some info on all these technical specs. The force for ATO-25DCBVM12-Z03 is expressed in 15kg, equivalent to 150N.
Model ATO-50DCBVM-244
50W, 24V, 7000rpm DC Brushless Vibration Motor
Customized low-temperature bearing version with Controller (just the drive PCB only).
We are also planning to order 100 of these 50 Watt motors with boards plus about 750 of the 30 Watt versions for delivery beginning January 2024.
Can you give a rough estimate of the lead time for an order of this size?