50A DC Arc Plasma Cutter, Dual Voltage 110V/220V

$857.98
Plasma cutter price is cheap, 50A digital DC plasma cutter miller can run on voltage 110V/220V, 50Hz/60Hz, automatic dual frequency, it has high cutting speed, smooth cutting or welding, power efficiency and low noise output.
SKU: ATO-WM-LTP5000D
*
Free Shipping
Delivery date: 6-12 days

Dual voltage arc welder output current with 10-50A, suitable for welding stainless steel, mild steel, aluminum and other metal material, ATO welding supplies manufacturer direct sales.

Specifications

ModelATO-WM-LTP5000D
Output PowerDC
Input Voltage110V/220V, +/15%, 1-PH, 50Hz/60Hz (Automatic dual frequency)
Input Current240V, 1-PH, 20A
Output Current10-50A
Power7.1 kVA
Power Factor0.73
Duty Cycle at 40℃ (104℉)60% at 50A, 240V
Dimension381mm*152.4mm*340.8mm
Weight11.8kg
Cutting MaterialMild Steel, Stainless Steel, Aluminum, etc
Welding Thickness1/2"
Gas SupplyClean, Dry, Oil-Free Argon
ColorRed
Warranty12 Months
Input Power Cable Length6' (1.8m)
Max Severance Thickness3/4"
Recommender Gas Inflet Flow Rate/Pressure3.6scfm at 65psi
AccessoriesPilot Arc Plasma Torch ( 9’5")
Plasma Consumables (installed on the torch head)
Air Filter/Regulator
Ground Clamp&Cable
Connections, (like air house etc.)
User Manual

Cut Chart

MaterialThicknessCurrent
inchesmmamps
Mild Steel10 gauge350
1/4650
3/81050
1/21250
5/81650
Stalinless Steel10 gauge350
1/4650
3/81050
1/21250
Aluminum1/8350
1/4650
3/81050
1/21250

Features:
1. 10-50 Amp AC/DC square-wave inverter TIG/Stick (MMA) welder.
2. Automatic dual voltage/ dual frequency (110/220Volt 50/60Hz).
3. High frequency start hand torch control and precise foot pedal welding heat control.
4. Suitable for welding stainless steel, mild steel, aluminum and other metal materials.

Accessories
ATO welding machine accessories

Structure


Mig welder structure

Tips: What is The Difference Between AC Welding Machine and DC Welding Machine?
The output current is used to distinguish AC and DC. The more important weldments (such as boilers, pressure vessels and alloy structural steels) generally use DC welding machine, which has beautiful weld formation, stable arc, small splash, low air consumption, and general welding. The DC welding machine for alkaline welding rods has good crack resistance and mechanical properties, but the process performance is poor. The AC welding machine mainly welds low carbon steel and low strength low alloy structural steel. Generally, it is welded by welding acid electrode. The acid electrode can be used for both AC and DC, and the welding process performance is good, but the mechanical properties of the weld, especially the impact toughness is poor. The price of the DC welder equipment is slightly higher than that of the AC welder, and the durability is slightly poor and the maintenance cost is high.

Product reviews
My first plasma cutting machine
5
Hanson
Avatar
7/23/2019 11:43 PM
I choose 50A plasma cutting machine already has a period of time, constantly compare performance, various aspects information, I finally bought a week ago ATO arc plasma cutting machine, I don't like to buy too expensive electric welding machine, the price I can accept, simple to use, beautiful appearance, which surprised me, I probably can be received by a week's time. Of course, I will continue to study further, whether longevity is not guaranteed, this is a new plasma cutting machine, I hope my words can be a reference for those who are hesitant.
Was this review helpful? Yes No (0/0)
Solid plasma cutter, cuts well
5
Dexter
Avatar
8/13/2026 7:20 PM
I’ve used this plasma cutter for home garage projects. Love that it runs on both 110V and 220V household power. Cuts are fairly clean when you set current and gas pressure correctly.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Dual voltage arc welder output current with 10-50A, suitable for welding stainless steel, mild steel, aluminum and other metal material, ATO welding supplies manufacturer direct sales.

Specifications

ModelATO-WM-LTP5000D
Output PowerDC
Input Voltage110V/220V, +/15%, 1-PH, 50Hz/60Hz (Automatic dual frequency)
Input Current240V, 1-PH, 20A
Output Current10-50A
Power7.1 kVA
Power Factor0.73
Duty Cycle at 40℃ (104℉)60% at 50A, 240V
Dimension381mm*152.4mm*340.8mm
Weight11.8kg
Cutting MaterialMild Steel, Stainless Steel, Aluminum, etc
Welding Thickness1/2"
Gas SupplyClean, Dry, Oil-Free Argon
ColorRed
Warranty12 Months
Input Power Cable Length6' (1.8m)
Max Severance Thickness3/4"
Recommender Gas Inflet Flow Rate/Pressure3.6scfm at 65psi
AccessoriesPilot Arc Plasma Torch ( 9’5")
Plasma Consumables (installed on the torch head)
Air Filter/Regulator
Ground Clamp&Cable
Connections, (like air house etc.)
User Manual

Cut Chart

MaterialThicknessCurrent
inchesmmamps
Mild Steel10 gauge350
1/4650
3/81050
1/21250
5/81650
Stalinless Steel10 gauge350
1/4650
3/81050
1/21250
Aluminum1/8350
1/4650
3/81050
1/21250

Features:
1. 10-50 Amp AC/DC square-wave inverter TIG/Stick (MMA) welder.
2. Automatic dual voltage/ dual frequency (110/220Volt 50/60Hz).
3. High frequency start hand torch control and precise foot pedal welding heat control.
4. Suitable for welding stainless steel, mild steel, aluminum and other metal materials.

Accessories
ATO welding machine accessories

Structure


Mig welder structure

Tips: What is The Difference Between AC Welding Machine and DC Welding Machine?
The output current is used to distinguish AC and DC. The more important weldments (such as boilers, pressure vessels and alloy structural steels) generally use DC welding machine, which has beautiful weld formation, stable arc, small splash, low air consumption, and general welding. The DC welding machine for alkaline welding rods has good crack resistance and mechanical properties, but the process performance is poor. The AC welding machine mainly welds low carbon steel and low strength low alloy structural steel. Generally, it is welded by welding acid electrode. The acid electrode can be used for both AC and DC, and the welding process performance is good, but the mechanical properties of the weld, especially the impact toughness is poor. The price of the DC welder equipment is slightly higher than that of the AC welder, and the durability is slightly poor and the maintenance cost is high.

Product reviews
My first plasma cutting machine
5
Hanson
Avatar
7/23/2019 11:43 PM
I choose 50A plasma cutting machine already has a period of time, constantly compare performance, various aspects information, I finally bought a week ago ATO arc plasma cutting machine, I don't like to buy too expensive electric welding machine, the price I can accept, simple to use, beautiful appearance, which surprised me, I probably can be received by a week's time. Of course, I will continue to study further, whether longevity is not guaranteed, this is a new plasma cutting machine, I hope my words can be a reference for those who are hesitant.
Was this review helpful? Yes No (0/0)
Solid plasma cutter, cuts well
5
Dexter
Avatar
8/13/2026 7:20 PM
I’ve used this plasma cutter for home garage projects. Love that it runs on both 110V and 220V household power. Cuts are fairly clean when you set current and gas pressure correctly.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews