Hydrothermal synthesis reactor is a kind of closed container which can decompose insoluble substances. It can be used for low dose synthesis reaction.
Features:
- Thickening processing PTFE cover, not easy to soften.
- Beautiful appearance, reasonable structure and easy to operate.
- With PTFE liner, double care, acid and alkali, resistant to high temperature of 200 ℃.
Specification:
- Model: ATO-KH-500
- Capacity: 500ml
- Material: 304 stanless steel, PTFE chamber
- Maximun Pressure: 3 MPa
- Safe Working Temperatue: 200 ℃
- Heating and Cooling Rate: ≤5 ℃/min
- Net Weight: 12kg
- Dimension: 160*250 mm (φ*H)
Structure:

Application:

Tips: Hydrothermal Synthesis Reactor Troubleshooting
- Leaking. If you notice leaking from the reactor, first check the O-rings or gaskets for damage or wear. Replace them if necessary. Ensure that the reactor is properly sealed and that all connections are tight.
- Temperature control issues. If you are experiencing temperature control problems, check the temperature sensor for accuracy and proper placement. Ensure that the heating and cooling systems are functioning properly and that the temperature controller settings are correctly configured. If the temperature is not reaching the desired level, check for any blockages in the heater or temperature control lines.
- Reactor not sealing properly. If you are having trouble sealing the reactor, check for debris or contaminants on the sealing surfaces.
Product reviews
Durable and affordable reactor
Daniel
10/15/2025 12:54 AM
I purchased the 500ml stainless steel hydrothermal synthesis reactor for my lab experiments, and it has worked perfectly so far. The build quality is excellent — sturdy stainless steel exterior with a smooth finish, and the PTFE liner is very resistant to both acids and alkalis. It maintains stable performance even at 200 °C without any leakage or deformation. The structure is well-designed and easy to assemble and clean, which saves a lot of time during repeated experiments.
Was this review helpful? (0/0)
Dependable hydrothermal synthesis reactor
Barry
4/28/2026 7:15 PM
I use this hydrothermal synthesis reactor for synthesizing nanomaterials, and it’s performed flawlessly. The PTFE liner shows no signs of warping after repeated 200°C runs, and the steel casing is rugged. The safety margin feels generous, and cleaning the removable liner is straightforward.
Was this review helpful? (0/0)
Only registered users can write reviews