50 W DC Gear Motor, 3000 rpm, 12V/24V

$155.03
High performance 50W gear motor which consists of a brushless DC motor and 60 mm gearbox, provides 3000 rpm rated speed, 3300 rpm no-load speed, gear ratio available from 3:1 to 200:1, it can operate at 12/24 volt and deliver a peak torque of 0.48 Nm.
SKU: ATO-GEAR-DC50
*
*
*
Free Shipping
Delivery date: 20-30 days

ATO good quality DC gear motor is available in 12V, 24V DC voltage, up to 50 watt power, provides high torque at low speed. The DC brushless motor has rated speed of 3000 rpm and rated torque of 0.16 Nm, the 60 mm gearbox has a peak torque of 3 Nm.

50W DC gear motor specifications

ModelATO-D2BLD50-12ATO-D2BLD50-24
Power50W
Weight2.0 Kg
Voltage12V24V
Rated Speed3000 rpm3000 rpm
No-load Speed3300 rpm3300 rpm
Rated Current5.21A2.6A
Rated Torque0.16 N.m0.18 N.m
Peak Torque0.48 N.m0.48 N.m
No-load Current< 0.8A< 0.4A
Compatible Driver ModelBLD-300B (Click it to the product page)BLD-120A (Click it to the product page)
Protection GradeIP54
Motor Lead Length300mm
Temperature0~50℃
Gearbox Model2GN□K, Enter the gear ratio into the box (□) within the model name
Gear Ratio3, 5, 7.5, 10, 12.5, 15, 18, 20, 25, 30, 36, 40, 50, 60, 75, 90, 100, 120, 150, 180, 200

Note: Motor length, power, voltage and speed can be customized according to your requirements under the allowed circumstance of adoptable dimension.

The allowable torque with a gearbox

Gear Ratio357.51012.51518202530364050607590100120150180200
Speed (r/min)100060040030024020016715012010083.3375605040333025201715
Allowable Torque (N.m)0.390.640.971.291.611.932.322.322.9333333333333
Allowable Torque (kgf.cm)3.866.449.6612.8816.119.3223.1823.2129.02303030303030303030303030

Note:

  • The values colored "Red" indicate that the gearbox and the DC motor are running in the same direction, and the other values are in the opposite direction.
  • When it is desired to reduce the speed further than the gear ratio in the table above, an intermediate speed reducer with a gear ratio of 10 can be installed between the motor and the gearbox.

Wiring Definition

50W DC motor wiring explanation

Dimension (Unit: mm)

50W DC Motor Dimension:
50W gear motor dimension

Gearbox Dimension:

50W gearbox dimension

L1=41.5mm

Details

50W DC Gear Motor Details

Tips: How to install and operate the gear motor?

Installation and operation of the machine contains a certain risk, then what should we pay attention to when installing and operating the gear motor?

  1. The gear motor should be protected from shock during the installation process. When installing parts on the output shaft of the gear motor, it’s not allowed to knock or press directly on the output shaft.
  2. The wires shall be straight rather than curved, so as to avoid the poor conductivity in the gear motor.
  3. It’s not allowed to rotate the gear box forcefully from the output shaft, otherwise the gears may be damaged. When fixing transmission structures on the output shaft of the gear motor with binders, the bearing can not be pasted. When installing a circular gear motor or planetary gear motor, the length of mounting screw shall be controlled, over length screw may damage the parts in the gear motor.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

24V DC Gear Motors with High Torque and Low Speed

ATO offers a wide range of DC gear motors with different voltage options (12V/24V/36V/48V), power parameters (30W to 2000W) and torque ranges from 0.1Nm to 300 Nm. The 24V model shown in the video is shown in more detail using a brushless DC motor controller (12V ~ 30V).

Product reviews
12V DC gear motor with enough torque
5
Sylvain
Avatar
12/23/2020 6:30 PM
Using 12v supply to run this 50w dc gear motor, it is generating enough torque to move my drill press table up and down. Have used for about 3 weeks of intermittent use, and so far, so good. Longevity remains to be demonstrated. At this point, I would buy another of these if needed for a similar purpose.
Was this review helpful? Yes No (0/0)
High quality DC gear motor
5
Daye
Avatar
5/18/2022 7:31 PM
We tested this 50W gear motor in our engineering printer for hours at a time and it performed flawlessly. Very happy to have found it. I would highly recommend this DC gear motor!!
Was this review helpful? Yes No (0/0)
50W DC gear motor works perfectly
5
Keran
Avatar
5/23/2022 7:09 PM
Very powerful little 50W DC gear motor just make sure you get proper rpm you are looking for,which I did, also added a speed control works perfectly.
Was this review helpful? Yes No (0/0)
Great little gear motor for the money
5
Teekay
Avatar
11/9/2022 11:01 PM
I have bought this 50W DC gear motor for two months and so far there has been no problem. I would recommend as this particular motor is being used in a motorized lift table and does its job well.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

ATO good quality DC gear motor is available in 12V, 24V DC voltage, up to 50 watt power, provides high torque at low speed. The DC brushless motor has rated speed of 3000 rpm and rated torque of 0.16 Nm, the 60 mm gearbox has a peak torque of 3 Nm.

50W DC gear motor specifications

ModelATO-D2BLD50-12ATO-D2BLD50-24
Power50W
Weight2.0 Kg
Voltage12V24V
Rated Speed3000 rpm3000 rpm
No-load Speed3300 rpm3300 rpm
Rated Current5.21A2.6A
Rated Torque0.16 N.m0.18 N.m
Peak Torque0.48 N.m0.48 N.m
No-load Current< 0.8A< 0.4A
Compatible Driver ModelBLD-300B (Click it to the product page)BLD-120A (Click it to the product page)
Protection GradeIP54
Motor Lead Length300mm
Temperature0~50℃
Gearbox Model2GN□K, Enter the gear ratio into the box (□) within the model name
Gear Ratio3, 5, 7.5, 10, 12.5, 15, 18, 20, 25, 30, 36, 40, 50, 60, 75, 90, 100, 120, 150, 180, 200

Note: Motor length, power, voltage and speed can be customized according to your requirements under the allowed circumstance of adoptable dimension.

The allowable torque with a gearbox

Gear Ratio357.51012.51518202530364050607590100120150180200
Speed (r/min)100060040030024020016715012010083.3375605040333025201715
Allowable Torque (N.m)0.390.640.971.291.611.932.322.322.9333333333333
Allowable Torque (kgf.cm)3.866.449.6612.8816.119.3223.1823.2129.02303030303030303030303030

Note:

  • The values colored "Red" indicate that the gearbox and the DC motor are running in the same direction, and the other values are in the opposite direction.
  • When it is desired to reduce the speed further than the gear ratio in the table above, an intermediate speed reducer with a gear ratio of 10 can be installed between the motor and the gearbox.

Wiring Definition

50W DC motor wiring explanation

Dimension (Unit: mm)

50W DC Motor Dimension:
50W gear motor dimension

Gearbox Dimension:

50W gearbox dimension

L1=41.5mm

Details

50W DC Gear Motor Details

Tips: How to install and operate the gear motor?

Installation and operation of the machine contains a certain risk, then what should we pay attention to when installing and operating the gear motor?

  1. The gear motor should be protected from shock during the installation process. When installing parts on the output shaft of the gear motor, it’s not allowed to knock or press directly on the output shaft.
  2. The wires shall be straight rather than curved, so as to avoid the poor conductivity in the gear motor.
  3. It’s not allowed to rotate the gear box forcefully from the output shaft, otherwise the gears may be damaged. When fixing transmission structures on the output shaft of the gear motor with binders, the bearing can not be pasted. When installing a circular gear motor or planetary gear motor, the length of mounting screw shall be controlled, over length screw may damage the parts in the gear motor.
Product reviews
12V DC gear motor with enough torque
5
Sylvain
Avatar
12/23/2020 6:30 PM
Using 12v supply to run this 50w dc gear motor, it is generating enough torque to move my drill press table up and down. Have used for about 3 weeks of intermittent use, and so far, so good. Longevity remains to be demonstrated. At this point, I would buy another of these if needed for a similar purpose.
Was this review helpful? Yes No (0/0)
High quality DC gear motor
5
Daye
Avatar
5/18/2022 7:31 PM
We tested this 50W gear motor in our engineering printer for hours at a time and it performed flawlessly. Very happy to have found it. I would highly recommend this DC gear motor!!
Was this review helpful? Yes No (0/0)
50W DC gear motor works perfectly
5
Keran
Avatar
5/23/2022 7:09 PM
Very powerful little 50W DC gear motor just make sure you get proper rpm you are looking for,which I did, also added a speed control works perfectly.
Was this review helpful? Yes No (0/0)
Great little gear motor for the money
5
Teekay
Avatar
11/9/2022 11:01 PM
I have bought this 50W DC gear motor for two months and so far there has been no problem. I would recommend as this particular motor is being used in a motorized lift table and does its job well.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews