50mm Worm Gearbox, Ratio 5:1 to 100:1

$536.05
Competitive price worm gearbox has a 50mm center distance and a 1400 rpm rated speed. The reduction ratio can be customized to 5:1/ 7.5:1/ 10:1/ 15:1/ 20:1, etc., with a maximum of 100:1. It is convenient and simple to connect to motors, especially when used with ATO 120W-750W asynchronous motors; the effect is better.
SKU: ATO-WGR50
*
*
Free Shipping
Delivery date: 6-12 days

The NMRV worm gearbox reducer provided by ATO is a speed reducer with low noise, high efficiency, and low price. 200W rated power, 40:1/ 50:1/ 60:1/ 80:1 reduction ratio, IP65.

Specification

ModelATO-NMRV050
Reduction ratio5:1/ 7.5:1/ 10:1/ 15:1/ 20:1/ 25:1/ 30:1/ 40:1/ 50:1/ 60:1/ 80:1/ 100:1 (optional)
Center distance50mm
Rated speed1400 rpm
Protection gradeIP65
CertificationCE
ColorBlue
Warranty1 year
Material

Housing: Aluminum alloy

Turbine: 20 Cr

Worm: Tin bronze

Dimension (Unit: mm)

50mm worm gear reducer outline dimensional drawing

Details

Worm Gearbox Details

Customizable accessories

ATO worm gear reducer customizable accessories: Asynchronous motor, flange, output shaft

Mounting position

50mm worm gearbox mounting position

Tips: 50mm worm gearbox installing tips

  • Clean the shaft before installing the 50mm worm gearbox reducer, and check whether the installation shaft has bruises or dirt, if any, it should be cleaned up.
  • Before installing the 50mm worm gearbox, confirm whether the motor and reducer are intact, and strictly check whether the size of each part connecting the motor and the reducer matches.
  • When installing the transmission part on the output shaft, it is not allowed to hit with a hammer. Usually the assembly fixture and the internal thread of the shaft end are used to press the transmission part in with bolts, otherwise it may cause damage to the internal parts of the 50mm worm gearbox speed reducer.
  • The blockage should be cleared before use to ensure that the 50mm center distance speed reducer is discharged from the body during operation. Otherwise, the long-term operation of the 50mm worm gearbox reducer will cause the gas in the reducer to swell the oil seal, and even cause the reducer to leak oil.
Product reviews
Works nicely in our automation setup
5
Richard
Avatar
8/26/2026 7:09 PM
We installed this reducer on a compact automation machine where space was limited. The size worked well for the layout, and the gearbox provides the slower, controlled movement we needed. It has been operating daily without any noticeable problems. Pretty happy with how it has performed.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The NMRV worm gearbox reducer provided by ATO is a speed reducer with low noise, high efficiency, and low price. 200W rated power, 40:1/ 50:1/ 60:1/ 80:1 reduction ratio, IP65.

Specification

ModelATO-NMRV050
Reduction ratio5:1/ 7.5:1/ 10:1/ 15:1/ 20:1/ 25:1/ 30:1/ 40:1/ 50:1/ 60:1/ 80:1/ 100:1 (optional)
Center distance50mm
Rated speed1400 rpm
Protection gradeIP65
CertificationCE
ColorBlue
Warranty1 year
Material

Housing: Aluminum alloy

Turbine: 20 Cr

Worm: Tin bronze

Dimension (Unit: mm)

50mm worm gear reducer outline dimensional drawing

Details

Worm Gearbox Details

Customizable accessories

ATO worm gear reducer customizable accessories: Asynchronous motor, flange, output shaft

Mounting position

50mm worm gearbox mounting position

Tips: 50mm worm gearbox installing tips

  • Clean the shaft before installing the 50mm worm gearbox reducer, and check whether the installation shaft has bruises or dirt, if any, it should be cleaned up.
  • Before installing the 50mm worm gearbox, confirm whether the motor and reducer are intact, and strictly check whether the size of each part connecting the motor and the reducer matches.
  • When installing the transmission part on the output shaft, it is not allowed to hit with a hammer. Usually the assembly fixture and the internal thread of the shaft end are used to press the transmission part in with bolts, otherwise it may cause damage to the internal parts of the 50mm worm gearbox speed reducer.
  • The blockage should be cleared before use to ensure that the 50mm center distance speed reducer is discharged from the body during operation. Otherwise, the long-term operation of the 50mm worm gearbox reducer will cause the gas in the reducer to swell the oil seal, and even cause the reducer to leak oil.
Product reviews
Works nicely in our automation setup
5
Richard
Avatar
8/26/2026 7:09 PM
We installed this reducer on a compact automation machine where space was limited. The size worked well for the layout, and the gearbox provides the slower, controlled movement we needed. It has been operating daily without any noticeable problems. Pretty happy with how it has performed.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews