50 kVA Single Phase Automatic Voltage Stabilizer

$3,855.48
1-phase voltage stabilizer is 50 kVA capacity, automatic stabilize input voltage range 95-125V/ 190-250V AC to 110V±3%/ 220V±3% output. It has excellent features, such as small waveform distortion, high efficiency, high power factor, free from the effect or frequency variation of supply.
SKU: ATO-AVS-1P50K
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 10-16 days

50 kVA Single Phase Fully Automatic Voltage Stabilizer consists of a contact voltage regulator, electric servo motor and auto-control circuit as well. The auto-sampling circuit sends out a signal to run the servo motor and adjust the position of the carbon brush, it will ensure output voltage steady operations.

Features

  • Wide input voltage: 95-125V/ 190-250V AC or customize
  • The high accuracy of the output voltage: 110V±3%/ 220V±3%, other voltages can be customized
  • High technology: Programmed control computerized
  • Perfect protection function: Over/low voltage protection, over-heat/load protection, short circuit protection
  • Fashion design: LCD display that can show all protection functions i.e. input voltage, output voltage, temperature, loading, fault indication, and so on.

Specifications

Product NameAutomatic Voltage Stabilizer
Model NumberATO-TND/JSW-50kVA
Capacity50 kVA (The power capacity of the voltage stabilizer needs to be 1.5~2 times greater than the load power)
PhaseSingle Phase
Input Voltage Range±15% tolerance of output voltage
Output Voltage*220V±3%/ 230V±3%/ 240V±3%/ 110V±3% (Optional)
Adjust Time<1sec. (Against 10% input voltage deviation)
Frequency50Hz/60Hz
Current TypeAC
Protection Overvoltage<246±4V
Temperature Rise<60°C
Ambient Temperature-10°C~+40°C
Insulation Resistance≥5MΩ
Temperature Protection110℃±10℃
Relative Humidity<95%
Wave Form DistortionNo additional waveform distortion
Load Power Factor0.8
Efficiency≥90%
DisplayLCD
Protection GradeIP20
Dielectric Strength1500V/min
CertificationCE
Warranty Period12 months
Weight175 Kg
Size630*430*1020mm
Note: The provided 50 kVA voltage stabilizer is 1-phase (L, N, G) by Europe standard. We can customize the split phase (L1, L2 + G) like the USA standard, just confirm with us by email after ordering.

Details

50KVA Single Phase Automatic Voltage Stabilizer Details

6 tips for using an AC voltage stabilizer

Because of the complexity of the urban power supply environment and high power load, in order to make the power supply system operate normally no matter when the power consumption is low or high. AC voltage stabilizer plays a good role in the stability.

In real life, many people do not understand the precautions in the use of the voltage stabilizer. Here is a brief description:

  1. The AC voltage stabilizer should avoid violent shaking in use.
  2. In order to maintain its normal operation, the AC voltage stabilizer should be equipped with enough capacity of connecting wires.
  3. In order to ensure the safety of the AC voltage stabilizer in use, the grounding wire cannot be removed.
  4. The AC voltage stabilizer should be maintained regularly. The output accuracy of the AC voltage stabilizer will be affected by dust accumulation.
  5. In the process of using the voltage stabilizer, if an abnormal operation is found, the power supply shall be cut off immediately to check the cause.
  6. When debugging the AC voltage stabilizer, the load should be increased gradually and observed closely to avoid overload during the test.
Product reviews
Items provided by 50kVA single phase automatic voltage stabilizer
5
Nchottie
Avatar
5/30/2021 9:08 PM
Can you proivde 50kVA single phase automatic voltage stabilizier with internal isolation transformer, to set up the voltage and stabilize as well?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can proivide.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

50 kVA Single Phase Fully Automatic Voltage Stabilizer consists of a contact voltage regulator, electric servo motor and auto-control circuit as well. The auto-sampling circuit sends out a signal to run the servo motor and adjust the position of the carbon brush, it will ensure output voltage steady operations.

Features

  • Wide input voltage: 95-125V/ 190-250V AC or customize
  • The high accuracy of the output voltage: 110V±3%/ 220V±3%, other voltages can be customized
  • High technology: Programmed control computerized
  • Perfect protection function: Over/low voltage protection, over-heat/load protection, short circuit protection
  • Fashion design: LCD display that can show all protection functions i.e. input voltage, output voltage, temperature, loading, fault indication, and so on.

Specifications

Product NameAutomatic Voltage Stabilizer
Model NumberATO-TND/JSW-50kVA
Capacity50 kVA (The power capacity of the voltage stabilizer needs to be 1.5~2 times greater than the load power)
PhaseSingle Phase
Input Voltage Range±15% tolerance of output voltage
Output Voltage*220V±3%/ 230V±3%/ 240V±3%/ 110V±3% (Optional)
Adjust Time<1sec. (Against 10% input voltage deviation)
Frequency50Hz/60Hz
Current TypeAC
Protection Overvoltage<246±4V
Temperature Rise<60°C
Ambient Temperature-10°C~+40°C
Insulation Resistance≥5MΩ
Temperature Protection110℃±10℃
Relative Humidity<95%
Wave Form DistortionNo additional waveform distortion
Load Power Factor0.8
Efficiency≥90%
DisplayLCD
Protection GradeIP20
Dielectric Strength1500V/min
CertificationCE
Warranty Period12 months
Weight175 Kg
Size630*430*1020mm
Note: The provided 50 kVA voltage stabilizer is 1-phase (L, N, G) by Europe standard. We can customize the split phase (L1, L2 + G) like the USA standard, just confirm with us by email after ordering.

Details

50KVA Single Phase Automatic Voltage Stabilizer Details

6 tips for using an AC voltage stabilizer

Because of the complexity of the urban power supply environment and high power load, in order to make the power supply system operate normally no matter when the power consumption is low or high. AC voltage stabilizer plays a good role in the stability.

In real life, many people do not understand the precautions in the use of the voltage stabilizer. Here is a brief description:

  1. The AC voltage stabilizer should avoid violent shaking in use.
  2. In order to maintain its normal operation, the AC voltage stabilizer should be equipped with enough capacity of connecting wires.
  3. In order to ensure the safety of the AC voltage stabilizer in use, the grounding wire cannot be removed.
  4. The AC voltage stabilizer should be maintained regularly. The output accuracy of the AC voltage stabilizer will be affected by dust accumulation.
  5. In the process of using the voltage stabilizer, if an abnormal operation is found, the power supply shall be cut off immediately to check the cause.
  6. When debugging the AC voltage stabilizer, the load should be increased gradually and observed closely to avoid overload during the test.
Product reviews
Items provided by 50kVA single phase automatic voltage stabilizer
5
Nchottie
Avatar
5/30/2021 9:08 PM
Can you proivde 50kVA single phase automatic voltage stabilizier with internal isolation transformer, to set up the voltage and stabilize as well?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can proivide.
Only registered users can write reviews