50 kVA Voltage Stabilizer Features
- Three phase 4-line 175V-265V (phase voltage) 304V-456V AC (line voltage) of wide input voltage range, 380V output
- High technology with computer programming control
- The high accuracy of the output voltage (output voltage can be customized)
- Perfect protection function: Over/ low voltage protection, overheat/ load protection, short circuit protection
- High efficiency: More than 95%
50 kVA 3 phase Industrial AC Automatic Voltage Stabilizer is widely used in post and telecommunications, department stores, elevators, hospitals, schools, printing, securities, and other occasions where all need normal voltage to ensure, such as workshop mines medium enterprises, some of the important equipment and computer power and support.
| Model Number | ATO-SBW/ZBW-50K | ||||
| Capacity | 50 kVA (The power capacity of the voltage stabilizer needs to be 1.5~2 times greater than the load power) | ||||
| Phase | 3 Phase 4-line | ||||
| Input Voltage Range | ±15% tolerance for all standard output voltages above 380V. ±20% tolerance for required 380V output and all standard voltages below. | ||||
| Output Voltage | 3 phase 380V (Optional: 110V/ 120V/ 208V/ 220V/ 230V/ 240V/ 400V/ 415V/ 440V/ 460V/ 480V) | ||||
| Output Accuracy | ±2~4%/ ±1% (Optional) * In case of output accuracy of +/- 2-4%, the voltage stabilizer will be servomotor based, and in case of output accuracy of +/- 1%, the voltage stabilizer would be SCR based. | ||||
| Frequency | 50Hz/60Hz | ||||
| Current Type | AC | ||||
| Efficiency | ≥95% | ||||
| Response Time | ≤1.5S | ||||
| Ambient Temperature | -15°C~+40°C | ||||
| Cooling Method | Air-cooled | ||||
| Insulation Resistance | ≥5MΩ | ||||
| Electrical Intensity | Without breakdown and flashover phenomena at power frequency sine voltage 2000V for 1 min | ||||
| Overload Capacity | Overload current (%) | Duration (min) | |||
| 20 | ≤60 | ||||
| 40 | ≤15 | ||||
| 60 | ≤5 | ||||
| Waveform Distortion | Non-lack fidelity waveform | ||||
| Protection | Over-voltage, over-current, feed phases | ||||
| Protection Grade | IP 24 | ||||
| Warranty | 12 months | ||||
| Certificate | ISO9001:2008, CE | ||||
| Weight | 350 Kg | ||||
| Package Size | 800x620x1350 mm | ||||
3 Phase Voltage Stabilizer Schematic Diagram

Industrial Voltage Stabilizer Inner Detail

Tips: Why is the voltage of a 50kVA industrial voltage stabilizer unstable?
- The input voltage is too high or too low. The voltage range of 50kVA three-phase instrial voltage stabilizer is 304V-456V. If the input voltage exceeds the regulated range or is very low, the automatic protection system of the regulated power supply will start, thus causing the output voltage to be unstable or stop working directly.
- The input voltage is unbalanced in three phases, that is, the voltage of one of the three phases of the stabilizer is unstable, which will also lead to the output voltage of the stabilizer is unstable.
Product reviews
This is a fantastic device
Kaled Serdio
12/19/2019 3:00 AM
This is a fantastic device. We live in an area where the power fluctuates. This is not good for electronics. This automatic voltage stabilizer works great in keeping our electronics safe.
Was this review helpful? (0/0)
Confirm before buying
Nahum Ayestas
12/28/2020 6:24 PM
I see the spec on this 50kVA 3 phase voltage stabilizer that states /- 1%. The question I have is for input voltage changes of, say -(1-2)%, what is the expected output voltage variation? I would assume at least 50% to 80% of loading capacity.
Also, what impact would be on the output if the above 1-2% voltage fluctuation is fast… what is the expected output fluctuations for the first few cycles of the input fluctuation?
Also, what impact would be on the output if the above 1-2% voltage fluctuation is fast… what is the expected output fluctuations for the first few cycles of the input fluctuation?
Was this review helpful? (0/0)
Problems with machine heating
james
1/8/2024 12:48 AM
We are running a CNC Router. This has a high-speed motor starting and stopping as well as vacuum pumps starting and stopping. Our power supply ranges from 495 to 468 volts. Which is within range for 5% or - 480 volts. However, when we check power leg to leg, we consistently have 1 leg of power that is lower than the other 2 legs. Usually within 2 - 3% though. The machinery company would like to see all 3 legs of power closer equal. The stabilizer does that, but it also stabilizes and tries to keep it within 1 - 2% accuracy. I think that's asking too much of any stabilizer with the machine we have attached to it. It just can't quite keep up. Our power accuracy is fine for the most part. I just wish we could level out the power leg to leg. The stabilizer keeps up for a while but eventually, it can't keep up, and it overheats. and trips the breaker. What's this for?
Was this review helpful? (0/0)
Only registered users can write reviews