Note: This pressure relief valve cannot be used for drinking water.
A pressure relief valve with DN125 nominal diameter, pressure rating is PN16, the shell test pressure is 2.4 MPa. The pressure reducing valve automatically opens at a set pressure and provides proportional and slow pressure relief.
Features
- Pilot-operated valves for limiting a system pressure
- Operation using proportional solenoid
- Maximum pressure limitation
- Valve and control electronics from a single source
- Little manufacturing tolerance of the command value
- Pressure characteristic curve
Details

Specification
- Model: ATO-200X-DN125
- Size: 5 inch
- Nominal diameter: DN125
- Structural form: Diaphragm type
- Pressure rating: PN16
- Shell test pressure: 2.4MPa
- Sealing test pressure: 1.76MPa
- Ambient temperature: ≤80℃
- Connection method: Flange
- Medium: Water
- Valve body material: Ductile iron QT450
Dimension

| Dimension | L | D2 | D1 | x-n | T | F | D |
| DN125 | 306mm | 250mm | 210mm | 8-φ19 | 20mm | 3mm | 184mm |
Installation

Notes
- It is recommended to install an exhaust valve on the top of the riser to make the pressure reducing valve work more smoothly.
- Before installing the pressure relief valve, check the valve for unusual items and be sure to flush the pipeline.
- Installation method: Horizontal or vertical installation, single valve set.
Pressure Relief Valve Application

Tips: What is the difference between a direct and pilot-operated relief valve?
The main difference between direct-acting and pilot solenoids is that direct-acting solenoid valves have a direct connection with the opening and closing armature, whereas pilot-operated valves employ the use of the process fluid to assist in piloting the operation of the valve.
Only registered users can write reviews