Reasonable price 4 kW power converter, with input & output frequency 50Hz/60 Hz, convert voltage 110V/ 120V/ 220V/ 230V/ 240V/ 380V/ 415V/ 440V/ 480V AC input to 220V/ 380V/ 400V/ 415V/ 440V/ 480V AC output, provides increased reliability and higher efficiency, make this converter ideal for a wide range of applications.
Note:
- When the load is a motor, the phase converter should be more than 5~7 times the motor capacity.
- When the load is soft start + motor, the phase converter should be more than 3 times the motor capacity.
- When the load is VFD + motor, the phase converter should be more than 1.5~2 times the motor capacity.
5 hp Converter Specification
| Model | ATOBZT-4kW | |
| Power | 5 hp (4 kW) | |
| Weight | 105kg | |
| Output Waveform | Standard pure sine wave | |
| Wide Voltage Input | 80-320V AC (can customization) | |
| Input Voltage | Optional: 110V/ 120V/ 220V/ 230V/ 240V/ 380V/ 415V/ 440V/ 480V single phase 2 wire | |
| Input Current | 12.3A at 230V (Input Current=Power/Input Voltage/1.414) | |
| Output Voltage | Optional: 220V/ 380V/ 400V/ 415V/ 440V/ 480V 3 phase 4 wire+PE | |
| Output Current | 5.8A at 400V | |
| Input Frequency | 50Hz/ 60Hz | |
| Output Frequency | 50Hz/ 60Hz | |
| Startup Mode Selection | Stable frequency step-down start or frequency, start can be selected on the LCD screen settings | |
| Frequency Stability | ≤0.01% | |
| Load Regulation | ≤3% | |
| THD | ≤2% (Linear load) | |
| Phase Angle | 120°±1° | |
| Crest Factor Ratio | 3:1 | |
| Circuit Mode | IPM module, SVPWM modulation | |
| LCD Display | Output voltage, output current, output frequency, output power, fault code, time temperature, startup mode selection, setting parameters | |
| Protection | Input under voltage, overvoltage, output over-current, short circuit, overheating etc. | |
| Protective Reaction Time | ≤2ms | |
| Machine Efficiency | ≥94% | |
| Insulation Properties | 1800V AC/ 10mA/1 min | |
| Insulation Impedance | 500V DC/ 50MΩ | |
| Cooling Method | Forced air cooling | |
| Noise | 1m> 60dB | |
| Ambient Temperature | -25℃~+55℃ | |
| Humidity | 0~95% (No condensation) | |
| Size | L | 540mm |
| W | 540mm | |
| H | 760mm | |
Single Phase
Split phase
Details

5 hp Converter Features

Product reviews
Satisfied quality
Adam
3/6/2019 7:39 PM
This single phase to 3 phase converter is used for a CNC tube benders of our factory. The machines run quiet and compact after this unit applied. It is really easy to wire up the converter just follow the manufacturer's instructions. I am satisfied with the quality and safety of this converter.
Was this review helpful? (0/0)
ATO recommended 5hp single phase to three phase converter
Pike
4/22/2021 9:10 PM
If I use your 1-ph to 3-ph phase converter to run amotor with 3hp capacity, what will be recommended phase converter capacity to run this motor with activiting VFD start feature inside the phase converter?
Was this review helpful? (0/0)
Only registered users can write reviews