40W 12V 3000rpm DC Brushed Vibration Motor with Speed Controller

$421.87
Adjustable speed dc brushed vibration motor for sale, 40W, 12 volt, 0.5 kN force, 3000rpm, speed controller is optional, IP65, waterproof and can withstand low-pressure water jets, aluminum alloy shell, sturdy and shockproof, long service life.
SKU: ATO-DCVBM-5012
Free Shipping
Delivery date: 6-12 days

40W small DC brushed vibration motor, rated current 3.2A, 12V voltage, with speed controller, IP65, thick aluminum alloy paint for motor shell, super waterproof sealing ring, strong seismic capacity.

Specification

ModelATO-MVB-50DC12
Volatge12V
Current3.2A
Power40W
Speed3000 rpm
Force50 Kg, 0.5 kN
Frame No8
Protection LevelIP65
Insulation GradeF
Weight6kg
CertificateCE

40W DC 12V Brushed Vibration Motor Dimension (unit: mm)
40W dc brushed vibration motor dimension

 

ABCDRFGHLKMNCable Gland
369317811384.510943802433.582M16*1.5

Tips: How to adjust the excitation force of the horizontal vibration motor?

1. Loosen the fastening screws of the protective cover, and remove the protective covers at both ends.
2. The exciting force is less than MV50-2.
3. Vibration motors with excitation force greater than or equal to MV50-2, MV50-4, MV50-6, MV30-8 (including these four specifications), the outer eccentric block is a fixed block, which is fixed on the shaft with a key and cannot be rotated . The inner eccentric block is an adjustable block, and the outer surface is equipped with a scale indicating the percentage of the maximum excitation force, which is pressed on the motor shaft with a fastening bolt. Loosen the compression bolts of the inner eccentric blocks on both sides, and rotate the inner eccentric blocks on both sides in the same direction, so that the excitation force scale on the inner eccentric block is aligned with the slit on the outer eccentric block and adjusted to the required excitation force. Tighten the compression bolts of the inner eccentric block and install the protective cover.
Note: Except for special applications, the positions of the eccentric blocks at both ends of the vibrating motor shaft must be corresponding, and the percentages of the eccentric blocks at both ends must be set equal, otherwise the vibrating motor will generate a huge staggered excitation force and damage the vibration machinery of the motor.

Product reviews
I really like this 40W brushed vibration motor
5
Belinez
Avatar
12/2/2021 6:24 PM
After comparing several websites, I decided to buy it on the ATO.com website. I really like this 40W brushed vibration motor. It completely exceeds my expectations.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

40W small DC brushed vibration motor, rated current 3.2A, 12V voltage, with speed controller, IP65, thick aluminum alloy paint for motor shell, super waterproof sealing ring, strong seismic capacity.

Specification

ModelATO-MVB-50DC12
Volatge12V
Current3.2A
Power40W
Speed3000 rpm
Force50 Kg, 0.5 kN
Frame No8
Protection LevelIP65
Insulation GradeF
Weight6kg
CertificateCE

40W DC 12V Brushed Vibration Motor Dimension (unit: mm)
40W dc brushed vibration motor dimension

 

ABCDRFGHLKMNCable Gland
369317811384.510943802433.582M16*1.5

Tips: How to adjust the excitation force of the horizontal vibration motor?

1. Loosen the fastening screws of the protective cover, and remove the protective covers at both ends.
2. The exciting force is less than MV50-2.
3. Vibration motors with excitation force greater than or equal to MV50-2, MV50-4, MV50-6, MV30-8 (including these four specifications), the outer eccentric block is a fixed block, which is fixed on the shaft with a key and cannot be rotated . The inner eccentric block is an adjustable block, and the outer surface is equipped with a scale indicating the percentage of the maximum excitation force, which is pressed on the motor shaft with a fastening bolt. Loosen the compression bolts of the inner eccentric blocks on both sides, and rotate the inner eccentric blocks on both sides in the same direction, so that the excitation force scale on the inner eccentric block is aligned with the slit on the outer eccentric block and adjusted to the required excitation force. Tighten the compression bolts of the inner eccentric block and install the protective cover.
Note: Except for special applications, the positions of the eccentric blocks at both ends of the vibrating motor shaft must be corresponding, and the percentages of the eccentric blocks at both ends must be set equal, otherwise the vibrating motor will generate a huge staggered excitation force and damage the vibration machinery of the motor.

Product reviews
I really like this 40W brushed vibration motor
5
Belinez
Avatar
12/2/2021 6:24 PM
After comparing several websites, I decided to buy it on the ATO.com website. I really like this 40W brushed vibration motor. It completely exceeds my expectations.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews