Affordable 400 Watt pure sine wave power inverter for sale. This powerful inverter converts 12V/24V DC to 220V/110V AC and delivers pure sine wave output, ensuring your sensitive electronics operate smoothly and safely. With very low idle consumption and multiple protections, it’s the ideal power solution.
Specification
| Model | ATO-P400 | |||
| Output Power | 400W | |||
| Peak Power | 800W | |||
| Output Voltage* | 110V/220V (±5%) | |||
| Output Frequency | 50/60Hz±3% | |||
| No-load Current (less-than) | ≤0.5A | |||
| Output Wave | Pure sine wave | |||
| USB Port | 5V 2.1A | |||
| Protection | Under-voltage reminder, automatic shutdown, over-temperature, over-voltage, short circuit, reverse polarity, leakage, overload protection | |||
| Input Voltage | 12V/24V | |||
| Fuse | 50A*1/25A*1 | |||
| Cooling Fan | With load and temperature control | |||
| Weight (net) | 1.4kg | |||
| Humidity | ≤90%, non-condensing | |||
| Size | 215*155*58mm | |||
| Certificate | CE-EMC/LVD,ROHS | |||
Features
- 400W output power and 800W peak power
- Converting 12V/24V DC to 220V/110V AC efficiently
- USB ports for various devices
- Aluminum alloy shell with good heat dissipation
- Intelligent control chip and <10ms transfer time
- Multiple protections against short-circuit, overload, over-temperature, over-voltage, and reverse polarity
- Pure sine wave, stable power output
- Cooling fan with excellent thermal management
Details


Wiring Diagram

Applications

Tips: How to reset this 400W pure sine wave inverter after overload protection is triggered?
- First, disconnect all connected load devices and check whether the total power exceeds 400W (or if the starting power exceeds the limit) to rule out "equipment overload" issues.
- Next, inspect the input voltage (e.g., whether the car battery voltage is below 10.5V or above 15V, as battery undercharge/overcharge may trigger low/high voltage protection, which exhibits symptoms similar to overload protection). If no issues are found, turn off the 400 Watt pure sine wave power inverter's power switch and wait 3-5 minutes (to allow the internal protection circuit to reset).
- Then, turn the switch back on, and the inverter should resume normal operation. If the protection is repeatedly triggered, further troubleshooting of the load or input power source for potential faults is required.
Product reviews
Reliable and well-built inverter
Caleb
11/18/2025 5:58 PM
I’ve been using this 400W pure sine wave power inverter for a while now, and it has performed better than I expected. It converts 12V DC to 110V AC very efficiently, and the low idle consumption helps preserve battery power during longer use. The AC and USB outputs are convenient—I can run small appliances while also charging my phone at the same time. The intelligent cooling fan is quiet, and the built-in protections and fuse give me confidence when using it outdoors or in my vehicle.
Was this review helpful? (0/0)
Only registered users can write reviews