4-wire Bipolar Nema 17 Stepper motor, 3.6V 1.68A, 2 phase

$68.25
High precision and brand new 4-wire bipolar stepper motor, size in Nema 17, 1.8 deg. step angle (200 steps/rev), 2 phase, body in 60mm, manufacturer direct sale.
SKU: ATO-STEP-6017168
*
Free Shipping
Delivery date: 6-12 days

4-wire 2 phase bipolar Nema 17 stepper motor, 3.6V 1.68A, resolution of 1.8 degree/step, torque of 85 oz/inch.

Specifications

Electrical SpecificationModelATO60-1684A
Matched the Driver ModelATODSP42 (Click it to see more info)
Step Angle1.8°
Holding Torque6.0kg-cm (85oz.in)
Voltage3.6V
Rated Current/phase1.68A
Phase Resistance3Ω
Inductance6mH
Rotor Inertia68g-cm2
Physical SpecificationFrame Size42 x 42mm
Length60mm
Shaft DiameterΦ5mm
Shaft Length22mm
Motor Leads4
Weight0.48kg
Technical ParametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max. (rated current, 2 phase on)
Ambient Temperature-10℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength1Min. 500VAC·5mA
Shaft Radial Play0.06Max. 450g
Shaft Axial Play0.08Max. 450g
Quality AssuranceWarranty Period12 months
CertificateCE, ROHs, ISO/SGS9001

Nema 17 Stepper Motor Dimension (Unit=mm)

Nema 17 stepper motors dimension

L1=24mm, Lmax=60mm

Nema 17 Stepper Motor Wiring Diagram

Nema 17 stepper motors wiring diagram

Tips: What is holding torque and detent torque?

  1. Holding torque indicates the torque locking the rotor when the stepper motor is powered on but not rotating. It is one of most parameters for the stepper motor. The torque of the stepper motor at low velocity usually approaches the holding torque. As the output torque of stepper motor is gradually attenuated along with the increase in velocity while output power is also increased along with the increase in velocity. For examples, the rotor locks the rotor under the circumstance that the stepper motor is not powered on.
  2. Detent torque indicates the torque locking the rotor under the circumstance that the stepper motor is not powered on.
Product reviews
Works well
5
Shaun
Avatar
5/25/2022 3:47 AM
The nema 17 stepper motor was a good match and works well. The cable may need to have some wires switched. Not all controllers have the same pin order. It was easy to change the order and works well.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

4-wire 2 phase bipolar Nema 17 stepper motor, 3.6V 1.68A, resolution of 1.8 degree/step, torque of 85 oz/inch.

Specifications

Electrical SpecificationModelATO60-1684A
Matched the Driver ModelATODSP42 (Click it to see more info)
Step Angle1.8°
Holding Torque6.0kg-cm (85oz.in)
Voltage3.6V
Rated Current/phase1.68A
Phase Resistance3Ω
Inductance6mH
Rotor Inertia68g-cm2
Physical SpecificationFrame Size42 x 42mm
Length60mm
Shaft DiameterΦ5mm
Shaft Length22mm
Motor Leads4
Weight0.48kg
Technical ParametersStep Angle Accuracy±5% (full step, no load)
Resistance Accuracy±10%
Inductance Accuracy±20%
Temperature Rise80℃ Max. (rated current, 2 phase on)
Ambient Temperature-10℃~+50℃
Insulation Resistance100MΩ Min. 500VDC
Dielectric Strength1Min. 500VAC·5mA
Shaft Radial Play0.06Max. 450g
Shaft Axial Play0.08Max. 450g
Quality AssuranceWarranty Period12 months
CertificateCE, ROHs, ISO/SGS9001

Nema 17 Stepper Motor Dimension (Unit=mm)

Nema 17 stepper motors dimension

L1=24mm, Lmax=60mm

Nema 17 Stepper Motor Wiring Diagram

Nema 17 stepper motors wiring diagram

Tips: What is holding torque and detent torque?

  1. Holding torque indicates the torque locking the rotor when the stepper motor is powered on but not rotating. It is one of most parameters for the stepper motor. The torque of the stepper motor at low velocity usually approaches the holding torque. As the output torque of stepper motor is gradually attenuated along with the increase in velocity while output power is also increased along with the increase in velocity. For examples, the rotor locks the rotor under the circumstance that the stepper motor is not powered on.
  2. Detent torque indicates the torque locking the rotor under the circumstance that the stepper motor is not powered on.
Product reviews
Works well
5
Shaun
Avatar
5/25/2022 3:47 AM
The nema 17 stepper motor was a good match and works well. The cable may need to have some wires switched. Not all controllers have the same pin order. It was easy to change the order and works well.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews