4" Pneumatic Angle Seat Valve, 2 Way, 2 Position

$635.89
Pneumatic angle seat valve adopts single acting pneumatic actuator with spring safety protection to operate, 4 inch thread port, 2 way 2 position. This angle seat piston valve can control air, water, oil, gas and steam, stainless steel body material, nominal pressure 1.6MPa, air pressure 0.4~0.8MPa.
SKU: ATO-ANGLE-100
*
*
Free Shipping
Delivery date: 6-12 days

DN100 pneumatic angle seat valve for sale at factory price. It is an inclined seat valve that works with stainless steel or plastic pneumatic actuator. Angle seat valve can be used for gas, liquid, steam and corrosive control. It has a radiator to protect the actuator, which prolongs the service life.

Specification

  • Model: ATO-KLJZF-DN100
  • Pipe Thread Type: 4 inch (DN100), ZG or G
  • Working Medium: Air, Water, Oil, Gas, Steam
  • Pneumatic Fitting Type: ZG 1/4"
  • Medium Temperature: -10℃~+180℃
  • Ambient Temperature: -10℃~+60℃
  • Nominal Pressure: 1.6MPa
  • Air Pressure: 0.4~0.8MPa
  • Valve Body Material: Stainless Steel (SS304, SS316)
  • Sealing Material: PTFE
  • Actuator Material (Optional): Stainless Steel or Plastic (Polyamide)

Angle Seat Valve with SS Actuator Dimension (Unit: mm)

Dimensions of angle seat valve with stainless steel actuator

ActuatorDRPGHLL1T
10011463ZG1/8"ZG4"35030023535


Angle Seat Valve with Plastic Actuator Dimension (Unit: mm)

Dimensions of angle seat valve with plastic actuator

ActuatorDABCφEFGH
125ZG4"2354203516897164395

Tips for using pneumatic angle seat valve

When using the angle seat valve flow direction of low in and high out (waterproof hammer):

  • When this flow direction is selected, the service life of the product can be increased.
  • When the working medium is liquid, choose this flow direction to prevent the impact of hammer.
  • The working pressure must be below 0.3MPa, otherwise a double-acting actuator angle seat valve must be selected.

When using flow direction high in and low out:

When the working medium of the pneumatic angle seat valve is steam or gas, the flow sealing performance of the product can be improved when the flow direction is selected. In addition, when the working medium is liquid, it is not waterproof against hammer shock.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Angle seat valve requirements
5
Ernasi
Avatar
7/1/2025 12:42 AM
We need stainless steel angle seat valves with 6-inch flanges for pipe connections.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, the maximum mounting flange for our stainless steel angle seat valves is only DN125, and we do not have 6-inch flanges.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

DN100 pneumatic angle seat valve for sale at factory price. It is an inclined seat valve that works with stainless steel or plastic pneumatic actuator. Angle seat valve can be used for gas, liquid, steam and corrosive control. It has a radiator to protect the actuator, which prolongs the service life.

Specification

  • Model: ATO-KLJZF-DN100
  • Pipe Thread Type: 4 inch (DN100), ZG or G
  • Working Medium: Air, Water, Oil, Gas, Steam
  • Pneumatic Fitting Type: ZG 1/4"
  • Medium Temperature: -10℃~+180℃
  • Ambient Temperature: -10℃~+60℃
  • Nominal Pressure: 1.6MPa
  • Air Pressure: 0.4~0.8MPa
  • Valve Body Material: Stainless Steel (SS304, SS316)
  • Sealing Material: PTFE
  • Actuator Material (Optional): Stainless Steel or Plastic (Polyamide)

Angle Seat Valve with SS Actuator Dimension (Unit: mm)

Dimensions of angle seat valve with stainless steel actuator

ActuatorDRPGHLL1T
10011463ZG1/8"ZG4"35030023535


Angle Seat Valve with Plastic Actuator Dimension (Unit: mm)

Dimensions of angle seat valve with plastic actuator

ActuatorDABCφEFGH
125ZG4"2354203516897164395

Tips for using pneumatic angle seat valve

When using the angle seat valve flow direction of low in and high out (waterproof hammer):

  • When this flow direction is selected, the service life of the product can be increased.
  • When the working medium is liquid, choose this flow direction to prevent the impact of hammer.
  • The working pressure must be below 0.3MPa, otherwise a double-acting actuator angle seat valve must be selected.

When using flow direction high in and low out:

When the working medium of the pneumatic angle seat valve is steam or gas, the flow sealing performance of the product can be improved when the flow direction is selected. In addition, when the working medium is liquid, it is not waterproof against hammer shock.

Product reviews
Angle seat valve requirements
5
Ernasi
Avatar
7/1/2025 12:42 AM
We need stainless steel angle seat valves with 6-inch flanges for pipe connections.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, the maximum mounting flange for our stainless steel angle seat valves is only DN125, and we do not have 6-inch flanges.
Only registered users can write reviews