3 hp (2.2kW) Concrete Vibrator Motor, 380V, 3 Phase, 2840rpm

$561.69
Factory price 2200 watt concrete vibrator motor for sale online. It works at 3 phase, 380 voltage, 2840 rpm rated speed system. Internal concrete vibrator is designed for fabrication railway, highway, bridges machine.
SKU: ATO-CVM-2.2kW
Free Shipping
Delivery date: 6-12 days

Concrete vibrator has cheap price and high quality, is powered by 2200 watt, three phase, and rated speed 2840rpm, applies widely to the bridge, harbor, large-scale dam construction and architectural engineering in construction industry.

2.2kW Internal Concrete Vibrator Motor

ModelATO-ZN-90
Power2.2kW
Phase3 phase
Voltage380V
Speed2840rpm
Number of Pole6 Pole
Size320 * 180 * 280mm
Weight15kg
TypeInternal
WarrantyOne year for machinery
ApplicationConstruction industry
Drive ModeElectric vibrator
CertificationCCC
Installation MethodMake sure the voltage and frequency supply match the ones indicated on the rating plate of the electric vibrator. Insert the power cable through the cable gland.

Detail of Internal Concrete Vibrator Motor   

                                   Internal concrete vibrator

6 Tips for Using Concrete Vibrator.

Concrete vibrator is a machine for mechanized pounding of concrete. So what should be noted when it is used to improve the quality of concrete components? ATO will give some tips about using concrete vibrator.

  1. The vibrating motor shall be installed on a solid foundation, and the anchor bolts shall be strong enough and tightened. Meanwhile, underground tunnel must be reserved in the middle of the foundation for regular adjustment and maintenance.
  2. Check and test run to check whether the machine parts are in good condition before using. All solid parts, especially bearing seat bolts, eccentric block bolts, motor and gearbox bolts, etc., must be fastened firmly.
  3. Vibration motor should not run for a long time without load. In the production operation, it is necessary to place a firm and reliable form-work locking fixture to ensure that the form-work and the concrete table vibrate together.
  4. Due to high speed and heavy load, the gears in the gearbox should be well lubricated and cooled; the oil level in the gearbox should be kept at the specified level, and the temperature rise should not exceed 70 ℃.
  5. The grounding of the motor should be reliable, and the power cord and line connector should be well insulated. There should be no damage and leakage.
  6. The surface of the vibrator should always kept clean and flat, so as to make good contact with the steel mold. Due to the vibration of the table under high frequency and heavy load, it is easy to produce cracks, so we must pay attention to the inspection and repair in time.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Good concrete vibration motor
5
Zebra
Avatar
8/9/2021 3:14 AM
Here is my situation. The 60w adjustable speed vibrator you make works for my application at 2800-2900 rpm, but it's very expensive. I would like to find a way to get a vibrator where I can set the rpm. We plan on needing 20 per day, but this is a new product and we are only comfortable getting quotes for 20 at a time at this point.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, you can adjust the speed of this motor to 2800-2900 rpm via its speed controller, and will it work at that speed continuously with no issue.
Great and powerful 3 hp concrete vibrator motor!
5
Mar
Avatar
6/29/2022 7:20 PM
This is a fine concrete vibrator motor that worked well. I attached this on my bed box springs using a solid-state motor speed controller for relaxing, adjustable vibrations while sleeping.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Concrete vibrator has cheap price and high quality, is powered by 2200 watt, three phase, and rated speed 2840rpm, applies widely to the bridge, harbor, large-scale dam construction and architectural engineering in construction industry.

2.2kW Internal Concrete Vibrator Motor

ModelATO-ZN-90
Power2.2kW
Phase3 phase
Voltage380V
Speed2840rpm
Number of Pole6 Pole
Size320 * 180 * 280mm
Weight15kg
TypeInternal
WarrantyOne year for machinery
ApplicationConstruction industry
Drive ModeElectric vibrator
CertificationCCC
Installation MethodMake sure the voltage and frequency supply match the ones indicated on the rating plate of the electric vibrator. Insert the power cable through the cable gland.

Detail of Internal Concrete Vibrator Motor   

                                   Internal concrete vibrator

6 Tips for Using Concrete Vibrator.

Concrete vibrator is a machine for mechanized pounding of concrete. So what should be noted when it is used to improve the quality of concrete components? ATO will give some tips about using concrete vibrator.

  1. The vibrating motor shall be installed on a solid foundation, and the anchor bolts shall be strong enough and tightened. Meanwhile, underground tunnel must be reserved in the middle of the foundation for regular adjustment and maintenance.
  2. Check and test run to check whether the machine parts are in good condition before using. All solid parts, especially bearing seat bolts, eccentric block bolts, motor and gearbox bolts, etc., must be fastened firmly.
  3. Vibration motor should not run for a long time without load. In the production operation, it is necessary to place a firm and reliable form-work locking fixture to ensure that the form-work and the concrete table vibrate together.
  4. Due to high speed and heavy load, the gears in the gearbox should be well lubricated and cooled; the oil level in the gearbox should be kept at the specified level, and the temperature rise should not exceed 70 ℃.
  5. The grounding of the motor should be reliable, and the power cord and line connector should be well insulated. There should be no damage and leakage.
  6. The surface of the vibrator should always kept clean and flat, so as to make good contact with the steel mold. Due to the vibration of the table under high frequency and heavy load, it is easy to produce cracks, so we must pay attention to the inspection and repair in time.

Product reviews
Good concrete vibration motor
5
Zebra
Avatar
8/9/2021 3:14 AM
Here is my situation. The 60w adjustable speed vibrator you make works for my application at 2800-2900 rpm, but it's very expensive. I would like to find a way to get a vibrator where I can set the rpm. We plan on needing 20 per day, but this is a new product and we are only comfortable getting quotes for 20 at a time at this point.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, you can adjust the speed of this motor to 2800-2900 rpm via its speed controller, and will it work at that speed continuously with no issue.
Great and powerful 3 hp concrete vibrator motor!
5
Mar
Avatar
6/29/2022 7:20 PM
This is a fine concrete vibrator motor that worked well. I attached this on my bed box springs using a solid-state motor speed controller for relaxing, adjustable vibrations while sleeping.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews