300 hp motor soft starter, 220 kW three phase 240v, 415v, 480v, 690v AC motor starter, manufacturer direct sale.
| Model | GS2-220 (220v, 240v), GS3-220 (380v, 400v, 415v), GS4-220 (460v, 480v), GS6-220 (575v, 690v). | ||
| Capacity | 300 hp (220 kw) | ||
| Current | 440 amps at 380v/480v, 900 amps at 220v, 270 amps at 690v | ||
| Weight | 21 kgs | ||
| Dimension | 525*257*194 mm | ||
| Input | Voltage | Three-phase 240v, 400v, 480v, 690v AC | |
| Frequency | 50Hz/ 60Hz | ||
| Adaptive Motor | Squirrel-cage three-phase asynchronous motor | ||
| Starting Times | It is recommended not to exceed 20 times per hour. | ||
| 485 Communication | DB9 interface, male plug, ① is RS485+, ⑥ is RS485- | ||
| Control Mode |
| ||
| Start Mode |
| ||
| Stop Mode |
| ||
| Protective Function |
| ||
| Ambient | Place to be used | Indoor location with good ventilation free from corrosive gas and conductive dust. | |
| Altitude | Below 1000M. It has to increase the soft starter rate power when the altitude is more than 1000M. | ||
| Temperature | -30 +55 oC | ||
| Humidity | 90%RH without dew condensation. | ||
| Vibration | <0.5G | ||
| Structure | Enclosure | IP 20 | |
| Cooling | Natural wind cooling. | ||
Details

Tips: Notice for soft starter
- The installation and maintenance of the soft starter shall be carried out by qualified professional.
- Do not use high-voltage test equipment (such as megger) to test the insulation of soft starter.
- If the motor is required to run reversibly, an inverting contactor can be installed on the incoming line side. Be careful not to install it on the output side of soft starter.
- The coil-type motor rotor can be winded with appropriate starter resistance to improve the starting torque, the soft starter can also be used to start the coil-type motor. When the motor reaches the top speed and keeps stable, starting resistance shall be bypassed to reduce power loss.
- It is strictly forbidden to place the power factor compensation capacitor on the output side of the soft starter and the capacitor cannot be switched during start-up.
Product reviews
Working height of 300hp soft starter
Billie
7/26/2021 11:50 PM
Will the GS4-220 work with a 250 HP 285 amp/ 480 volt well-pump at 1500 meters elevation?
Was this review helpful? (0/0)
Soft starter is not in remote or at the terminals
rabbie
4/7/2023 12:03 AM
We have a soft-starter that works in local or key-pad, but not in remote or at the terminals.
Was this review helpful? (0/0)
excellent 300 hp soft starter
Cassie
10/22/2025 7:36 PM
I've been using the 300 hp soft starter in our workshop for a few weeks now. It handles multiple voltages smoothly and the protective functions give me real peace of mind. The only small issue is the 20-starts-per-hour limit, which can be a bit restrictive during peak operations. still, it's a solid and dependable unit for the price.
Was this review helpful? (0/0)
This industrial motor soft starter is reliable
Max
10/27/2025 9:23 PM
We installed a 300HP unit on our water pump. Multiple voltage options made setup flexible, soft start eliminated water hammer, and RS485 lets us monitor easily.
Was this review helpful? (0/0)
Only registered users can write reviews