3 pole circuit breaker is available for installation in standard busbars. DC circuit breaker has overload long delay protection and short-circuit instantaneous protection functions.
Features
- Extremely high breaking capacity and current limiting characteristics.
- Available for installation in standard busbars.
- Dual function terminals on top and bottom sides (lifting type / open type).
- Optionally fixed to the bus bar on the top or bottom side.
- With isolation function, can be used as the main switch.
- Wiring terminal guidance to prevent mis-wiring.
Specifications
| Electrical Parameter | Model | ATO-FXBN1/BM1-300A |
| Current | 300A | |
| Rated Voltage | DC 750V | |
| Current Shell Frame | 400A | |
| Numbers of Pole | 3 pole | |
| Breaking Capacity | 25 KA | |
| Rated Insulation Voltage | 1000V | |
| Rated Impulse Withstand Voltage | 8 kV | |
| Total Break Time | 20 ms | |
| Installation Location | any location | |
| Allowable Ambient Temperature | -25 ℃ ~ 50 ℃ | |
| Protection Level | IP20 | |
| Flying Arc Distance | ≥50 mm | |
| Instantaneous Action Valve | 12 ln | |
| Installation Method | fixed, insertion type | |
| Standard | IEC60947-2x IEC60947-K GB14048.R GB14048.2 | |
| Machinery Parameter | Mounting Method | IEC standard track 35 mm |
| Enclosure Protection Level | IP20 | |
| Dual Function Terminals on Both Sides | open type / lifting type | |
| Terminal Protection | finger touch and hand touch safety | |
| Terminal Wiring Capacity | 1-25 mm² | |
| Termianal Screw Tightening Torque | 2-2.4 Nm | |
| Bus Bar Thickness | 0.8-2 mm | |
| Mounting Angle | functionaity is independent of location |
Dimension (Unit: mm)

Note: If you need copper busbar parts, please contact us.
Wiring Diagram

Details

Tips: The Importance of DC Circuit Breaker For Solar Photovoltaic Panel
DC circuit breaker is critical in solar photovoltaic panel system. Circuit for solar panel is a pricey component of the system. As a result, it is vital to safeguard them using a DC circuit breaker. You can connect the solar pv system panels' circuits to a combiner box. The DC circuit breaker also protects the circuits and boards.
Product reviews
Use in my kitchen
Matte
12/13/2022 7:40 PM
I bought to install a dedicated circuit for my welder, power tools since my only amp breakers are in the kitchen. This 300A DC circuit breaker works as it should, and I am happily running my welder without tripping breakers.
Was this review helpful? (0/0)
Only registered users can write reviews