3000 rpm or 6000 rpm can be chosen in this high speed brushless DC motor. Five-wire connection port can prohibit wrong connection of positive and negative poles.
Specification:
- Model Number: ATO-3525
- Shaft Length: 6.6 mm
- Shaft Diameter: 3 mm
- Size: 35 mm (D), 36 mm (L)
- Construction: Permanent Magnet
- Wiring: 5 lines
- Weight: 190g
- Motor Type: Micro Brushless DC Motor
- Rated Power: 2.5W
- Rated Voltage: 12V DC, 24V DC
- Rated Current: 0.28A, 0.35A, 0.4A
- Noload Speed: 3000 rpm, 6000 rpm
- Noload Current: 0.09A, 0.13A
- Rated Torque: 40 g.cm, 60 g.cm, 90 g.cm
- Efficiency: 80%
- Warranty: 12 Months
Dimension (mm):

Details

Tips: How to Maintain Brushless DC Motor?
- Before disassembly, the dust on the surface of the motor should be cleaned with compressed air, and the dirt on the surface should be wiped clean.
- Select the working place where the BLDC motor disintegrates and clean up the site environment.
- Familiar with motor structure characteristics and maintenance technical requirements.
- Prepare tools (including special tools) and equipment required for disintegration.
- In order to further understand the defects in motor operation, if possible, an inspection test can be done before disassembly. The motor with load test, check the temperature, sound, vibration and other parts of the motor in detail, and test voltage, current, speed, etc, and then disconnect the load, do a separate no-load inspection test, to measure no-load current and no-load loss, make a good record.
- Cut off the power supply, remove the external wiring of the motor and make a good record.
Product reviews
Light brushless DC motor
Farrah
7/13/2022 3:29 AM
This is a light brushless DC motor. After receiving the goods, I immediately took them out and used them. The BLDC motor is exactly the same as the pictures. I like this 3000 rpm brushless DC motor very much. It helps me a lot in my work.
Was this review helpful? (0/0)
Worked fine with no problems
Alston
10/25/2022 12:06 AM
Powerful 3000 rpm brushless DC motor for it's size. It has an 3 mm shaft and comes with a adapter and a set of spare brushes. This was used to repair an electric watch cleaning machine that was converted to 24V operation from mains. Worked fine with no problems.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Digital Rotary Torque Sensor, 0.1/5/300/1000 Nm to 10000 Nm
ATO-TQS-D03
$939.15
Digital rotary torque sensor with LCD display has the capacity range from 0.1 Nm/0.3 Nm/1 Nm/5 Nm/10 Nm/300 Nm/1000 Nm to 10000 Nm. LCD display can show torque, speed and power value at the same time. Dynamic torque sensor adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm. Rotary torque transducer with 7 pin waterproof circular connector and 3m cable can measure both forward and reverse torque, and then output ±5V/0-10V/4-20mA/RS485 torque signal to PLC.