30mm Worm Gearbox, Ratio 5:1 to 100:1

$417.12
Good price worm gearbox for sale online. Reduction ratio from 5:1/ 7.5:1/ 10:1 to 100:1, 30mm center distance, 1400 rpm input speed, IP65. ATO RV worm gearbox reducer is standard equipped with 60W/ 90W/ 120W/ 180W asynchronous motor, or it can be purchased with output shaft, flange, and torque arm.
SKU: ATO-WGR30
*
Free Shipping
Delivery date: 6-12 days

Buy an NMRV 30mm worm gearbox at a low price. Various reduction gear ratios are available: 15:1, 20:1, 25:1, 30:1, 40:1, 50:1, etc. Aluminum alloy housing, 20 Cr turbine, tin bronze worm, long life, and high efficiency.

Specification

ModelATO-NMRV030
Reduction ratio5:1/ 7.5:1/ 10:1/ 15:1/ 20:1/ 25:1/ 30:1/ 40:1/ 50:1/ 60:1/ 80:1/ 100:1 (optional)
Center distance30mm
Input speed1400 rpm
Protection gradeIP65
CertificationCE
ColorBlue
Warranty1 year
Material

Housing: Aluminum alloy

Turbine: 20 Cr

Worm: Tin bronze

Dimension (Unit: mm)

ATO 30mm worm gear reducer outline dimensional drawing

Details

Worm Gearbox Details

Customizable accessories

ATO worm gear reducer customizable accessories: Asynchronous motor, flange, output shaft

Mounting position

30mm worm gearbox mounting position

Tips: Why is the worm gearbox easy to wear?

Worm gearbox generally uses non-ferrous metal tin bronze as the worm wheel and harder steel as the worm, which can improve efficiency, but it is easy to wear during operation. Wear is caused by mechanical assembly, and it may also be caused by improper use of lubricants. ATO summed up the following experience for your reference:

  • Due to the particularity of the worm gearbox structure of the worm gearbox reducer, the rotation direction of the worm gear is at right angles to the rotation direction of the worm gear that transmits the power. When the two tooth surfaces are in meshing contact, they are almost completely caused by sliding contact. This kind of high sliding contact requires the contact surface to be highly matched. If the assembly is improperly or the accessories are not matched, it is easy to increase the friction of the contact surface, which will cause rapid wear.
  • Worm gearbox speed reducer is used to drive small helical gears. When installed vertically, it is easy to cause insufficient lubricating oil. When the worm gearbox reducer stops running, the transmission gear oil between the motor and the reducer is lost, and the gears cannot get the proper lubrication protection. When starting, the gears are not effectively lubricated, causing wear and even damage to the worm gearbox reducer.
  • The material of the worm gearbox and the bearing of the worm gearbox reducer is easy to wear.
  • When the worm gearbox is maintained and managed, the lubricant needs to be replaced if the lubricant is not selected properly.
Product reviews
This worm gearbox runs at correct speed.
5
Frank
Avatar
5/6/2022 1:57 AM
I used this gearbox to replace the 80:1 gearbox on a conveyor. It now runs at correct speed instead of running too fast. I appreciate the low price and it seems to run quietly and remain cool. The motor runs cooler than it did with the 80:1 gearbox.
Was this review helpful? Yes No (0/0)
The specification that we have is as below.
5
Alison
Avatar
3/6/2023 1:38 AM
Thanks for the reply, the specification that we have is as below. Please quote based on product standard type for other required spec and we will get a technical approval.

Electromotor Gearbox
Input: 2700 RPM
Output: 360 RPM
Power: 600 watt (0.6 Kw)
Frequency: 50 Hz
Was this review helpful? Yes No (0/0)
ATO Responded
You can choose Eectromotor Gearbox with a gear ratio of 7.5:1 on our website, which can meet your requirements. Please refer to the link: https://www.ato.com/600-w-dc-worm-gear-motor
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Buy an NMRV 30mm worm gearbox at a low price. Various reduction gear ratios are available: 15:1, 20:1, 25:1, 30:1, 40:1, 50:1, etc. Aluminum alloy housing, 20 Cr turbine, tin bronze worm, long life, and high efficiency.

Specification

ModelATO-NMRV030
Reduction ratio5:1/ 7.5:1/ 10:1/ 15:1/ 20:1/ 25:1/ 30:1/ 40:1/ 50:1/ 60:1/ 80:1/ 100:1 (optional)
Center distance30mm
Input speed1400 rpm
Protection gradeIP65
CertificationCE
ColorBlue
Warranty1 year
Material

Housing: Aluminum alloy

Turbine: 20 Cr

Worm: Tin bronze

Dimension (Unit: mm)

ATO 30mm worm gear reducer outline dimensional drawing

Details

Worm Gearbox Details

Customizable accessories

ATO worm gear reducer customizable accessories: Asynchronous motor, flange, output shaft

Mounting position

30mm worm gearbox mounting position

Tips: Why is the worm gearbox easy to wear?

Worm gearbox generally uses non-ferrous metal tin bronze as the worm wheel and harder steel as the worm, which can improve efficiency, but it is easy to wear during operation. Wear is caused by mechanical assembly, and it may also be caused by improper use of lubricants. ATO summed up the following experience for your reference:

  • Due to the particularity of the worm gearbox structure of the worm gearbox reducer, the rotation direction of the worm gear is at right angles to the rotation direction of the worm gear that transmits the power. When the two tooth surfaces are in meshing contact, they are almost completely caused by sliding contact. This kind of high sliding contact requires the contact surface to be highly matched. If the assembly is improperly or the accessories are not matched, it is easy to increase the friction of the contact surface, which will cause rapid wear.
  • Worm gearbox speed reducer is used to drive small helical gears. When installed vertically, it is easy to cause insufficient lubricating oil. When the worm gearbox reducer stops running, the transmission gear oil between the motor and the reducer is lost, and the gears cannot get the proper lubrication protection. When starting, the gears are not effectively lubricated, causing wear and even damage to the worm gearbox reducer.
  • The material of the worm gearbox and the bearing of the worm gearbox reducer is easy to wear.
  • When the worm gearbox is maintained and managed, the lubricant needs to be replaced if the lubricant is not selected properly.
Product reviews
This worm gearbox runs at correct speed.
5
Frank
Avatar
5/6/2022 1:57 AM
I used this gearbox to replace the 80:1 gearbox on a conveyor. It now runs at correct speed instead of running too fast. I appreciate the low price and it seems to run quietly and remain cool. The motor runs cooler than it did with the 80:1 gearbox.
Was this review helpful? Yes No (0/0)
The specification that we have is as below.
5
Alison
Avatar
3/6/2023 1:38 AM
Thanks for the reply, the specification that we have is as below. Please quote based on product standard type for other required spec and we will get a technical approval.

Electromotor Gearbox
Input: 2700 RPM
Output: 360 RPM
Power: 600 watt (0.6 Kw)
Frequency: 50 Hz
Was this review helpful? Yes No (0/0)
ATO Responded
You can choose Eectromotor Gearbox with a gear ratio of 7.5:1 on our website, which can meet your requirements. Please refer to the link: https://www.ato.com/600-w-dc-worm-gear-motor
Only registered users can write reviews