30 hp Horizontal Centrifugal Pump, Single Stage

$4,618.80
Cheap single stage centrifugal pump with motor power 30 hp, same diameter of inlet and outlet 65mm (2-1/ 2 inch). Horizontal centrifugal pump also has input voltage from AC 220V to 480V for selection, and optional input frequency 50Hz/ 60Hz. Centrifugal water pump can be used for cool water pressurization in air conditioner, refrigeration equipment, bathroom, etc.
SKU: ATO-HCP-022kW
*
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 6-12 days

3 phase centrifugal water pump with 31 m³/h maximum flow, 115m maximum head and 315mm nominal diameter of impeller, 0°, 90° and 180° installation angle of outlet.

Features:

  1. The centrifugal pump has the horizontal structure. The diameter of the inlet and outlet are the same. If a protective cover is added, it can be used in the open air.
  2. It is easy to install and maintain. No need to dismantle pipeline system, just lifting off the conjunction flat nut of vertical pump. Then all the rotor parts can be taken out.
  3. Horizontal centrifugal pump can be operating in series and parallel connection according to the requirements of flow and head.
  4. The installation angle of pump outlet can be 0°, 90° and 180° to meet different connection occasions.

Specification

  • Model: ATO-HCP-65-315A
  • Power: 30 hp (22 kW)
  • Number of stages: Single stage
  • Input voltage: AC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
  • Input frequency: 50Hz/ 60Hz
  • Inlet diameter: 65mm (2-1/ 2 inch)
  • Outlet diameter: 65mm (2-1/ 2 inch)
  • Flow (min. flow to max. flow): 16.6 m³/ h (73gpm), 23.7 m³/ h (104gpm), 31 m³/ h (136gpm)
  • Head (max. head to min. head): 115m (377ft), 113m (371ft), 110m (361ft)
  • Efficiency: 32%/ 40%/ 44%
  • Nominal diameter of impeller: 315mm
  • Size: 570*865*360mm
  • Weight: 255kg

Dimension (mm)

Boundary dimensionhHLaA
30057086512585
Base dimensionL1BIbh14-φd1
6203605702601004-φ18
Flange dimensionDD1n-φd
φ185φ1454-φ18

Horizontal centrifugal pump dimension

Tips: Main Reasons for the Mechanical Seal of Centrifugal Pump Leakage.

  1. The sealing end face between the moving ring and the stationary ring has the phenomena of too serious wearing, improper loading coefficient in design, thus causing the seal end face to have a crack, deformation, damage or the like.
  2. Several auxiliary seals have defects themselves or defects due to improper assembly, and the selected auxiliary seals are not suitable for working medium.
  3. The spring preload is insufficient or the spring has a fracture, corrosion, relaxation, coking or other problems, or suspended particles or crystals of the working medium accumulate in the spring gap after a long-period operation, causing spring fault and the compensation sealing ring is unable to float, so as to have leakage.
  4. Because the vertical deviation between the end face of the moving and static ring seal and the centre line of the shaft is too large, the sealing end face is not tightly bonded, thus causing leakage.
  5. Due to a large amount of axial yaw of the shaft, the fittings or the quality of the fittings associated with the seal are not good, it is easy to cause leakage.
Phase3 phase
Input voltageAC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
Input frequency50Hz, 60Hz
Installation angle of outlet0°, 90° and 180°
Pump typeBooster pump
Number of stagesSingle stage
Motor typeY/ Y2 series motor
Motor speed2900rpm
Impeller material304/ 316 stainless steel
Seal material304 stainless steel, tungsten carbide, fluorine rubber
Inlet max. pressure1MPa (145 psi)
(NPSH)r2.3m
UsageWater, or liquids compatible with pump component materials.
1. The volume of solid particles should be less than 0.1% in unit volume, and the granularity should be less than 0.2mm.
2. The temperature should be lower than 60℃.
EnvironmentTemperature: <40℃, humidity: <95%, altitude<1000m
Warranty12 months

Different types of centrifugal pumps

This video explains different types of centrifugal pumps that can be selected according to one's own needs.

Principles and functionality explained

This video tells us what a centrifugal pump is and its working principle, and you will have a general understanding of it.

Components of centrifugal pumps

This video is an explanation of the components of a centrifugal pump, and we can learn the basic knowledge of the eight components of a centrifugal pump from it.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

3 phase centrifugal water pump with 31 m³/h maximum flow, 115m maximum head and 315mm nominal diameter of impeller, 0°, 90° and 180° installation angle of outlet.

Features:

  1. The centrifugal pump has the horizontal structure. The diameter of the inlet and outlet are the same. If a protective cover is added, it can be used in the open air.
  2. It is easy to install and maintain. No need to dismantle pipeline system, just lifting off the conjunction flat nut of vertical pump. Then all the rotor parts can be taken out.
  3. Horizontal centrifugal pump can be operating in series and parallel connection according to the requirements of flow and head.
  4. The installation angle of pump outlet can be 0°, 90° and 180° to meet different connection occasions.

Specification

  • Model: ATO-HCP-65-315A
  • Power: 30 hp (22 kW)
  • Number of stages: Single stage
  • Input voltage: AC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
  • Input frequency: 50Hz/ 60Hz
  • Inlet diameter: 65mm (2-1/ 2 inch)
  • Outlet diameter: 65mm (2-1/ 2 inch)
  • Flow (min. flow to max. flow): 16.6 m³/ h (73gpm), 23.7 m³/ h (104gpm), 31 m³/ h (136gpm)
  • Head (max. head to min. head): 115m (377ft), 113m (371ft), 110m (361ft)
  • Efficiency: 32%/ 40%/ 44%
  • Nominal diameter of impeller: 315mm
  • Size: 570*865*360mm
  • Weight: 255kg

Dimension (mm)

Boundary dimensionhHLaA
30057086512585
Base dimensionL1BIbh14-φd1
6203605702601004-φ18
Flange dimensionDD1n-φd
φ185φ1454-φ18

Horizontal centrifugal pump dimension

Tips: Main Reasons for the Mechanical Seal of Centrifugal Pump Leakage.

  1. The sealing end face between the moving ring and the stationary ring has the phenomena of too serious wearing, improper loading coefficient in design, thus causing the seal end face to have a crack, deformation, damage or the like.
  2. Several auxiliary seals have defects themselves or defects due to improper assembly, and the selected auxiliary seals are not suitable for working medium.
  3. The spring preload is insufficient or the spring has a fracture, corrosion, relaxation, coking or other problems, or suspended particles or crystals of the working medium accumulate in the spring gap after a long-period operation, causing spring fault and the compensation sealing ring is unable to float, so as to have leakage.
  4. Because the vertical deviation between the end face of the moving and static ring seal and the centre line of the shaft is too large, the sealing end face is not tightly bonded, thus causing leakage.
  5. Due to a large amount of axial yaw of the shaft, the fittings or the quality of the fittings associated with the seal are not good, it is easy to cause leakage.
Only registered users can write reviews