3D Electronic Compass Sensor for Car/Boat

$273.77
Factory price 3D electronic compass sensor provides high-precision 3D direction measurement, with a tilt angle of ±85° and a resolution of 0.1°. Electronic compass sensor uses hard and soft magnetic calibration algorithms, and can choose RS232, RS485 and TTL interfaces, suitable for applications in antenna stabilization, vehicles, ships, system integration and many other fields.
SKU: ATO-CPS-DCM260B
*
*
Free Shipping
Delivery date: 6-12 days

Low-cost 3D electronic compass sensor, using hard and soft magnetic calibration algorithms, so that the compass can eliminate the influence of magnetic fields through calibration algorithms in environments with magnetic field interference. The electronic compass sensor integrates a three-axis magnetic sensing technology sensor, calculates the heading in real time through the central processor, and uses a three-axis accelerometer to compensate for the tilt angle in a wide range, ensuring that the compass can provide high-precision heading data at tilt angles up to ±85°.

Specification

ModelATO-DCM260B
Compass heading parametersHeading accuracy (RMS)0.8°
Resolution0.1°
Compass inclination parametersPitch accuracy (RMS)0.1°  <15° (measuring range)
0.2°  <30° (measuring range)
0.3°  <60° (measuring range)
Pitch tilt range±85°
Roll accuracy0.1°  <15° (measuring range)
0.2°  <30° (measuring range)
0.3°  <60° (measuring range)
Roll tilt range±85°
Resolution0.1°
Tilt compensation angle range<40°
CalibrationHard iron calibration✔
Soft iron calibration✔
Magnetic field interference calibration methodPlane rotates one circle (two-dimensional calibration)
Physical propertiesSizeL55×W37×H24mm
Connectors4-core 1m direct lead
Interface CharacteristicsStartup delay<50ms
Output signalRS232/RS485/TTL (optional)
Output rate20Hz/s
Output formatBinary high performance protocol
Power supplySupply voltage(Default) DC +5V
(Customized) DC 9~36V
Current (MAX)45mA
Ideal mode35mA
Sleep modeTBD
EnvironmentOperating range-40℃~+85℃
Storage temperature-40℃~+85℃
Vibration resistance2500g
Electromagnetic compatibilityAccording to EN61000 and GBT17626
MTBF≥40000 hours/time
Insulation resistance≥100 megohm
Vibration resistance10grms, 10~1000Hz
Weight≤135g


Wiring diagram

3 axis electronic compass sensor wiring

Dimension (mm)

3 axis electronic compass sensor dimension

Applications

Electronic compass sensor application

Installation direction diagram

3 axis electronic compass sensor installations

Tips: Installation instructions for 3-axis electronic compass sensor

Due to the use of geomagnetic principles in the azimuth of the DCM260B three-dimensional electronic compass sensor, it is necessary to select the installation location with the minimum magnetic interference environment. Please install this product away from iron, magnets, engines, and other magnetic objects. Even if there are these magnetic media around, it needs to be controlled at a distance of over 40cm (different magnetic fields have different distances of interference with the compass). To ensure the measurement accuracy of the product, stainless steel screws must be used during installation.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
Accurate positioning
5
Qilina
Avatar
1/14/2025 12:34 AM
Compared to traditional two-dimensional compasses, this 3D sensor can provide more comprehensive and accurate directional information. Whether searching for exits on busy urban streets or confirming direction during nighttime navigation, it can quickly and accurately provide guidance, maintaining high stability even in sharp turns or bumpy seas.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low-cost 3D electronic compass sensor, using hard and soft magnetic calibration algorithms, so that the compass can eliminate the influence of magnetic fields through calibration algorithms in environments with magnetic field interference. The electronic compass sensor integrates a three-axis magnetic sensing technology sensor, calculates the heading in real time through the central processor, and uses a three-axis accelerometer to compensate for the tilt angle in a wide range, ensuring that the compass can provide high-precision heading data at tilt angles up to ±85°.

Specification

ModelATO-DCM260B
Compass heading parametersHeading accuracy (RMS)0.8°
Resolution0.1°
Compass inclination parametersPitch accuracy (RMS)0.1°  <15° (measuring range)
0.2°  <30° (measuring range)
0.3°  <60° (measuring range)
Pitch tilt range±85°
Roll accuracy0.1°  <15° (measuring range)
0.2°  <30° (measuring range)
0.3°  <60° (measuring range)
Roll tilt range±85°
Resolution0.1°
Tilt compensation angle range<40°
CalibrationHard iron calibration✔
Soft iron calibration✔
Magnetic field interference calibration methodPlane rotates one circle (two-dimensional calibration)
Physical propertiesSizeL55×W37×H24mm
Connectors4-core 1m direct lead
Interface CharacteristicsStartup delay<50ms
Output signalRS232/RS485/TTL (optional)
Output rate20Hz/s
Output formatBinary high performance protocol
Power supplySupply voltage(Default) DC +5V
(Customized) DC 9~36V
Current (MAX)45mA
Ideal mode35mA
Sleep modeTBD
EnvironmentOperating range-40℃~+85℃
Storage temperature-40℃~+85℃
Vibration resistance2500g
Electromagnetic compatibilityAccording to EN61000 and GBT17626
MTBF≥40000 hours/time
Insulation resistance≥100 megohm
Vibration resistance10grms, 10~1000Hz
Weight≤135g


Wiring diagram

3 axis electronic compass sensor wiring

Dimension (mm)

3 axis electronic compass sensor dimension

Applications

Electronic compass sensor application

Installation direction diagram

3 axis electronic compass sensor installations

Tips: Installation instructions for 3-axis electronic compass sensor

Due to the use of geomagnetic principles in the azimuth of the DCM260B three-dimensional electronic compass sensor, it is necessary to select the installation location with the minimum magnetic interference environment. Please install this product away from iron, magnets, engines, and other magnetic objects. Even if there are these magnetic media around, it needs to be controlled at a distance of over 40cm (different magnetic fields have different distances of interference with the compass). To ensure the measurement accuracy of the product, stainless steel screws must be used during installation.

Product reviews
Accurate positioning
5
Qilina
Avatar
1/14/2025 12:34 AM
Compared to traditional two-dimensional compasses, this 3D sensor can provide more comprehensive and accurate directional information. Whether searching for exits on busy urban streets or confirming direction during nighttime navigation, it can quickly and accurately provide guidance, maintaining high stability even in sharp turns or bumpy seas.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews