Lower cost sinusoidal filter with rated current 25A, the power of 11kW. The sine filter can converse the PWM output signal (symmetrical voltage components) of motor.
Specification
| Model | ATO-SCAR-0025 |
| Rated current | 25A |
| Adapted power | 11kW |
| Withstand voltage | 3000 VAC 60/s |
| Fundamental frequency | 50Hz |
| Carrier frequency | 4kHz |
| Insulation class | F |
| Altitude | <2000m |
| Working temperature | -40-85℃ |
| Voltage drop | 8%-12% |
| Weight | 20kg |
Dimension

| Model | L | W | H | L1 | W1 | A | B |
| ATO-SCAR-0025 | 230mm | 240mm | 245mm | 210mm | 78mm | 8mm | 14mm |
Application

Tips: What is sine filter in VFD?
For Variable Frequency Drive (VFD) applications, MTE Sine Wave Filters eliminate the problem of motor/cable insulation failures, heating, and audible noise. Sine Wave Filters also reduce electromagnetic interference (EMI) by eliminating the high dV/dt associated with inverter output waveforms.
Product reviews
Stable and effective
Kaily
1/3/2026 6:45 PM
This 25A three-phase sine wave filter has been added to our 11kW drive system and has shown excellent performance from the start. After installation, the motor operates more smoothly with noticeably reduced noise and vibration, and the electrical stress on the equipment is clearly lower. The filter runs reliably at a 4kHz carrier frequency, and its high insulation withstand level provides extra confidence for continuous industrial operation, making it a stable and effective solution for improving power quality.
Was this review helpful? (0/0)
Only registered users can write reviews