Peristaltic pump with 24 volt power supply for sale. This kind of high pressure peristaltic pump has a service life of 600-1500 hours. Peristaltic pump uses wear-resistant lubricating rod material.
Features:
- The width of high pressure peristaltic pump only 40mm, compact structure.
- 3 rollers low pulse design, compatible with tubing of wall 1mm.
- 24V peristaltic pump has certain corrosion-resistant application scenarios.
- The peristaltic pump body base is designed with strip mounting holes, which can be directly fixed to your equipment.
Specification:
- Model: ATO-MN1A/ZL
- Rated Power: DC 12V, 24V
- Power: ≤3W
- Voltage RPM: 15 rpm, 150 rpm
- Tube Type: Silicone
- Flow Rate: 4.5 mL/min, 42 mL/min
- Net Weight: 100g
- Noise: ≤46 dB
- Outlet Pressure: ≤0.1 MPa
- Operating Environment: Temperature 0-60 ℃, relative humidity less than 85%
Dimension (Unit: mm)

Application:

Tips: Advanteges and Disadvantages of Precision Peristaltic Pump
Advantages:
- The only point of contact the pump has with the fluid or chemical is the interior of the tube.
- No valves or major seals to replace on a tube pump making them low maintenance.
- They are able to handle slurries, viscous chemicals, shear sensitive polymers and other abrasive fluids.
Disadvantages:
- The flexible hose or tube will tend to degrade with time and require periodic replacement.
- Replacing the hose can get expensive and timely do to the lubricant inside the casing (tube pumps are require less maintenance).
- With a hose pump at low flows the flow is pulsed. A hose pump is less suitable where a smooth consistent flow is required. An alternative type of positive displacement pump should be considered.
Product reviews
My favorite peristaltic pump
Jakko
8/5/2022 1:57 AM
This is my favorite peristaltic pump. 3 rollers low pulse design, compatible with tubing of wall 1 mm. I have used this high precision peristaltic pump in my experimental research and it works very well.
Was this review helpful? (0/0)
Highly recommend this pump
William
5/4/2026 7:20 PM
I got this little peristaltic pump for a lab-on-a-chip setup, and it's been perfect. The 24V version pushes 42 mL/min at 150 rpm, with very low pulse thanks to the 3‑roller design. It's compact enough to mount on a crowded breadboard, and the transparent housing makes it easy to spot any air bubbles. It's also very quiet, I can barely hear it over the ventilation. Highly recommend.
Was this review helpful? (0/0)
Hose model
Wince
7/22/2026 2:42 AM
I'm planning to order the ATO-PP-MN1ZL model, but I have a question about the "hose model". I don't understand what the options "ID3*δ1" and "ID4*δ1" represent. Could you explain them?
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
12V/ 24V Mini Peristaltic Pump, 130 mL/min Flow Rate
ATO-PP-MN2ZL
$98.08
Mini peristaltic pump with DC 12 volt or 24 volt power supply. Pump with 130 mL/min flow rate, 3 roller low pulse design of peristaltic pump, compatible with tube 14#, 16# and 25#. Option colors transparent cover enables visual checking mini peristaltic pump operation status.