22mm Momentary Push Button Switch, 220V

$16.86
Round momentary push button switch rated voltage 220 volt, 22mm hole size, 1 normally open 1 normally closed, gold plated copper pins, LED light display, the color of the light can be red, yellow, blue, green and white.
SKU: ATO-PBS-22mm
*
*
*
This product has a minimum quantity of 5
Free Shipping
Delivery date: 6-12 days

Normally closed momentary push button switch, LED lamp voltage 220V, 24V, 12V and 5V are optional, button color red yellow blue green and white are optional.

Specification:

ModleATO-PBS-22mm
Contact Combination1 NO + 1 NC
Hole Size22mm
Rated Capacity250V/3A
Action Stroke3.1mm
Contact Resistance≤50mΩ
Insulation Resistance≥1000MΩ
Protection LevelIP65
Shell MaterialNickel-Plated Copper
Lamp Bead ColorRed, yellow, blue, green, white
LED Lamp Voltage5VACDC, 12VACDC, 24VACDC, 220VACDC
Internal Moving ContactSilver Alloy
Key MaterialStainless Steel
Base MaterialNylon PA
Weight22.8g
Warranty12 Months

22mm Momentary Push Button Switch Dimension (unit: mm)
22mm momentary push button switch dimension

22mm momentary push button switch angular position
How to Maintain Momentary Push button Switch?

1. The button should be checked frequently to remove the dirt on it. Because the contact distance of the button is small, after years of use or bad seals, dust or oil emulsion of all levels into, will cause insulation reduction or even short circuit accidents. In this case, insulation and cleaning must be carried out and appropriate sealing measures taken.

2. When the button is used at high temperature, it is easy to make the plastic deformation and aging, leading to the loosening of the button and the short circuit between the wiring screws. According to the situation, a fastening ring can be added during installation to tighten the use, or insulated plastic pipe can be added to the wiring screw to prevent loosening.

3. The button that takes indicator light wants calorific as a result of bulb, when time is long easy make plastic chimney is out of shape cause change bulb difficulty. Therefore, it is not suitable to be used in the place with a long time of electricity; If you want to use, can appropriately reduce the bulb voltage, prolong its service life.

4. If poor contact is found, the cause should be found out: If there is damage on the contact surface, fine file can be used to repair; If there is dirt or soot on the contact surface, it is advisable to use a clean cotton cloth dipped in solvent to wipe clean; If the contact spring fails, it should be replaced; If the contact is badly burned, the product should be replaced.

In this video, we've walked you through the step-by-step procedure for wiring an AC contactor to establish the latching circuit and we also showed you how to achieve motor control with the established latching circuit.

VFD Two-Wire Control Wiring with Push Button for Reverse Motor Control

In this video, we walk you through the process of controlling the run, stop, and reverse rotation of a motor using a single self-latching push button and a VFD upgrade. All components in the video are provided by ATO.com. We have covered everything from wiring to parameter setup and test runs.

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
22mm momentary push button switch is available in a variety of colors
5
Compton
Avatar
11/15/2021 6:25 PM
This 220V22mm momentary push button switch is available in a variety of colors, and I like each color very much, so I bought them all. The merchant gave me a nice discount.
Was this review helpful? Yes No (0/0)
Pleased with this push button switch
5
Biaxy
Avatar
6/1/2022 7:36 PM
This 22mm momentary push button switch functions well as a bypass car engine starter. You can mount it anywhere in your vehicle, as long as there's space. I'm very pleased with this push button switch.
Was this review helpful? Yes No (0/0)
Super easy to install
5
Daye
Avatar
11/7/2022 7:48 PM
I installed these push button switches on my motorcycle to control various lights. They are super easy to install and leave a very small footprint. It works like a champ.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Normally closed momentary push button switch, LED lamp voltage 220V, 24V, 12V and 5V are optional, button color red yellow blue green and white are optional.

Specification:

ModleATO-PBS-22mm
Contact Combination1 NO + 1 NC
Hole Size22mm
Rated Capacity250V/3A
Action Stroke3.1mm
Contact Resistance≤50mΩ
Insulation Resistance≥1000MΩ
Protection LevelIP65
Shell MaterialNickel-Plated Copper
Lamp Bead ColorRed, yellow, blue, green, white
LED Lamp Voltage5VACDC, 12VACDC, 24VACDC, 220VACDC
Internal Moving ContactSilver Alloy
Key MaterialStainless Steel
Base MaterialNylon PA
Weight22.8g
Warranty12 Months

22mm Momentary Push Button Switch Dimension (unit: mm)
22mm momentary push button switch dimension

22mm momentary push button switch angular position
How to Maintain Momentary Push button Switch?

1. The button should be checked frequently to remove the dirt on it. Because the contact distance of the button is small, after years of use or bad seals, dust or oil emulsion of all levels into, will cause insulation reduction or even short circuit accidents. In this case, insulation and cleaning must be carried out and appropriate sealing measures taken.

2. When the button is used at high temperature, it is easy to make the plastic deformation and aging, leading to the loosening of the button and the short circuit between the wiring screws. According to the situation, a fastening ring can be added during installation to tighten the use, or insulated plastic pipe can be added to the wiring screw to prevent loosening.

3. The button that takes indicator light wants calorific as a result of bulb, when time is long easy make plastic chimney is out of shape cause change bulb difficulty. Therefore, it is not suitable to be used in the place with a long time of electricity; If you want to use, can appropriately reduce the bulb voltage, prolong its service life.

4. If poor contact is found, the cause should be found out: If there is damage on the contact surface, fine file can be used to repair; If there is dirt or soot on the contact surface, it is advisable to use a clean cotton cloth dipped in solvent to wipe clean; If the contact spring fails, it should be replaced; If the contact is badly burned, the product should be replaced.

Product reviews
22mm momentary push button switch is available in a variety of colors
5
Compton
Avatar
11/15/2021 6:25 PM
This 220V22mm momentary push button switch is available in a variety of colors, and I like each color very much, so I bought them all. The merchant gave me a nice discount.
Was this review helpful? Yes No (0/0)
Pleased with this push button switch
5
Biaxy
Avatar
6/1/2022 7:36 PM
This 22mm momentary push button switch functions well as a bypass car engine starter. You can mount it anywhere in your vehicle, as long as there's space. I'm very pleased with this push button switch.
Was this review helpful? Yes No (0/0)
Super easy to install
5
Daye
Avatar
11/7/2022 7:48 PM
I installed these push button switches on my motorcycle to control various lights. They are super easy to install and leave a very small footprint. It works like a champ.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews