20 amp 3 pole miniature circuit breaker (MCB) is used to electrical circuits from overloads and short circuits. This C20 mini circuit breaker with C curve trip characteristic allows for the protection of all 3 conductors in a 3 phase system, providing circuit protection.
3 Pole MCB Breaker Information
- Rated Current: 20 amp
- Rated Voltage: 230/400V AC, 50Hz
- Number of poles: 3 pole
- 6 kA rated short-circuit breaking capacity
- Compliant with IEC standard
- C curve trip characteristic
- With overload protection and short circuit protection function
Technical Data
| Model | ATO-NB8-633PC20 | |
| Rated Current | 20A | |
| Rated Voltage | 230/400V | |
| Frequency | 50Hz | |
| Number of Poles | 3P | |
| Mechanical Life | 20000 Times | |
| Electrical Life | 10000 Times | |
| Rated Short-Circuit Breaking Capacity | 6000A | |
| Operating Short-Circuit Breaking Capacity | 6000A | |
| Rated Impulse Withstand Voltage (1.2/50) | 6kV | |
| Dielectric Test Voltage | 2000V (50Hz, 1 min) | |
| Heat & Humidity Resistance | 28 Cycles | |
| Vibration Resistance | No Obvious Vibration and Impact | |
| Terminal Block | Terminal Block Type | Pillar Terminal Block |
| Min. Terminal Size Acceptability | 1mm2 | |
| Max. Terminal Size Acceptability | 25mm2 | |
| Standard Connection Torque | 2 N.m | |
| Max. Tolerable Torque | 2.5 N.m | |
| Wire Insertion Depth | 13mm | |
| Reference Temperature | 30℃ | |
| Operating Temperature | -35℃~+70℃ | |
| Storage Temperature | 35℃~+85℃ | |
| Applicable Altitude | 2000m | |
| Tripping Mode | Thermal Magnetic Trip | |
| Electromagnetic Tripping Type | Type C (5In-10In) | |
| Shell Flame Retardant Grade | V0 | |
| Wire Entry Method | Both Upper and Lower | |
| Installation Method | TH35-7.5 Standard Rail | |
| Protection Level | Direct Installation | IP20B |
| Installed in the Distribution Box | IP40B | |
3 Pole MCB Breaker Dimensions (Unit: mm)

Details

Tips: How to choose a miniature circuit breaker for the motor?
When selecting a miniature circuit breaker (MCB) for a motor, consider the following key factors:
- Current Rating: Choose a mini MCB breaker with a current rating that matches the motor's full-load current. It's important to select a micro circuit breaker that can handle the motor's startup current, which can be significantly higher than the running current.
- Motor Type and Inrush Current: Motors, especially induction motors, have a high inrush current during startup. Choose a mini MCB with a C curve (for moderate inrush currents) or D curve (for motors with high inrush currents) to avoid unnecessary tripping during startup.
- Breaking Capacity: Ensure the MCB's short-circuit breaking capacity is sufficient to handle potential fault currents without damage.
- Voltage Rating: Make sure the MCB’s voltage rating matches or exceeds the motor’s operating voltage (typically 230V for single-phase or 400V for three-phase motors).
- Overload Protection: The MCB circuit breaker should provide overload protection based on the motor's characteristics to prevent damage from prolonged excessive current.
Product reviews
Good circuit breaker and arrived on time.
Jules G.
11/5/2018 6:17 PM
Good circuit breaker and arrived on time. I installed it for heat pump as the old one was burnt. Works fine and no issues so far.
Was this review helpful? (0/0)
Great buy.
Lizard
5/30/2022 9:06 PM
I ordered this MCB as a DIN rail switch for solar panels. Very easy to install and works great. This is an easy and an inexpensive way to protect your equipment. Great buy.
Was this review helpful? (0/0)
Just what I needed.
Stefan
10/27/2022 1:11 AM
This MCB is just what I needed. Using this as a switch on the DC input side of my photovoltaic charge controller. The DIN rail in wide enough for me to install a surge and lightning protector next to it.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
32 amp 3 pole Miniature Circuit Breaker
ATO-MCB-3P32
$74.39
Favorable price 32 amp 3 pole miniature circuit breaker (MCB) for sale, with 6 kA rated short-circuit breaking capacity, standard rail mounting, easy to install. This mini circuit breaker comes with a C curve trip characteristic, which is designed to protect electrical circuits in industrial, commercial, and residential applications.