This variable DC power supply offers 0–24V adjustable output, 0–200A current capacity, and 4800W maximum output power for demanding DC power applications. Potentiometer-based adjustment enables straightforward output control, while clear digital metering and forced-air cooling support stable operation under high loads.
Specification
| Model | ATO-JK24200K |
| Input Voltage | Single-Phase AC 220V ±15% |
| Input Frequency | 50/60 Hz |
| Output Voltage | DC 0–24V |
| Output Current | 0–200A |
| Output Power | 4800 W |
| Power Supply Stability | ≤0.5% + 10 mV |
| Load Regulation | ≤0.5% + 30 mV |
| Ripple | ≤1% + 10 mV RMS |
| Voltage Display | 3½-digit digital meter; Accuracy: ±0.3% FS + 1 digit (10%–100% of rated value); Display range: 00.0–24.0V |
| Current Display | 3½-digit digital meter; Accuracy: ±0.3% FS + 1 digit (10%–100% of rated value); Display range: 00.0–200.0A |
| Insulation Resistance | Input-Output: ≥20 MΩ; Input-Case: ≥20 MΩ; Output-Case: ≥80 MΩ |
| Dielectric Strength | Input-Output: AC 1500V, 10mA, 1 minute; Input-Case: AC 1500V, 10mA, 1 minute; Output-Case: AC 1500V, 10mA, 1 minute |
| Overvoltage Protection | Built-in OVP; protection threshold: rated output voltage +5% |
| Overcurrent Protection | Constant-current output under overload and short-circuit conditions |
| Overtemperature Protection | Built-in OTP; protection threshold: 85°C ±5°C (heatsink temperature) |
| Voltage and Current Adjustment | Potentiometer |
| Output Polarity | Positive (+) and negative (-) outputs can be grounded independently |
| Cooling Method | Forced-Air Cooling |
| Operating Environment | Indoor use; Temperature: -10°C–40°C; Humidity: 10%–85% RH |
| Storage Environment | Temperature: -20–70°C; Humidity: 10%–90% RH |
| Dimensions | 430 × 255 × 155 mm (L × W × H) |
| Weight | 18kg |
Note: All values are typical and may vary under different load conditions or operating circumstances. Accuracy is measured under load-side voltage sensing conditions. Deviations from rated values may occur due to temperature variations and component aging.
Feature
- Stable Variable DC Power Supply: Low power supply stability and load regulation help maintain consistent DC output under changing load conditions, making the unit suitable for precision testing and industrial applications.
- Adjustable Voltage and Current Control: Independent potentiometers allow flexible adjustment of DC voltage and current for different load conditions and power testing requirements.
- Digital Voltage & Current Display: Independent 3½-digit digital meters provide real-time monitoring of output voltage and current, simplifying DC power supply testing and equipment operation.
- Multiple Protection Functions: Built-in overvoltage, overcurrent, short-circuit, and overtemperature protection helps safeguard the adjustable DC power supply and connected equipment during abnormal operating conditions.
- Forced-Air Cooling: Continuous fan cooling assists heat dissipation during demanding operation, supporting reliable performance for extended use in laboratory and industrial environments.
Detail
Front

Back

Size (unit: mm)

Tips: Can the Voltage and Current of This Variable DC Power Supply Be Adjusted Independently?
Yes. Separate potentiometers allow independent adjustment of DC voltage and current, giving you greater control over the output for different load conditions. This adjustable DC power supply is especially useful for equipment testing, circuit development, commissioning, and other applications where precise control of DC power is required.