20 Port Full Gigabit Managed Industrial Switch

$1,073.85
Best cost performance full Gigabit managed Ethernet switch, with 4 Gigabit SFP ports plus 16 Gigabit RJ45 ports, optional dual 24vdc 48vdc and single AC/DC power supply, Layer 2 managment and 35mm DIN-Rail mounted, redundant Ethernet technologies such as MW-Ring, EAPS/MSTP/STP increase the reliability of your system.
SKU: ATO-ES-SCOM7220G
*
Free Shipping
Delivery date: 6-12 days

20 ports full Gigabit Layer 2 managed switch for industrial applications, ideal for upgrading an existing network to Gigabit speed.

Specification

ModelATO-SCOM7220G
Software Performance
Redundancy ProtocolSupport MW-Ring and the recovery time<20 ms.
Support EAPS/MSTP/RSTP
Multicast RoutingSupport IGMP snooping/ IGMP v1/v2/v3
Support GMRP
Support static multicast
Unicast RoutingSupport RIPv1/v2/RIPng/OSPFv1/v2
Support Static Routing
Support PIM-SM/PIM-DM
Management and MaintenanceSupport CLI and Web management methods
Support SNMP v1/v2c
Support unified PC software management
Technical Specifications
Ethernet StandardIEEE802.3-10BaseT
IEEE802.3u-100BaseTX/100Base-FX
IEEE802.3x-Flow Control
IEEE802.3z-1000BaseLX
IEEE802.3ab-1000BaseTX
IEEE802.1ab
IEEE802.1D-Spanning Tree Protocol
IEEE802.1w-Rapid Spanning Tree Protoco
IEEE802.1Q -VLAN Tagging
IEEE802.1p -Class of Service
IEEE802.1X-Port Based Network Access Control
Switch Properties
Priority Queue4
VLAN ID1-4096
IGMP Groups512
MAC Table16k
Switch Bandwidth40Gbps
Switch Delay<5μs
Interface
Gigabit PortsPort numbers: 20
Connector: SFP for fiber port (LC, single or multi-mode), RJ45 for copper port
Baud rate: 1000Base-LX (fiber port), 10/100/1000M for copper port
Console PortRS232/RJ45
Terminal Block for
Power Input
5.08mm terminal block
Terminal Block for Relay Alarm5.08mm terminal block, 1A@24VDC
Communication Distance
Twisted-pair100m (CAT5/CAT5e cable)
Multi-mode FiberGigabit multi-mode: 850nm 550m
Single-mode FiberGigabit single mode: 1310nm 20km
LED Indicator Lights
Front Panel LEDPort light: LINK/ACT, SPEED
Running light: RUN
Power LED: PWR1/PWR2
Ring LED: Alarm
Power Requirements
Power InputDC18-72VDC (Dual redundant input)
Single DC110-220V (DC110~370V) or AC100-240V (AC85~264V)
Full-load Consumption<15W
Overload Protectionsupport
Inversed Protectionsupport
Redundancy Protectionsupport
Working Environment
Operating Temperature-40°C~85°C
Storage Temperature-40°C~85°C
Ambient Humidity5%~95% (non-condensing)
Physical Characteristics
ShellIP40 protection, aluminum alloy shell
Installation35mm din rail mounted installation
Dimension156mm x 128mm x 72mm
Weight650g
Industry Standard
EMCEN61000-4-2(ESD), Level 4
EN61000-4-3(RS), Level 4
EN61000-4-4(EFT), Level 4
EN61000-4-5(Surge), Level 4
EN61000-4-6(CS), Level 4
EN61000-4-8, Level 5
ImpactIEC60068–2-27
FallingIEC60068-2-32
ShockIEC60068-2-6

Dimensional Drawing (mm)

20 port full gigabit managed industrial switch dimension

Tips: What is industrial Ethernet switch ring network redundancy?
Ring network is to use a continuous loop connecting each device together. It ensures that the signals sent on one device can be seen by all other devices on the ring. Ring network redundancy refers to whether the switch supports: When the cable connection is interrupted, the IE switch receives this information and activates its backup port to restore network communication. At the same time, the industrial Ethernet switches disconnected from ports 7 and 8 in the network, the relays are closed, and the indicators give an error alarm to the user. After the cable repair is normal, the relay and indicator light return to the normal state.

Product reviews
Managed switch vs unmanaged switch
5
Michel
Avatar
4/10/2022 7:18 PM
I have two quesitons about this managed switch. Is power input DC110-220V (DC110~370V) or AC100-240V (AC85~264V) (should be on the label)? What is the difference between the smart switch and the unmanaged switch?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, it just as the label. And unmanaged switches are plug and play - connect one of the ports to your existing LAN via Ethernet to receive additional physical Ethernet port connectivity via the switch. The Easy Smart variation offers some basic management features such as QoS for a Lag-Free Experience, IGMP Snooping for Multicast Optimization, and VLAN for Security.
good industrial switch
4
Dylan0
Avatar
10/19/2025 7:55 PM
I've been using this 20 port full gigabit managed industrial switch in our plant for a few weeks and it handles the harsh environment perfectly. The redundant power and wide temperature range make it super reliable for continuous operation. Setting up the advanced features took me a little time to figure out, but it's minor compared to its performance.
Was this review helpful? Yes No (0/0)
It works really well
5
Logan
Avatar
11/10/2025 7:56 PM
I’ve been using it for a few weeks, and it works really well. The network speed is consistent, setup was straightforward, and the metal housing feels sturdy. It’s been stable even in our workshop environment.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

20 ports full Gigabit Layer 2 managed switch for industrial applications, ideal for upgrading an existing network to Gigabit speed.

Specification

ModelATO-SCOM7220G
Software Performance
Redundancy ProtocolSupport MW-Ring and the recovery time<20 ms.
Support EAPS/MSTP/RSTP
Multicast RoutingSupport IGMP snooping/ IGMP v1/v2/v3
Support GMRP
Support static multicast
Unicast RoutingSupport RIPv1/v2/RIPng/OSPFv1/v2
Support Static Routing
Support PIM-SM/PIM-DM
Management and MaintenanceSupport CLI and Web management methods
Support SNMP v1/v2c
Support unified PC software management
Technical Specifications
Ethernet StandardIEEE802.3-10BaseT
IEEE802.3u-100BaseTX/100Base-FX
IEEE802.3x-Flow Control
IEEE802.3z-1000BaseLX
IEEE802.3ab-1000BaseTX
IEEE802.1ab
IEEE802.1D-Spanning Tree Protocol
IEEE802.1w-Rapid Spanning Tree Protoco
IEEE802.1Q -VLAN Tagging
IEEE802.1p -Class of Service
IEEE802.1X-Port Based Network Access Control
Switch Properties
Priority Queue4
VLAN ID1-4096
IGMP Groups512
MAC Table16k
Switch Bandwidth40Gbps
Switch Delay<5μs
Interface
Gigabit PortsPort numbers: 20
Connector: SFP for fiber port (LC, single or multi-mode), RJ45 for copper port
Baud rate: 1000Base-LX (fiber port), 10/100/1000M for copper port
Console PortRS232/RJ45
Terminal Block for
Power Input
5.08mm terminal block
Terminal Block for Relay Alarm5.08mm terminal block, 1A@24VDC
Communication Distance
Twisted-pair100m (CAT5/CAT5e cable)
Multi-mode FiberGigabit multi-mode: 850nm 550m
Single-mode FiberGigabit single mode: 1310nm 20km
LED Indicator Lights
Front Panel LEDPort light: LINK/ACT, SPEED
Running light: RUN
Power LED: PWR1/PWR2
Ring LED: Alarm
Power Requirements
Power InputDC18-72VDC (Dual redundant input)
Single DC110-220V (DC110~370V) or AC100-240V (AC85~264V)
Full-load Consumption<15W
Overload Protectionsupport
Inversed Protectionsupport
Redundancy Protectionsupport
Working Environment
Operating Temperature-40°C~85°C
Storage Temperature-40°C~85°C
Ambient Humidity5%~95% (non-condensing)
Physical Characteristics
ShellIP40 protection, aluminum alloy shell
Installation35mm din rail mounted installation
Dimension156mm x 128mm x 72mm
Weight650g
Industry Standard
EMCEN61000-4-2(ESD), Level 4
EN61000-4-3(RS), Level 4
EN61000-4-4(EFT), Level 4
EN61000-4-5(Surge), Level 4
EN61000-4-6(CS), Level 4
EN61000-4-8, Level 5
ImpactIEC60068–2-27
FallingIEC60068-2-32
ShockIEC60068-2-6

Dimensional Drawing (mm)

20 port full gigabit managed industrial switch dimension

Tips: What is industrial Ethernet switch ring network redundancy?
Ring network is to use a continuous loop connecting each device together. It ensures that the signals sent on one device can be seen by all other devices on the ring. Ring network redundancy refers to whether the switch supports: When the cable connection is interrupted, the IE switch receives this information and activates its backup port to restore network communication. At the same time, the industrial Ethernet switches disconnected from ports 7 and 8 in the network, the relays are closed, and the indicators give an error alarm to the user. After the cable repair is normal, the relay and indicator light return to the normal state.

Product reviews
Managed switch vs unmanaged switch
5
Michel
Avatar
4/10/2022 7:18 PM
I have two quesitons about this managed switch. Is power input DC110-220V (DC110~370V) or AC100-240V (AC85~264V) (should be on the label)? What is the difference between the smart switch and the unmanaged switch?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, it just as the label. And unmanaged switches are plug and play - connect one of the ports to your existing LAN via Ethernet to receive additional physical Ethernet port connectivity via the switch. The Easy Smart variation offers some basic management features such as QoS for a Lag-Free Experience, IGMP Snooping for Multicast Optimization, and VLAN for Security.
good industrial switch
4
Dylan0
Avatar
10/19/2025 7:55 PM
I've been using this 20 port full gigabit managed industrial switch in our plant for a few weeks and it handles the harsh environment perfectly. The redundant power and wide temperature range make it super reliable for continuous operation. Setting up the advanced features took me a little time to figure out, but it's minor compared to its performance.
Was this review helpful? Yes No (0/0)
It works really well
5
Logan
Avatar
11/10/2025 7:56 PM
I’ve been using it for a few weeks, and it works really well. The network speed is consistent, setup was straightforward, and the metal housing feels sturdy. It’s been stable even in our workshop environment.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews