2 inch Stainless Steel Sanitary Butterfly Valve

$99.29
Hand operated SS sanitary butterfly valve is a hygienic valve with purity requirements for food and chemical industries. This 2 inch manual butterfly valve is made from 304 stainless steel and comes with welded end or quick connect end, which is simple structure and high performance for flow control, throttling and steam service.
SKU: ATO-BV-2I
*
Free Shipping
Delivery date: 6-12 days

In the food grade industry, the 2 inch sanitary butterfly valve is a common hygienic valve that has better flow control characteristics. This high performance butterfly valve with welded or quick connect end is constructed from 304 stainless steel and EPDM or PTFE seat, which can be operated by actuator or handle.

Specification

ModelATO-BV-2I
TypeSS Sanitary Butterfly Valve
Size2 inch
Connection Method (Optional)Welded End/ Quick Connect End
Drive MethodManual
Body Material304 Stainless Steel (Default) / 316 Stainless Steel
Washer and GasketEPDM Comforms to PFA 177.2600
HandleAISI 304/ PP
Surface FinishingRa≤0.8
Operating Torque3Nm
Operating Temperature-10℃~+120℃
Max. Pressure1MPa
Min. Pressure0.02MPa p.abs
Weight2 kg
CertificatePED97-23EC, FDA.177.2600

Dimensions (Unit: mm)

Dimensions of Welded End and Quick Connect End Stainless Steel Sanitary Butterfly Valve

SizeDnDD1JHH1A1A2
2 inch47.850.86413352.547.55276

Tips for installing sanitary butterfly valve

  • It is best to install SS sanitary butterfly valves upright and vertically on the pipeline. A support frame should be added to the valve where the weight is large and there is vibration.
  • The body of the stainless steel sanitary butterfly valve should avoid excessive stress due to severely different shafts between the front and rear piping or the adjusted flange.
  • Flush the piping system before installing the regulating valve before the initial start of construction and after the maintenance is stopped. Or install a transition filter in front of the valve.
  • The sanitary BF valve must be installed in accordance with the arrow on the flow direction of the valve body in an environment where there is no severe corrosive gas.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
High quality and super low price
5
Carl
Avatar
4/20/2022 9:04 PM
Excellent sanitary butterfly valve of high quality and super low price. The polishing is well done,  the operation is smooth. If I need more, I would order this item again.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

In the food grade industry, the 2 inch sanitary butterfly valve is a common hygienic valve that has better flow control characteristics. This high performance butterfly valve with welded or quick connect end is constructed from 304 stainless steel and EPDM or PTFE seat, which can be operated by actuator or handle.

Specification

ModelATO-BV-2I
TypeSS Sanitary Butterfly Valve
Size2 inch
Connection Method (Optional)Welded End/ Quick Connect End
Drive MethodManual
Body Material304 Stainless Steel (Default) / 316 Stainless Steel
Washer and GasketEPDM Comforms to PFA 177.2600
HandleAISI 304/ PP
Surface FinishingRa≤0.8
Operating Torque3Nm
Operating Temperature-10℃~+120℃
Max. Pressure1MPa
Min. Pressure0.02MPa p.abs
Weight2 kg
CertificatePED97-23EC, FDA.177.2600

Dimensions (Unit: mm)

Dimensions of Welded End and Quick Connect End Stainless Steel Sanitary Butterfly Valve

SizeDnDD1JHH1A1A2
2 inch47.850.86413352.547.55276

Tips for installing sanitary butterfly valve

  • It is best to install SS sanitary butterfly valves upright and vertically on the pipeline. A support frame should be added to the valve where the weight is large and there is vibration.
  • The body of the stainless steel sanitary butterfly valve should avoid excessive stress due to severely different shafts between the front and rear piping or the adjusted flange.
  • Flush the piping system before installing the regulating valve before the initial start of construction and after the maintenance is stopped. Or install a transition filter in front of the valve.
  • The sanitary BF valve must be installed in accordance with the arrow on the flow direction of the valve body in an environment where there is no severe corrosive gas.
Product reviews
High quality and super low price
5
Carl
Avatar
4/20/2022 9:04 PM
Excellent sanitary butterfly valve of high quality and super low price. The polishing is well done,  the operation is smooth. If I need more, I would order this item again.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews