2" Brass Ball Valve, 2 Piece

$94.89
Factory price 2 inch brass ball valve with handle for sale. Valve body is made of high quality brass forging to prevent leakage, which used for water and flow control. 2 piece, DN50, 1.6MPa, thread connection. This brass ball valve can not be used for drinking water.
SKU: ATO-BBV-DN50
Free Shipping
Delivery date: 6-12 days

Note:

  • Unsalable status.
  • This brass ball valve can not be used for drinking water.

The valve body is made from high-quality brass forging to prevent leakage. Brass ball valve is manufactured by a high-precision special machine with low flow resistance. The medium inside the valve body has a straight channel, and the medium flows in a straight line.

Specification

  • Model: ATO-BBV-DN50
  • Size: 2 inch (DN50)
  • Nominal Pressure: 1.6MPa
  • Body Material: Brass
  • Connection Type: Thread
  • Standard: Compliant with ISO 228 Standard
  • Applicable Temperature: -10℃≤T≤120℃
  • Working Medium: Water, Oil, Non-Corrosive and Non-Combustible Gas
  • Weight: 1400g

Dimensions & Details (Unit: mm)

Dimensions of brass ball valve

DNSizeLBHD
50294.54489140
Number123456789
ComponentValve BodyValve CapValve SeatValve BallValve StemFillerIron HandlePressure CapLocknut
MaterialBrassBrassPTFEIronBrassPTFEIronBrassStainless Steel

Tips: What is a fixed ball valve?

The fixed ball valve has two body structures: two-piece and three-piece. The middle flange is connected by bolts. The seal is made of reinforced PTFE and embedded in the stainless steel ring. The rear of the steel ring is provided with a spring to ensure that the valve seat is close to the ball. Keep sealed. The upper and lower valve stems are equipped with PTFE bearings to reduce friction and save labor. There is an adjustment plate at the bottom of the small shaft to ensure the joint position of the ball and the sealing ring. Full bore: The valve flow aperture is consistent with the inner diameter of the pipeline, so that the pipeline can be cleaned.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Note:

  • Unsalable status.
  • This brass ball valve can not be used for drinking water.

The valve body is made from high-quality brass forging to prevent leakage. Brass ball valve is manufactured by a high-precision special machine with low flow resistance. The medium inside the valve body has a straight channel, and the medium flows in a straight line.

Specification

  • Model: ATO-BBV-DN50
  • Size: 2 inch (DN50)
  • Nominal Pressure: 1.6MPa
  • Body Material: Brass
  • Connection Type: Thread
  • Standard: Compliant with ISO 228 Standard
  • Applicable Temperature: -10℃≤T≤120℃
  • Working Medium: Water, Oil, Non-Corrosive and Non-Combustible Gas
  • Weight: 1400g

Dimensions & Details (Unit: mm)

Dimensions of brass ball valve

DNSizeLBHD
50294.54489140
Number123456789
ComponentValve BodyValve CapValve SeatValve BallValve StemFillerIron HandlePressure CapLocknut
MaterialBrassBrassPTFEIronBrassPTFEIronBrassStainless Steel

Tips: What is a fixed ball valve?

The fixed ball valve has two body structures: two-piece and three-piece. The middle flange is connected by bolts. The seal is made of reinforced PTFE and embedded in the stainless steel ring. The rear of the steel ring is provided with a spring to ensure that the valve seat is close to the ball. Keep sealed. The upper and lower valve stems are equipped with PTFE bearings to reduce friction and save labor. There is an adjustment plate at the bottom of the small shaft to ensure the joint position of the ball and the sealing ring. Full bore: The valve flow aperture is consistent with the inner diameter of the pipeline, so that the pipeline can be cleaned.

Only registered users can write reviews