2 hp (1.5 kW) Screw Pump, 380V

$2,586.91
2 hp single screw pump with affordable price for sale online. Coupling prevent the connected parts of electric screw pump from being subjected to excessive load and play a role in overload protection. Screw pump often used in chemical industry, energy industry and shipbuilding industry.
SKU: ATO-SP-2HP
Free Shipping
Delivery date: 10-12 days

The flow rate of this screw water pumpt is 0.8 m3/h. Screw pump suitable for conveying high viscosity medium work. The suction flange diameter of 2 hp (1.5 kW) single crew pump is 25 mm.

Features:

  • Small mechanical vibration, no pulsation, stable operation.
  • Besides can transport all kinds of fluid medium, can also transport high viscous medium.
  • Flow is proportional to speed, with the help of the governor can realize the amount of automatic regulation.

Specification:

  • Model: ATO-G20-2
  • Voltage: 380V
  • Power: 2 hp (1.5 kW)
  • Flow Rate: 0.8 m3/h
  • Pressure: 1.2 MPa
  • Max Speed: 960 r/min
  • NPSH: 4m
  • Suction Flange Diameter: 25 mm
  • Discharge Flange Diameter: 25 mm
  • Max Granule Size: 1.5 mm
  • Max Fibre Size: 25 mm

Structure:

Screw pump structure

1. outlet2. pull bar3. stator4. screw shaft
5. gimbal6. inlet7. connect shaft8. stuff seat
9. stuff gland10. bearing house11. bearing12. gearing shaft
13. bearing cover14. coupling15. base plate16. motor

Tips: How to Maintain Screw Pump?

  • Regularly inspect the pump. Check the pump for any signs of wear and tear, including leaks, cracks, or damage to the rotor or stator. Make sure all fasteners are tightened properly.
  • Clean the pump. Clean the pump regularly to remove any buildup of debris or contaminants that can affect its performance. Use a cleaning solution that is compatible with the material being pumped.
  • Check the lubrication. The pump must be adequately lubricated to prevent damage to the rotor and stator. Check the lubrication regularly, and replace it as needed.
  • Monitor the temperature. Check the temperature of the pump regularly, as overheating can damage the seals and reduce the lifespan of the pump.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
High capacity and efficient pumping
5
Elijah
Avatar
9/22/2023 2:48 AM
Screw pumps are designed with few moving parts, reducing the likelihood of breakdowns. This pump's 2 HP motor ensures it can handle a substantial volume of fluid.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The flow rate of this screw water pumpt is 0.8 m3/h. Screw pump suitable for conveying high viscosity medium work. The suction flange diameter of 2 hp (1.5 kW) single crew pump is 25 mm.

Features:

  • Small mechanical vibration, no pulsation, stable operation.
  • Besides can transport all kinds of fluid medium, can also transport high viscous medium.
  • Flow is proportional to speed, with the help of the governor can realize the amount of automatic regulation.

Specification:

  • Model: ATO-G20-2
  • Voltage: 380V
  • Power: 2 hp (1.5 kW)
  • Flow Rate: 0.8 m3/h
  • Pressure: 1.2 MPa
  • Max Speed: 960 r/min
  • NPSH: 4m
  • Suction Flange Diameter: 25 mm
  • Discharge Flange Diameter: 25 mm
  • Max Granule Size: 1.5 mm
  • Max Fibre Size: 25 mm

Structure:

Screw pump structure

1. outlet2. pull bar3. stator4. screw shaft
5. gimbal6. inlet7. connect shaft8. stuff seat
9. stuff gland10. bearing house11. bearing12. gearing shaft
13. bearing cover14. coupling15. base plate16. motor

Tips: How to Maintain Screw Pump?

  • Regularly inspect the pump. Check the pump for any signs of wear and tear, including leaks, cracks, or damage to the rotor or stator. Make sure all fasteners are tightened properly.
  • Clean the pump. Clean the pump regularly to remove any buildup of debris or contaminants that can affect its performance. Use a cleaning solution that is compatible with the material being pumped.
  • Check the lubrication. The pump must be adequately lubricated to prevent damage to the rotor and stator. Check the lubrication regularly, and replace it as needed.
  • Monitor the temperature. Check the temperature of the pump regularly, as overheating can damage the seals and reduce the lifespan of the pump.
Product reviews
High capacity and efficient pumping
5
Elijah
Avatar
9/22/2023 2:48 AM
Screw pumps are designed with few moving parts, reducing the likelihood of breakdowns. This pump's 2 HP motor ensures it can handle a substantial volume of fluid.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews