2-1/2" Pneumatic Knife Gate Valve

$974.19
The pneumatic knife gate valve is a gate valve used to quickly cut off or open a pipeline. The knife gate valve has a 2-1/2" (65mm) bore size and is made of stainless steel. The 2-1/2" pneumatic knife gate valve is suitable for use in the piping of sugar pulp, paper pulp, sewage, coal slurry, ash, dust, sludge, and water mixtures.
SKU: ATO-FC-PKGV-65
*
*
*
*
*
Free Shipping
Delivery date: 6-12 days

Note: This knife gate valve cannot be used for drinking water.

Pneumatic knife gate valve with strong cut-off force, self-cleaning function, 2-1/2" bore size, pressure range 1MPa-1.6MPa. The knife gate valve is light and flexible in operation, small in size, has smooth passage, low flow resistance, easy to install.

Note:

  • Double Acting: Ventilation On, Ventilation Off; Maintain current position in case of air source failure.
  • Single Acting AC, Air-Open: Ventilation On, Air Disconnected; Close on air source failure.
  • Single Acting AC, Air-Close: Ventilation Off, Air Disconnected; Open on air source failure.

Specification

  • Model: ATO-FC-PKGV-65
  • Drive mode: Pneumatic
  • Nominal Diameter: 2-1/2 Inch (DN65)
  • The direction of Flow: Unidirectional default (Please contact us for bidirectional)
  • Seal Material:  Stainless steel 304 (Other materials please contact us)
  • Body Material (Optional): Cast steel or stainless steel
  • Number of Gates: Single gates
  • Connection Mode: Flange/lug/wafer
  • Working Pressure: 1.0MPa (PN10)
  • Air Source: 2.5bar-8bar
  • Medium: Slurry, material, viscous fluid
  • Working Temperature: -30-300°C
  • Medium Temperature: -20-150°C
  • Mode of Action: Double acting, single acting normally closed, single acting normally open

Features

  • The 2-1/2 inch pneumatic knife gate valve adopts a one-piece structure, ultra-thin design, full-diameter flow, and is not prone to leakage, with convenient disassembly and assembly.
  • The stainless steel knife gate valve has good sealing performance, strong wear resistance, automatic compensation, and long service life.
  • The fixed guide claw design, replacement groove structure, and is not easy to accumulate and prevents jamming.
  • The double-bearing design has low torque, frequent opening and closing, no vibration, and no noise.
  • The pneumatic knife gate valve has strong cutting force and self-cleaning function, and is suitable for fiber particle fluid.

Dimension (Unit mm)

Pneumatic knife gate valve dimension

DNDD1D2bLz-dn-m
65180mm145mm120mm18mm50mm2-182-M16

Details

Pneumatic Knife Gate Valve Details
Applications

Knife gate valves are generally used for the circulation of media such as paper pulp, coal ash, chemical materials, sewage, and foodstuffs. ATO knife gate valve has the remarkable advantages of light switch, good sealing, good elastic memory, and long service life. It can be widely used in water, sewage, construction, petroleum, chemical, food, medicine, light textile, electric power, ship metallurgy, energy system and another body pipeline as a regulating and intercepting device.Knife gate valve application

Tips: How does a pneumatic gate valve work?

A pneumatic gate valve is a type of valve that uses compressed air to control the flow of fluid. The valve consists of a gate, which is mounted on a stem, and a body that houses the mechanism for controlling the flow of fluid. The gate is designed to move vertically up and down, opening or closing the valve.

When compressed air is supplied to the valve, it acts on a piston inside the body, causing it to move and open or close the gate. The movement of the gate is controlled by the air pressure, which can be adjusted to control the flow of fluid. When the air pressure is increased, the gate opens more, allowing more fluid to flow through the valve. Conversely, when the air pressure is decreased, the gate closes more, reducing the flow of fluid.

The pneumatic gate valve is often used in high-pressure systems, such as oil and gas pipelines, where the flow of fluid needs to be controlled quickly and accurately. The valve's quick response time and precise control make it an ideal choice for these applications. Additionally, pneumatic gate valves are easy to maintain and repair, as they are designed to be disassembled and reassembled without the need for special tools.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Manual Opening and Closing
5
Tevya
Avatar
10/21/2025 8:20 PM
Hello, I need a 2.5-inch knife gate valve like the one above. However, I want it to be manually opened and closed.
Was this review helpful? Yes No (0/0)
ATO Responded
This valve is pneumatically operated and requires a solenoid valve and air supply to operate. How would you like it to be opened and closed manually? What is the fluid medium? Can you provide the fluid's temperature and pressure data?
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Note: This knife gate valve cannot be used for drinking water.

Pneumatic knife gate valve with strong cut-off force, self-cleaning function, 2-1/2" bore size, pressure range 1MPa-1.6MPa. The knife gate valve is light and flexible in operation, small in size, has smooth passage, low flow resistance, easy to install.

Note:

  • Double Acting: Ventilation On, Ventilation Off; Maintain current position in case of air source failure.
  • Single Acting AC, Air-Open: Ventilation On, Air Disconnected; Close on air source failure.
  • Single Acting AC, Air-Close: Ventilation Off, Air Disconnected; Open on air source failure.

Specification

  • Model: ATO-FC-PKGV-65
  • Drive mode: Pneumatic
  • Nominal Diameter: 2-1/2 Inch (DN65)
  • The direction of Flow: Unidirectional default (Please contact us for bidirectional)
  • Seal Material:  Stainless steel 304 (Other materials please contact us)
  • Body Material (Optional): Cast steel or stainless steel
  • Number of Gates: Single gates
  • Connection Mode: Flange/lug/wafer
  • Working Pressure: 1.0MPa (PN10)
  • Air Source: 2.5bar-8bar
  • Medium: Slurry, material, viscous fluid
  • Working Temperature: -30-300°C
  • Medium Temperature: -20-150°C
  • Mode of Action: Double acting, single acting normally closed, single acting normally open

Features

  • The 2-1/2 inch pneumatic knife gate valve adopts a one-piece structure, ultra-thin design, full-diameter flow, and is not prone to leakage, with convenient disassembly and assembly.
  • The stainless steel knife gate valve has good sealing performance, strong wear resistance, automatic compensation, and long service life.
  • The fixed guide claw design, replacement groove structure, and is not easy to accumulate and prevents jamming.
  • The double-bearing design has low torque, frequent opening and closing, no vibration, and no noise.
  • The pneumatic knife gate valve has strong cutting force and self-cleaning function, and is suitable for fiber particle fluid.

Dimension (Unit mm)

Pneumatic knife gate valve dimension

DNDD1D2bLz-dn-m
65180mm145mm120mm18mm50mm2-182-M16

Details

Pneumatic Knife Gate Valve Details
Applications

Knife gate valves are generally used for the circulation of media such as paper pulp, coal ash, chemical materials, sewage, and foodstuffs. ATO knife gate valve has the remarkable advantages of light switch, good sealing, good elastic memory, and long service life. It can be widely used in water, sewage, construction, petroleum, chemical, food, medicine, light textile, electric power, ship metallurgy, energy system and another body pipeline as a regulating and intercepting device.Knife gate valve application

Tips: How does a pneumatic gate valve work?

A pneumatic gate valve is a type of valve that uses compressed air to control the flow of fluid. The valve consists of a gate, which is mounted on a stem, and a body that houses the mechanism for controlling the flow of fluid. The gate is designed to move vertically up and down, opening or closing the valve.

When compressed air is supplied to the valve, it acts on a piston inside the body, causing it to move and open or close the gate. The movement of the gate is controlled by the air pressure, which can be adjusted to control the flow of fluid. When the air pressure is increased, the gate opens more, allowing more fluid to flow through the valve. Conversely, when the air pressure is decreased, the gate closes more, reducing the flow of fluid.

The pneumatic gate valve is often used in high-pressure systems, such as oil and gas pipelines, where the flow of fluid needs to be controlled quickly and accurately. The valve's quick response time and precise control make it an ideal choice for these applications. Additionally, pneumatic gate valves are easy to maintain and repair, as they are designed to be disassembled and reassembled without the need for special tools.

Product reviews
Manual Opening and Closing
5
Tevya
Avatar
10/21/2025 8:20 PM
Hello, I need a 2.5-inch knife gate valve like the one above. However, I want it to be manually opened and closed.
Was this review helpful? Yes No (0/0)
ATO Responded
This valve is pneumatically operated and requires a solenoid valve and air supply to operate. How would you like it to be opened and closed manually? What is the fluid medium? Can you provide the fluid's temperature and pressure data?
Only registered users can write reviews
Customers who bought this item also bought

2" Pneumatic Knife Gate Valve

ATO-FC-PKGV-50
$871.69
Purchase pneumatic knife gate valve for opening and closing pipelines, with a nominal diameter of 2 inches and a pressure range of 1 to 1.6 MPa. The cast steel/stainless steel pneumatic knife gate valve is mainly composed of a valve body and gate plate, with a compact design and short structural length, saving installation space and effectively supporting pipeline strength.