1kVA 110V to 120V/240V Split Phase Transformer

$1,343.75
Split phase transformer capacity 1 kVA, convert primary voltage AC 110V to secondary voltage 120V/240VAC, support voltage customization, frequency 50/60Hz. 1 kVA single phase to split phase transformer is suitable for indoor and outdoor use.
SKU: ATO-T-DGS1kVA
*
*
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 10-16 days

Low price 1 phase to split phase transformer capacity 1 kVA, input voltage AC 110V/120V/220V/440V/480, output voltage 120V/240V AC. Split transformer has high protection level, low heat emission, sturdy and durable shell, which is an ideal choice for saving money.

1 kVA Split Phase Transformer Specifications

ModelATO-DGS1kVA
PhaseSingle phase to split phase
Capacity1 kVA
Primary Voltage1 Phase / 2 phase 110, 120, 208, 220, 230, 240, 380, 415, 440, 460, 480,
Secondary Voltage120V/240V AC(L1、L2、N;L+L=240V,L+N=120V)
Frequency50/60Hz
Winding MaterialAluminum/Copper wire (Optional)
Work Efficiency≥95%
Insulation Resistance≥50 MΩ
Electrical Strength2000V AC/1 min
Noise≤35dB (1 meter)
Insulation GradeGrade B (130℃), Grade F (155℃), Grade H (180℃)
Cooling MethodNatural or air cooling
Overload CapacityAllow more than 1.2 times rated load to work for up to 1 hour
Induced Overvoltage Withstand Test125Hz/800V/min
Transformation Ratio<3%
Air Carrying Current<6%
Impedance VoltageAbout 6%
Total Losses10%
CertificationCE, ISO
Temperature-15℃~+45℃
Humidity≤90%RH, without condensation
Altitude<2000m, non corrosive gas and conductive dust
Enclosure Protection GradeIP20
Warranty12 months
Weight of Aluminium Wire TransformerOpen type: 20kg
Protected type: 36kg
Weight of Copper Wire TransformerOpen type: 19kg
Protected type: 37kg

Split Transformer Schematic Diagram
Single phase to split phase transformer schematic diagram
1 kVA Split Isolation Transformer Dimension (Unit: mm)
Split phase isolation transformer dimension

Aluminium Wire Transformer SizeCopper Wire Transformer Size
Open type: a*b*c=192*160*220mmOpen type: a*b*c=180*160*210mm
Mouting size: D*E=140*120mm (aperture: 17*8mm)Mouting size: D*E=130*120mm (aperture: 17*8mm)
Protected type: A*B*C=250*360*420mmProtected type: A*B*C=250*360*420mm

Details

Single Phase Isolation Transformer Details

Tips: What environment is the reactor suitable for?
The series reactor is mainly used to limit the short-circuit current, and it is also used in series or in parallel with the capacitor in the filter to limit the higher harmonics in the power grid. The reactors in 220kV, 110kV, 35kV, and 10kV power grids are used to absorb the charging capacitive reactive power of the cable line. The operating voltage can be adjusted by adjusting the number of series reactors.

The reactor used in the power grid is essentially an air-core coil with no magnetic material. It can be arranged in three assembly forms: vertical, horizontal and character-shaped. When a short circuit occurs in the power system, a large short-circuit current will be generated. If it is not restricted, it is very difficult to maintain the dynamic and thermal stability of electrical equipment.

Therefore, in order to meet the interrupting capacity requirements of some circuit breakers, reactors are often connected in series at the outgoing circuit breaker to increase the short-circuit impedance and limit the short-circuit current. Due to the use of reactors, when a short circuit occurs, the voltage drop on the reactor is larger, so it also plays a role in maintaining the voltage level of the bus, so that the voltage fluctuation of the bus is small, and the user's electrical equipment on the non-faulty line is guaranteed Stability of operation.

Applicable environment of series reactor:

1. The altitude does not exceed 2000 meters;
2. The operating environment temperature is -25~+45(℃), and the relative humidity does not exceed 90%;
3. There is no harmful gas around, no flammable and explosive materials;
4. The surrounding environment should have good ventilation conditions. If the series reactor is installed in the cabinet, ventilation equipment should be installed.

Product reviews
I have some doubts about the 1kVA split-phase transformer
5
Mkrenz
Avatar
10/27/2021 12:06 AM
We want to remove the wheels on your 1kVA split phase transformer and use the holes to install the transformer on our support. Could you confirm to us if it’s possible?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can remove the wheels on the transformer, its free option.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low price 1 phase to split phase transformer capacity 1 kVA, input voltage AC 110V/120V/220V/440V/480, output voltage 120V/240V AC. Split transformer has high protection level, low heat emission, sturdy and durable shell, which is an ideal choice for saving money.

1 kVA Split Phase Transformer Specifications

ModelATO-DGS1kVA
PhaseSingle phase to split phase
Capacity1 kVA
Primary Voltage1 Phase / 2 phase 110, 120, 208, 220, 230, 240, 380, 415, 440, 460, 480,
Secondary Voltage120V/240V AC(L1、L2、N;L+L=240V,L+N=120V)
Frequency50/60Hz
Winding MaterialAluminum/Copper wire (Optional)
Work Efficiency≥95%
Insulation Resistance≥50 MΩ
Electrical Strength2000V AC/1 min
Noise≤35dB (1 meter)
Insulation GradeGrade B (130℃), Grade F (155℃), Grade H (180℃)
Cooling MethodNatural or air cooling
Overload CapacityAllow more than 1.2 times rated load to work for up to 1 hour
Induced Overvoltage Withstand Test125Hz/800V/min
Transformation Ratio<3%
Air Carrying Current<6%
Impedance VoltageAbout 6%
Total Losses10%
CertificationCE, ISO
Temperature-15℃~+45℃
Humidity≤90%RH, without condensation
Altitude<2000m, non corrosive gas and conductive dust
Enclosure Protection GradeIP20
Warranty12 months
Weight of Aluminium Wire TransformerOpen type: 20kg
Protected type: 36kg
Weight of Copper Wire TransformerOpen type: 19kg
Protected type: 37kg

Split Transformer Schematic Diagram
Single phase to split phase transformer schematic diagram
1 kVA Split Isolation Transformer Dimension (Unit: mm)
Split phase isolation transformer dimension

Aluminium Wire Transformer SizeCopper Wire Transformer Size
Open type: a*b*c=192*160*220mmOpen type: a*b*c=180*160*210mm
Mouting size: D*E=140*120mm (aperture: 17*8mm)Mouting size: D*E=130*120mm (aperture: 17*8mm)
Protected type: A*B*C=250*360*420mmProtected type: A*B*C=250*360*420mm

Details

Single Phase Isolation Transformer Details

Tips: What environment is the reactor suitable for?
The series reactor is mainly used to limit the short-circuit current, and it is also used in series or in parallel with the capacitor in the filter to limit the higher harmonics in the power grid. The reactors in 220kV, 110kV, 35kV, and 10kV power grids are used to absorb the charging capacitive reactive power of the cable line. The operating voltage can be adjusted by adjusting the number of series reactors.

The reactor used in the power grid is essentially an air-core coil with no magnetic material. It can be arranged in three assembly forms: vertical, horizontal and character-shaped. When a short circuit occurs in the power system, a large short-circuit current will be generated. If it is not restricted, it is very difficult to maintain the dynamic and thermal stability of electrical equipment.

Therefore, in order to meet the interrupting capacity requirements of some circuit breakers, reactors are often connected in series at the outgoing circuit breaker to increase the short-circuit impedance and limit the short-circuit current. Due to the use of reactors, when a short circuit occurs, the voltage drop on the reactor is larger, so it also plays a role in maintaining the voltage level of the bus, so that the voltage fluctuation of the bus is small, and the user's electrical equipment on the non-faulty line is guaranteed Stability of operation.

Applicable environment of series reactor:

1. The altitude does not exceed 2000 meters;
2. The operating environment temperature is -25~+45(℃), and the relative humidity does not exceed 90%;
3. There is no harmful gas around, no flammable and explosive materials;
4. The surrounding environment should have good ventilation conditions. If the series reactor is installed in the cabinet, ventilation equipment should be installed.

Product reviews
I have some doubts about the 1kVA split-phase transformer
5
Mkrenz
Avatar
10/27/2021 12:06 AM
We want to remove the wheels on your 1kVA split phase transformer and use the holes to install the transformer on our support. Could you confirm to us if it’s possible?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, we can remove the wheels on the transformer, its free option.
Only registered users can write reviews