15V DC 5A 150W Switching Power Supply

$91.91
Favorable price 150W SMPS power supply converts AC input to 15V DC at a rated current of 5A with short circuit, overload and overvoltage protections. ATO switching power supply is high reliability and high efficiency, which can be used for DC power supply for wide applications.
SKU: ATO-SMPS-150-515
Free Shipping
Delivery date: 6-12 days

ATO switching power supply incorporates a switching regulator in order to be highly efficient in the conversion of electrical power.

Features

  • Universal AC input / Full range AC input
  • Short circuit, overload and overvoltage protections
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • High reliability, low price and wide range of applications

Specification

ModelATO-HF150W-DL
Output
DC Voltage±15V DC
Rated Current5A
Current Range0.5 ~ 5A
Rated Power150W
Ripple & Noise (Max.)(Note 2)150mVp-p
Voltage Adjust RangeRated output voltage ±5%
Voltage Tolerance (Note 3)±1.0%
Line Regulation±0.5%
Load Regulation±0.5%
Setup, Rise, Holdup Time200ms, 100ms, 30ms
InputVoltage Range170 ~ 264VAC (210 ~ 370VDC)
Frequency Range47~63Hz
Efficiency (Typ.)85%
AC Current (Typ.)1.3A/115V AC 0.65A/230V AC
Inrush Current (Typ.)Cold start: 40A/230V AC
Leakage Current<0.7mA/230V AC
ProtectionOverload105~130% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
EnvironmentWorking Temperature-20 ~ +50℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL1012 Approved
Withstand VoltageI/P-O/P: 1.5KVAC
I/P-FG: 1.5KVAC
O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to FCC Part15 Jconduction Class B
OthersMTBF≥408.3K hrs MIN. MIL-HDBK-217F (25℃)
Dimension199*98*40mm (L*W*H)
Weight0.68kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Installation Dimension (Unit: mm)

Installation dimensiions of 150W switching power supply

Details

150W DC Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge / Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: The method of improving the standby efficiency of switching power supply

  • Cut off the starting resistor
    For the flyback power supply, the control chip is powered by the auxiliary winding after startup, and the voltage drop on the startup resistor is about 300V. Assuming that the starting resistance is 47kΩ, the power consumption is nearly 2W. To improve standby efficiency, the resistive channel must be cut off after startup. If the controller does not have a special start-up circuit, a capacitor can also be connected in series with the start-up resistor, and the loss after start-up can be gradually reduced to zero. The disadvantage is that the power supply cannot be restarted by itself, and the circuit can be restarted only after the input voltage is disconnected to discharge the capacitor.
  • lower clock frequency
    The clock frequency can drop smoothly or suddenly. The smooth decline is that when the feedback amount exceeds a certain threshold, the linear decline of the clock frequency is realized through a specific module.
Product reviews
This product is great.
5
Juan
Avatar
4/18/2022 3:26 AM
I bought this 15V 5 amps switching power supply to drive some 12V linear actuators for a CNC table. It was working great. The company has been responding to my emails. Good product and good company. Very good investment. I will buy again if another project needs one.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

ATO switching power supply incorporates a switching regulator in order to be highly efficient in the conversion of electrical power.

Features

  • Universal AC input / Full range AC input
  • Short circuit, overload and overvoltage protections
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • High reliability, low price and wide range of applications

Specification

ModelATO-HF150W-DL
Output
DC Voltage±15V DC
Rated Current5A
Current Range0.5 ~ 5A
Rated Power150W
Ripple & Noise (Max.)(Note 2)150mVp-p
Voltage Adjust RangeRated output voltage ±5%
Voltage Tolerance (Note 3)±1.0%
Line Regulation±0.5%
Load Regulation±0.5%
Setup, Rise, Holdup Time200ms, 100ms, 30ms
InputVoltage Range170 ~ 264VAC (210 ~ 370VDC)
Frequency Range47~63Hz
Efficiency (Typ.)85%
AC Current (Typ.)1.3A/115V AC 0.65A/230V AC
Inrush Current (Typ.)Cold start: 40A/230V AC
Leakage Current<0.7mA/230V AC
ProtectionOverload105~130% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
EnvironmentWorking Temperature-20 ~ +50℃
Working Humidity20~90% RH non-condensing
Storage Temperature-20~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL1012 Approved
Withstand VoltageI/P-O/P: 1.5KVAC
I/P-FG: 1.5KVAC
O/P-FG: 0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to FCC Part15 Jconduction Class B
OthersMTBF≥408.3K hrs MIN. MIL-HDBK-217F (25℃)
Dimension199*98*40mm (L*W*H)
Weight0.68kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Installation Dimension (Unit: mm)

Installation dimensiions of 150W switching power supply

Details

150W DC Switching Power Supply Details

SMPS Power Supply Applications

  • Power Tools
    Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
  • Offices Devices
    Computer, Printer, LCD Monitor, Scanning Machine, etc.
  • Electrics & Household Appliance
    TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge / Freezr, Coffemarker, etc.
  • Industrial Equipemnt
    Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: The method of improving the standby efficiency of switching power supply

  • Cut off the starting resistor
    For the flyback power supply, the control chip is powered by the auxiliary winding after startup, and the voltage drop on the startup resistor is about 300V. Assuming that the starting resistance is 47kΩ, the power consumption is nearly 2W. To improve standby efficiency, the resistive channel must be cut off after startup. If the controller does not have a special start-up circuit, a capacitor can also be connected in series with the start-up resistor, and the loss after start-up can be gradually reduced to zero. The disadvantage is that the power supply cannot be restarted by itself, and the circuit can be restarted only after the input voltage is disconnected to discharge the capacitor.
  • lower clock frequency
    The clock frequency can drop smoothly or suddenly. The smooth decline is that when the feedback amount exceeds a certain threshold, the linear decline of the clock frequency is realized through a specific module.
Product reviews
This product is great.
5
Juan
Avatar
4/18/2022 3:26 AM
I bought this 15V 5 amps switching power supply to drive some 12V linear actuators for a CNC table. It was working great. The company has been responding to my emails. Good product and good company. Very good investment. I will buy again if another project needs one.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Hall Effect Current Sensor 50A/100A/300A/800A/1200A to 1500A

ATO-CUS-ACDC1500
$93.23
Hall effect current sensors are AC/DC universal current sensors, with split-core structure, 5us fast response time, 1.0%FS accuracy, 0-5V/ 0-±5VDC output signal, ±15V power supply, fixed installation. Open loop current sensors are widely used for AC and DC current monitoring, system signal acquisition and feedback control.