This was exactly what I needed to connect the wires on my automotive lift to my Generator until I finish getting my outside garage wired for 240 volts.
It was not a cheap flimsy Plug with connections that easily stripped. I would recommend this plug for any applications where this type of plug is needed.
Twist locking plug is suitable for medical devices, electronics, lighting, machinery, grills, generators and lifts, etc. It comes with nylon material, high quality and durable, fall resistant and explosion-proof. Plug matching socket has the function of clamping the power cord to prevent the phenomenon of slack power failure in the work.
Specification
| Model | ATO-LP5-15 |
| Plug Type | NEMA 5-15 Plug |
| Materials | Nylon and full copper |
| Certifications | UL/ CSA/ CUL |
| Rated Voltage | 125V |
| Rated Current | 15 Amp |
| Wiring & Connecting | 2 Pole 3 Wire |
| Terminal Clamp Material | 0.08" (2) steel-nickel plated |
| Terminal Screw Material | 10-32 Brass white finish on neutral screw when use |
| Ground Screw Material | 10-32 Brass (green finish), multi-device |
| Dielectric Voltage Withstand | 18000V minimum |
| Current Interrupting | Certified for current interrupt at full rate current |
| Temperature Resistant | Max 30℃ temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75℃ |
| Operating Temperatures | Maximum continuous 75℃ minimum-40℃ (w/o impact) |
| Terminal Identification | 14/3, 12/3, 10/3 AWG size conductors; terminals identified in accordance with UL498 (X, Y, Z, white, green) |
Tips: How to use the electrical locking plug correctly?
Improper use of the electrical locking plug is easy to cause electricity safety risks, grasp the correct use method to ensure that the locking plug can be better used by us. So, how to use the locking plug correctly?
- Prevent the occurrence of excess locking plug load. Each type of locking plug standard has a rated voltage and current, when use, you should ensure that the voltage and current of the inserted appliance is less than the rated voltage and current of it, otherwise it is easy to overload and heat, and even shorten its life span.
- If the locking plug is loose, bad contact and other phenomena, it should be repaired in time. If the repair is not good, it should be abandoned.
- Clean the locking plug regularly. The panel and jack are easy to accumulate dust. If the dust is not cleaned up for a long time, it will not only affect the appearance of the locking plug, but also make the copper rust easily, resulting in problems in the use of it. Accordingly, when using it, you should wipe the shell regularly with the alcohol of low concentration, and shake it to remove the dust in the jack.
Product reviews
High quality
wjl
4/21/2022 3:21 AM
Was this review helpful? (0/0)
Heavy duty locking plug
Adrian
5/20/2022 3:47 AM
This isn't a solid plug, and the connection can be easily stripped. This was exactly what I needed to connect the wires from the car lift to my generator until I finished wiring my outdoor garage to 240 volts. I would recommend this plug for any application that requires this type of plug.
Was this review helpful? (0/0)
Happy with this purchase
Enoch
3/17/2023 2:58 AM
The locking plug is cheap, well made, and fits perfectly into the socket, providing a solid connection. And the locking mechanism is easy to use and gives me peace of mind knowing my device won't be accidentally unplugged.
Was this review helpful? (0/0)
Supprized about the qualitity of the connectors
carey
11/1/2023 3:25 AM
I have bought a lot locking plugs from other websites before, either the quality is not good enough or the after-sales service is not good enough!! But at this time, this little thing is what i want! EXCELLENT!
Was this review helpful? (0/0)
Only registered users can write reviews