This 3600W adjustable DC power supply is built for high-current DC power requirements, delivering regulated output from 0–24V with a maximum current of 150A. Low ripple and strong load regulation help maintain consistent power delivery, while the grounded positive and negative terminals provide greater flexibility for different testing and power applications.
Specification
| Model | ATO-JK24150K |
| Input Voltage | Single Phase 110V or 220V AC (±15%) |
| Input Frequency | 50/60 Hz |
| Output Voltage | DC 0–24V |
| Output Current | 0–150A |
| Output Power | 3600 W |
| Power Supply Stability | ≤0.5% + 10 mV |
| Load Regulation | ≤0.5% + 30 mV |
| Ripple | ≤0.5% + 10 mV RMS |
| Voltage Display | 3½-digit digital meter; Accuracy: ±0.5% FS + 1 digit (10%–100% of rated value); Display range: 00.0–24.0V |
| Current Display | 3½-digit digital meter; Accuracy: ±0.5% FS + 1 digit (10%–100% of rated value); Display range: 00.0–150.0A |
| Insulation Resistance | Input-Output: ≥20 MΩ; Input-Case: ≥20 MΩ; Output-Case: ≥80 MΩ |
| Dielectric Strength | Input-Output: AC 1500V, 10mA, 1 minute; Input-Case: AC 1500V, 10mA, 1 minute; Output-Case: AC 1500V, 10mA, 1 minute |
| Overvoltage Protection | Built-in OVP; protection threshold: rated output voltage +5% |
| Overcurrent Protection | Constant-current output under overload and short-circuit conditions |
| Overtemperature Protection | Built-in OTP; protection threshold: 85°C ±5°C (heatsink temperature) |
| Voltage and Current Adjustment | Potentiometer |
| Output Polarity | Positive (+) and negative (-) outputs can be grounded independently |
| Cooling Method | Forced-Air Cooling |
| Operating Environment | Indoor use; Temperature: -10°C–40°C; Humidity: 10%–85% RH |
| Storage Environment | Temperature: -20–70°C; Humidity: 10%–90% RH |
| Dimensions | 430 × 255 × 155 mm (L × W × H) |
| Weight | 18kg |
Note: All values are typical and may vary under different load conditions or operating circumstances. Accuracy is measured under load-side voltage sensing conditions. Deviations from rated values may occur due to temperature variations and component aging.
Feature
- High-Current DC Output: Up to 150A at 24V DC makes this 3600W adjustable DC power supply suitable for high-current equipment, electronic testing, battery charging systems, and industrial DC power applications.
- Adjustable Voltage and Current: Independent potentiometer controls enable flexible output setting for different load requirements, making the adjustable DC power supply suitable for equipment testing, development, and laboratory applications.
- Stable, Low-Ripple Power: Excellent power supply stability and low ripple help maintain consistent DC output under changing load conditions, supporting reliable operation and accurate electronic testing.
- Flexible Output Configuration: Positive and negative output terminals can be grounded independently, allowing the variable DC power supply to integrate into different circuit configurations, test benches, and DC power systems.
- Reliable High-Power Performance: Forced-air cooling assists heat dissipation during continuous operation, while overvoltage, overcurrent, short-circuit, and overtemperature protection enhance safety and reliability in demanding applications.
Detail
Front

Back

Size (unit: mm)

Tips: How Can a 3600W Variable DC Power Supply Maintain Stable Operation?
During continuous high-power operation, maintain adequate ventilation around the 3600W variable DC power supply and keep the cooling airflow unobstructed. Stable input power and properly rated wiring help minimize voltage fluctuations and excessive heat. Regular monitoring of output voltage, current, and operating temperature can also support reliable performance and extend the service life of the adjustable DC power supply.