13000 rpm 12V 24V Small Brushless DC Motor

$255.16
High speed 13000 rpm brushless DC motor with low cost, small size, 73W power, providing 53.6 mN.m rated torque, high-temperature resistance, strong load capacity, sturdy and durable, 12 volt, 24 volt voltage for selection.
SKU: ATO-BLDC-13000R
*
*
Free Shipping
Delivery date: 8-12 days

Small Brushless DC motor Description

Small electric BLDC motor is 4 pole, three phase, rated power of 73W, operating on 12V or 24V, easy to wire and install, brushless design for long life and no load speed up to 13000 high rpm.

13000 rpm High Speed BLDC Motor Specifications

BasicsModelATOWS4255-130
TypeMicro Brushless DC Motor
Weight270g
SizeD:42mm, L:55mm
UsageBoat, Car, Electric Bicycle, Home Appliance, Industrial Equiment
Technical ParametersRated Power73W
Rated Voltage12V DC24V DC
Rated Current6.69A3.33A
Noload Current0.92A0.46A
Rated Speed10200 rpm
Noload Speed13000 rpm
Rated Torque53.6 mN.m
ConstructionPermanent Magnet
BearingNSK Ball Bearing
Efficiency90%
Motor HousingStainless steel
Insulation ClassClass B
Protect FeatureExplosion-proof
Wiring DiagramPin 1Red+5V
Pin 2PurpleHall A
Pin 3GreenHall B
Pin 4GreyHall C
Pin 5BlackGND
Pin 6YellowPhase A
Pin 7BluePhase B
Pin 8WhitePhase C
Click to see the matched controller specs

12V/24V Small BLDC Motor Dimension
13000 rpm bldc motor dimension

Details

13000rpm High Speed BrushlessDC Motor Details

Tips: How does the DC brushless motor brake?
DC brushless motor realize quick braking through the motor itself. There are two simple methods, one is the dynamic braking, another is the short circuit brake. Dynamic braking means to consume the kinetic energy of the motor on the external brake resistor, while short circuit brake consumes the kinetic energy of the brushless motor on the stator winding. Obviously, dynamic braking is more beneficial to reduce motor heating. However, short circuit brake does not require any modification to hardware, simple and convenience are its advantages.

In the so-called short circuit brake, upper bridge arms (or lower bridge arms) on the motor's driving MOS pipe are connected while the lower bridge arms (or upper bridge arms) are disconnected when braking, three phase stator winding of the BLDC motor are all short circuited. The generator in the state of power generation is equivalent to the short circuit of power supply. Resistance of the winding is relatively small, so it can produce a large short-circuit current, and kinetic energy of the motor can be released quickly, so that the motor instantaneously produces a great braking torque, which can realize rapid braking. The higher the motor speed, the larger the short-circuit current, the greater the braking force. However, it must be taken into account that the braking force can't exceed the bearing capacity of MOS pipe, therefore, short circuit brake is generally used when the motor speed is reduced to a certain value.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Running a 12V/24V High Speed ​​Small Brushless DC Motor with Driver

In this video, a 15000rpm 12V/24V small brushless DC motor is shown running perfectly with the controller.

Product reviews
Used this small brushless DC motor to replace an inferior motor that was turning an impeller.
5
Melissa Holman
Avatar
10/31/2018 2:58 AM
Used it (13000 rpm small brushless DC motor) to replace an inferior motor that was turning an impeller. This motor can do the job! It is the main motor in my furnace blower for DIY smelting and it performs admirably at 12v. It is very durable, reliable and strong.
Was this review helpful? Yes No (0/0)
I am interested in your 13000rpm brushless DC motor
5
Royy
Avatar
11/30/2021 8:32 PM
We are interested in your product: a 13000 rpm 12V 24V small brushless DC motor. Is the motor RPM speed can be controlled from 50 rpm to 13000 rpm with 5prm step?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, you can use a PWM signal (amplitude: 5V; frequency: 2 ~ 50kHz) to control the speed between 50 and 13000rpm.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Small Brushless DC motor Description

Small electric BLDC motor is 4 pole, three phase, rated power of 73W, operating on 12V or 24V, easy to wire and install, brushless design for long life and no load speed up to 13000 high rpm.

13000 rpm High Speed BLDC Motor Specifications

BasicsModelATOWS4255-130
TypeMicro Brushless DC Motor
Weight270g
SizeD:42mm, L:55mm
UsageBoat, Car, Electric Bicycle, Home Appliance, Industrial Equiment
Technical ParametersRated Power73W
Rated Voltage12V DC24V DC
Rated Current6.69A3.33A
Noload Current0.92A0.46A
Rated Speed10200 rpm
Noload Speed13000 rpm
Rated Torque53.6 mN.m
ConstructionPermanent Magnet
BearingNSK Ball Bearing
Efficiency90%
Motor HousingStainless steel
Insulation ClassClass B
Protect FeatureExplosion-proof
Wiring DiagramPin 1Red+5V
Pin 2PurpleHall A
Pin 3GreenHall B
Pin 4GreyHall C
Pin 5BlackGND
Pin 6YellowPhase A
Pin 7BluePhase B
Pin 8WhitePhase C
Click to see the matched controller specs

12V/24V Small BLDC Motor Dimension
13000 rpm bldc motor dimension

Details

13000rpm High Speed BrushlessDC Motor Details

Tips: How does the DC brushless motor brake?
DC brushless motor realize quick braking through the motor itself. There are two simple methods, one is the dynamic braking, another is the short circuit brake. Dynamic braking means to consume the kinetic energy of the motor on the external brake resistor, while short circuit brake consumes the kinetic energy of the brushless motor on the stator winding. Obviously, dynamic braking is more beneficial to reduce motor heating. However, short circuit brake does not require any modification to hardware, simple and convenience are its advantages.

In the so-called short circuit brake, upper bridge arms (or lower bridge arms) on the motor's driving MOS pipe are connected while the lower bridge arms (or upper bridge arms) are disconnected when braking, three phase stator winding of the BLDC motor are all short circuited. The generator in the state of power generation is equivalent to the short circuit of power supply. Resistance of the winding is relatively small, so it can produce a large short-circuit current, and kinetic energy of the motor can be released quickly, so that the motor instantaneously produces a great braking torque, which can realize rapid braking. The higher the motor speed, the larger the short-circuit current, the greater the braking force. However, it must be taken into account that the braking force can't exceed the bearing capacity of MOS pipe, therefore, short circuit brake is generally used when the motor speed is reduced to a certain value.

Product reviews
Used this small brushless DC motor to replace an inferior motor that was turning an impeller.
5
Melissa Holman
Avatar
10/31/2018 2:58 AM
Used it (13000 rpm small brushless DC motor) to replace an inferior motor that was turning an impeller. This motor can do the job! It is the main motor in my furnace blower for DIY smelting and it performs admirably at 12v. It is very durable, reliable and strong.
Was this review helpful? Yes No (0/0)
I am interested in your 13000rpm brushless DC motor
5
Royy
Avatar
11/30/2021 8:32 PM
We are interested in your product: a 13000 rpm 12V 24V small brushless DC motor. Is the motor RPM speed can be controlled from 50 rpm to 13000 rpm with 5prm step?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, you can use a PWM signal (amplitude: 5V; frequency: 2 ~ 50kHz) to control the speed between 50 and 13000rpm.
Only registered users can write reviews