125 hp Single Acting Axial Piston Pump

$3,986.76
Variable displacement pump power 125 horsepower, single acting type, nominal pressure 31.5MPa, rated speed 1500rpm, simple structure, only need to change the motor with oil plate can be used as a hydraulic motor, special applications in heavy industry and ships.
SKU: ATO-PP-160YCY
Free Shipping
Delivery date: 2-12 days

Single acting piston pump with simple structure, nominal flow rate of 160L/min at 1000r/min, nominal flow rate of 240L/min at 1000r/min, inlet and outlet diameter and connection and system matching, easy installation and disassembly.

Specification

  • Model: ATO-PP-160YCY
  • Max Drive Power: 125 hp (94.5 kW)
  • Driving Method: Hydraulic
  • Theoretic Flow: 1000rpm (160L), 1500rpm (240L)
  • Number of Impellers: Single stage
  • Pump Shaft Position: Horizontal
  • Nominal Displacement: 160 cc/rev
  • Nominal pressure: 31.5 Mpa
  • Material: Cast iron
  • Weight: 160 kg
  • Warranty: 12 Months

125 hp Single Acting Axial Piston Pump Dimension (unit: mm)

Axial piston pump dimension

Bbbo (N9)b1b2b3D0D1 (f9)D2D3d (h6)d1d3
32934016100120901981502403005552M22 x 1.5

Hydraulic piston pump dimension

h1h3LII0I1I2I3I4I5td0 x h0
14125525106100411018023041159M16 x 35


Axial Piston Pump Detail

Axial piston pump detail

Tips: What should be noted when using the oil pump?

  • The inlet and outlet of the oil pump must be fitted with a combination of gaskets and a layer of grease on the outside of the pipe joint after it is connected to prevent air from entering.
  • Be sure to fill the oil return hole before use, otherwise the oil pump will be short of oil and instant wear.
  • After injecting oil and connecting all the pipes, it should be idle for 10 minutes and then start to play pressure, so that the residual air in the pump and pipes can be discharged.
  • The oil pump's oil inlet can not be installed with a screen or filter, which will cause damage to the oil pump due to insufficient oil suction. The filter can be installed in the oil tank or in the oil outlet.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Reliable and durable
5
Ava
Avatar
10/15/2025 8:19 PM
We installed this 125 hp single acting axial piston pump in one of our heavy industrial machines, and it’s been performing exceptionally well. The build quality feels solid, and the pump runs smoothly at its rated speed with very stable pressure output. I really like the versatility — by simply changing the motor with the oil plate, it can also function as a hydraulic motor, which adds great flexibility for different setups. It’s efficient, powerful, and surprisingly quiet for its size. After months of continuous operation, it has proven to be both reliable and durable. A great choice for heavy-duty and marine applications.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Single acting piston pump with simple structure, nominal flow rate of 160L/min at 1000r/min, nominal flow rate of 240L/min at 1000r/min, inlet and outlet diameter and connection and system matching, easy installation and disassembly.

Specification

  • Model: ATO-PP-160YCY
  • Max Drive Power: 125 hp (94.5 kW)
  • Driving Method: Hydraulic
  • Theoretic Flow: 1000rpm (160L), 1500rpm (240L)
  • Number of Impellers: Single stage
  • Pump Shaft Position: Horizontal
  • Nominal Displacement: 160 cc/rev
  • Nominal pressure: 31.5 Mpa
  • Material: Cast iron
  • Weight: 160 kg
  • Warranty: 12 Months

125 hp Single Acting Axial Piston Pump Dimension (unit: mm)

Axial piston pump dimension

Bbbo (N9)b1b2b3D0D1 (f9)D2D3d (h6)d1d3
32934016100120901981502403005552M22 x 1.5

Hydraulic piston pump dimension

h1h3LII0I1I2I3I4I5td0 x h0
14125525106100411018023041159M16 x 35


Axial Piston Pump Detail

Axial piston pump detail

Tips: What should be noted when using the oil pump?

  • The inlet and outlet of the oil pump must be fitted with a combination of gaskets and a layer of grease on the outside of the pipe joint after it is connected to prevent air from entering.
  • Be sure to fill the oil return hole before use, otherwise the oil pump will be short of oil and instant wear.
  • After injecting oil and connecting all the pipes, it should be idle for 10 minutes and then start to play pressure, so that the residual air in the pump and pipes can be discharged.
  • The oil pump's oil inlet can not be installed with a screen or filter, which will cause damage to the oil pump due to insufficient oil suction. The filter can be installed in the oil tank or in the oil outlet.
Product reviews
Reliable and durable
5
Ava
Avatar
10/15/2025 8:19 PM
We installed this 125 hp single acting axial piston pump in one of our heavy industrial machines, and it’s been performing exceptionally well. The build quality feels solid, and the pump runs smoothly at its rated speed with very stable pressure output. I really like the versatility — by simply changing the motor with the oil plate, it can also function as a hydraulic motor, which adds great flexibility for different setups. It’s efficient, powerful, and surprisingly quiet for its size. After months of continuous operation, it has proven to be both reliable and durable. A great choice for heavy-duty and marine applications.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews