120 Nm, Pneumatic Screw Driver, 1/4", 10000 rpm

$151.68
The pneumatic screwdriver is used for tapping and removing screws up to 6mm, with a 1/4" air inlet, a maximum torque of 120 Nm, and a no-load speed of 10,000 rpm. The pneumatic screwdriver is easy to operate with one hand and can help reduce operator fatigue during long hours of use, making it a common tool for industrial-grade factory lines.
SKU: ATO-PSD-508
Free Shipping
Delivery date: 10-12 days

The 1/4" pistol grip air screwdriver provides a maximum torque of 120 Nm and a no-load speed of 10,000 rpm, with a silenced exhaust design to effectively reduce noise. Pneumatic screw driver is comfortable and non-slip, easy to operate, and can be used to tighten and remove screws quickly.

Specification

ModelATO-PSD-ASL-508
Air Inlet1/4"
No-Load Speed10000rpm
Working Pressure0.63 Mpa
Max Torque120 Nm
Bolting CapacityM5-M8
Net Weight1kg

Features

  • The pistol grip air screwdriver has a built-in powerful movement, which can withstand high-speed rotation, work continuously for 24 hours, and adapt to high-intensity operations.
  • High concentricity, precise and no deviation, attack, and demolition in one step.
  • Forward and reverse switch, R gear to drive the screw, L gear to back the screw, no rotation in the middle, easy to operate.
  • The ATO pneumatic screwdriver conforms to the ergonomic structure, which is comfortable to use and will not feel tired after working for a long time.
  • Pneumatic screw driver with silent exhaust design, reduce noise, good mechanical performance.

Dimension Unit (mm)

120 Nm air impact screwdrive dimension

Applications

Pneumatic screw driver applications

Tips: Precautions for using pneumatic screwdrivers

  1. Check before using a moving screwdriver, and a special person should be responsible.
  2. If it is found that the moving screwdriver lacks parts or is damaged, repair it in time, otherwise it cannot be used.
  3. The socket connection must be connected with a special pin and sealed with a rubber ring. (screwdriver clamping type)
  4. It is forbidden to load and unload the pneumatic wrench head with the wind (without closing the air valve) and clean the pneumatic wrench with the wind.
  5. After all kinds of equipment are used up, remove the quick connectors, clean them and keep them properly.
  6. When using a dynamic screwdriver, do not overload it, and do not idle at high speed to prevent premature mechanical wear.
  7. If a secondary impact is found during the use of the pneumatic torque screwdriver, it should be stopped immediately for inspection, disassembly on site (referring to unclean places) is prohibited, and it should be sent to the repair department for inspection in time.

In this video, we've walked you through the step-by-step procedure for wiring an AC contactor to establish the latching circuit and we also showed you how to achieve motor control with the established latching circuit.

Product reviews
High efficiency
5
Knox
Avatar
4/20/2025 9:14 PM
This pneumatic screw driver is very easy to use, with strong power, stable torque, no slipping and no effort. The sound control is also good, not particularly noisy, the overall texture and workmanship are very solid, which can help reduce fatigue after long hours of work.
Was this review helpful? Yes No (0/0)
Super useful
5
Aaron
Avatar
9/22/2025 11:59 PM
Total lifesaver for my car fixes. 120Nm torque handles M5-M8 screws easy, 10000rpm is fast, and flip between forward/reverse quick. Quiet, comfy grip, 1kg light, no tired hands. Super useful.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The 1/4" pistol grip air screwdriver provides a maximum torque of 120 Nm and a no-load speed of 10,000 rpm, with a silenced exhaust design to effectively reduce noise. Pneumatic screw driver is comfortable and non-slip, easy to operate, and can be used to tighten and remove screws quickly.

Specification

ModelATO-PSD-ASL-508
Air Inlet1/4"
No-Load Speed10000rpm
Working Pressure0.63 Mpa
Max Torque120 Nm
Bolting CapacityM5-M8
Net Weight1kg

Features

  • The pistol grip air screwdriver has a built-in powerful movement, which can withstand high-speed rotation, work continuously for 24 hours, and adapt to high-intensity operations.
  • High concentricity, precise and no deviation, attack, and demolition in one step.
  • Forward and reverse switch, R gear to drive the screw, L gear to back the screw, no rotation in the middle, easy to operate.
  • The ATO pneumatic screwdriver conforms to the ergonomic structure, which is comfortable to use and will not feel tired after working for a long time.
  • Pneumatic screw driver with silent exhaust design, reduce noise, good mechanical performance.

Dimension Unit (mm)

120 Nm air impact screwdrive dimension

Applications

Pneumatic screw driver applications

Tips: Precautions for using pneumatic screwdrivers

  1. Check before using a moving screwdriver, and a special person should be responsible.
  2. If it is found that the moving screwdriver lacks parts or is damaged, repair it in time, otherwise it cannot be used.
  3. The socket connection must be connected with a special pin and sealed with a rubber ring. (screwdriver clamping type)
  4. It is forbidden to load and unload the pneumatic wrench head with the wind (without closing the air valve) and clean the pneumatic wrench with the wind.
  5. After all kinds of equipment are used up, remove the quick connectors, clean them and keep them properly.
  6. When using a dynamic screwdriver, do not overload it, and do not idle at high speed to prevent premature mechanical wear.
  7. If a secondary impact is found during the use of the pneumatic torque screwdriver, it should be stopped immediately for inspection, disassembly on site (referring to unclean places) is prohibited, and it should be sent to the repair department for inspection in time.
Product reviews
High efficiency
5
Knox
Avatar
4/20/2025 9:14 PM
This pneumatic screw driver is very easy to use, with strong power, stable torque, no slipping and no effort. The sound control is also good, not particularly noisy, the overall texture and workmanship are very solid, which can help reduce fatigue after long hours of work.
Was this review helpful? Yes No (0/0)
Super useful
5
Aaron
Avatar
9/22/2025 11:59 PM
Total lifesaver for my car fixes. 120Nm torque handles M5-M8 screws easy, 10000rpm is fast, and flip between forward/reverse quick. Quiet, comfy grip, 1kg light, no tired hands. Super useful.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews