Note: This butterfly valve cannot be used for drinking water.
Heavy duty large diameter 12 inch wafer type butterfly valve with pneumatic actuator, comes with 300mm (DN300) threaded port and stainless steel disc. Our high performance air actuated cast iron butterfly valve can work at high temperature below 120 °C, which is a reliable air tool for flow control.
Specification
| Butterfly Valve | Model | ATO-PBV-300 |
| Media | Water, Air, Gas, Oil, Liquid, etc. | |
| Butterfly Valve Type | Wafer Type | |
| Port Size | 12 inch (DN300, 300mm) | |
| Body Material | Cast Iron | |
| Seat Material | EPDM | |
| Disc Material | Stainless Steel (SS) | |
| Working Temperature | -10 °C to 120 °C | |
| Pneumatic Actuator | Model | ATO-AT160D |
| Actuator Type | Double Acting | |
| Bore Size | 160mm | |
| Air Pressure | 0.25 - 0.8MPa, PN16 | |
| Pressure Difference | 0 - 1.0MPa | |
| Air Supply Port | 1/4 inch | |
| Actuator Material | Aluminum Alloy |
Wafer Butterfly Valve Body Dimension (Unit: mm)

| DN | L | H1 | H2 | A | D | D1 | N-φd |
| 300 | 77 | 242 | 577 | 450 | 407 | 370 | 4-29 |
Pneumatic Actuator Dimension (Unit: mm)

ATO-AT160D
| Q | A | B | C | D | E | F | G | H | I |
| Φ102/Φ125mm | 450mm | 193mm | 89mm | 104mm | 226mm | 197mm | 30mm | 80mm | PF |
| J | K | O | P | S | T | U | V | W | X |
| M6 | 1/4" | 30mm | 80mm | 4mm | 4mm | 12mm | 24mm | 16mm | 32mm |
Details

Tips for installing a pneumatic butterfly valve
- Before installation, check whether all parts of the pneumatic butterfly valve are missing. Check for debris in the valve body, blockage in the solenoid valve and muffler.
- Put the valve and cylinder in the closed state.
- Install the cylinder on the valve (the installation direction can be parallel or perpendicular to the valve body), and then check whether the screw holes are aligned. There will not be much deviation. If there is a little deviation, just turn the cylinder body a little. , and then tighten the screws.
- After the installation is completed, debug the pneumatic butterfly valve.
- It should be kept dry before installation and cannot be stored in the open air.
- Before installing the butterfly valve, check the pipeline to ensure that there is no foreign matter such as welding slag in the pipeline
- Open the butterfly valve completely, and use a wrench to tighten the bolts in diagonal order without washer. Do not over-tighten the bolts to prevent serious deformation of the valve ring and excessive opening and closing torque.
Product reviews
Excellent 12" pneumatic wafer butterfly valve
Gianna
1/13/2025 5:47 PM
This 12" pneumatic wafer butterfly valve fully meets our needs. It has excellent strength and corrosion resistance, can operate stably in various harsh working environments, maintain reliable sealing effect, and avoid any leakage problems.
Was this review helpful? (0/0)
Only registered users can write reviews