10hp (7.5kW) Explosion Proof Motor, 380V, 2P/ 3P/ 4P

$1,855.87
10hp explosion proof motor at affordable price. Flameproof motor with rated frequency 50Hz, B3/ B5/ B35 three mounting types are optional, 3000r/min/ 1500r/min/ 1000r/min synchronous speed. Flameproof three-phase asynchronous motor is widely used in sectors such as textiles, metallurgy, city gas, transportation, grain and oil processing, papermaking, and medicine.
SKU: ATO-WEX3-132S2
*
*
Free Shipping
Delivery date: 10-12 days

Factory price flameproof motor with 2P/ 3P/ 4P can be chosen, rated voltage 380V, -20℃~40℃ ambient temperature, IP55 enclosure and IC411 cooling type.

Specification

ModelATO-WEX3-132S2
Numbers of poles2P/ 4P/ 6P
Synchronous speed3000r/min/ 1500r/min/ 1000r/min
Mounting typesB3/ B5/ B35
Rated power10hp (7.5kW)
Rated voltage380V (380V-660V can be customized)
Frequency50Hz
DutyS1
Ambient temperature-20℃~40℃
Altitude≤1000m
Humidity≤90%
Terminal box positionTop
Type of cable entryCable grand
EnclosureIP55
Inverter operationInverter use ready up to 500V acc
InsulationClass F
Cooling typeIC411
Shaft keyType A
LubricationSealed
Connectiom"Y" connection
Fan materialEngineered plastic
Rotation directionClockwise rotation at drive end
Winding temperature measurementThermistors (PTC)
Anti-corrosion gradeC3
CertificatesIEC, EX, ATEX
Explosion-proof markEx d I Mb, Ex d ⅡB T4 Gb, Ex d ⅡC T4 Gb
Warranty12 months

Dimensions (mm)

Mounting typeFrame sizeMounting dimensions(mm)Outline dimensions (mm)
AA/2BCHnKMNPRSTAAEVLAABBBHAACHDL
Ex db ebEx db
B3132S21610814089132412------56502223.5-2622662501871820249392395515
B3521610814089132412265230300014.5456502223.5162622662501871820249392395515
B5----132--265230300014.54----16------249410413515

Dimension of explosion proof of B3

Dimension of explosion proof of B35

Dimension of explosion proof of B5

Frame sizeShaft (mm)
DEFGADB
132S38801041M12*28

Dimension of explosion proof motor of draft

Details

7500W Explosion Proof Motor Details

Tips: How to Maintain Explosion Proof Motor?

1. When inspecting the stator core, pay attention to whether the stator core is compressed. If the core is found to be loose, a wedge made of an insulating plate should be driven into the slack; when inspecting the slot of the stator coil, pay attention to the coil Notch section. Loose and discolored slot wedges must be dealt with.

2. When checking the end of the coil, check the insulation for damage and the condition of the paint film. Pay attention to the end fixation. If there is a loose end at the end, a spacer should be added, or a new spacer and tie wire should be used to fasten the end; the insulation paint film at the end of the coil should be cracked or peeled off, and should be re-strengthened insulation.

3. Note that no debris should be left in the motor. Use a megger to measure the insulation resistance of the coil.

4. When the rotor is overhauled, blow the rotor clean with compressed air; check the welding condition of the coil, wire rod and joint; check and deal with the loose and damaged wedge; check the fan itself and its fixing condition; check the condition of the slip ring, The unevenness of the slip ring surface should not exceed 0.5mm; check the insulation of the rotor coil and the tie wires, and strengthen the insulation if necessary.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Factory price flameproof motor with 2P/ 3P/ 4P can be chosen, rated voltage 380V, -20℃~40℃ ambient temperature, IP55 enclosure and IC411 cooling type.

Specification

ModelATO-WEX3-132S2
Numbers of poles2P/ 4P/ 6P
Synchronous speed3000r/min/ 1500r/min/ 1000r/min
Mounting typesB3/ B5/ B35
Rated power10hp (7.5kW)
Rated voltage380V (380V-660V can be customized)
Frequency50Hz
DutyS1
Ambient temperature-20℃~40℃
Altitude≤1000m
Humidity≤90%
Terminal box positionTop
Type of cable entryCable grand
EnclosureIP55
Inverter operationInverter use ready up to 500V acc
InsulationClass F
Cooling typeIC411
Shaft keyType A
LubricationSealed
Connectiom"Y" connection
Fan materialEngineered plastic
Rotation directionClockwise rotation at drive end
Winding temperature measurementThermistors (PTC)
Anti-corrosion gradeC3
CertificatesIEC, EX, ATEX
Explosion-proof markEx d I Mb, Ex d ⅡB T4 Gb, Ex d ⅡC T4 Gb
Warranty12 months

Dimensions (mm)

Mounting typeFrame sizeMounting dimensions(mm)Outline dimensions (mm)
AA/2BCHnKMNPRSTAAEVLAABBBHAACHDL
Ex db ebEx db
B3132S21610814089132412------56502223.5-2622662501871820249392395515
B3521610814089132412265230300014.5456502223.5162622662501871820249392395515
B5----132--265230300014.54----16------249410413515

Dimension of explosion proof of B3

Dimension of explosion proof of B35

Dimension of explosion proof of B5

Frame sizeShaft (mm)
DEFGADB
132S38801041M12*28

Dimension of explosion proof motor of draft

Details

7500W Explosion Proof Motor Details

Tips: How to Maintain Explosion Proof Motor?

1. When inspecting the stator core, pay attention to whether the stator core is compressed. If the core is found to be loose, a wedge made of an insulating plate should be driven into the slack; when inspecting the slot of the stator coil, pay attention to the coil Notch section. Loose and discolored slot wedges must be dealt with.

2. When checking the end of the coil, check the insulation for damage and the condition of the paint film. Pay attention to the end fixation. If there is a loose end at the end, a spacer should be added, or a new spacer and tie wire should be used to fasten the end; the insulation paint film at the end of the coil should be cracked or peeled off, and should be re-strengthened insulation.

3. Note that no debris should be left in the motor. Use a megger to measure the insulation resistance of the coil.

4. When the rotor is overhauled, blow the rotor clean with compressed air; check the welding condition of the coil, wire rod and joint; check and deal with the loose and damaged wedge; check the fan itself and its fixing condition; check the condition of the slip ring, The unevenness of the slip ring surface should not exceed 0.5mm; check the insulation of the rotor coil and the tie wires, and strengthen the insulation if necessary.

Only registered users can write reviews