The linear motion system integrates linear slide table, guide rail, slide block, motor, sensor and coupling. Optional stroke 100mm~1800mm, maximum speed 2000mm/s, belt width 20mm, lead range 40mm, suitable for 100W servo motor (optional).
Basic Specification
| Model | ATO-GB100 | |||
| Stroke | 100mm~1800mm (100mm pitch) | |||
| Belt Width | 20mm | |||
| Repeatability Accuracy | ± 0.04mm | |||
| Lead Range | 40mm | |||
| Max. Speed | 2000 mm/s | |||
| Max. Payload | Horizontal | 10 kg | ||
| Vertical | - | |||
| Rated Thrust | 61 N | |||
| Matching Servo Motor Power* | 100W | |||
| Coupling | 12*14 / 12*19 mm | |||
| Home Sensor | Outside | EE-SX672 (NPN) | ||
| Built-in | EE-SX674 (NPN) | |||
*Note: The servo motor is not included in packing list, if you need one, please contact us.
Speed Chart
| Model | Body Width (mm) | Lead Range (mm) | Max. Payload (kg) | Max. Speed (mm/s) | Standard stroke and recommended use of the highest speed (mm/s) | |||||||||
| Horizontal | Vertical | 200 | 400 | 600 | 800 | 1000 | 1200 | 1400 | 1600 | 1800 | ||||
| ATO-GB100 | 100 | 40 | 10 | - | 2000 | - | - | - | - | - | - | - | - | 2000 |
Note: The highest speed is based on the maximum speed of servo motor (3000 rpm).
Features
- The linear slide guide rail adopts synchronous belt transmission, high speed, equipped with servo motor up to 2000mm/s, repeat accuracy ±0.04, especially suitable for high-speed linear motion requirements.
- The belt driven linear slide is a semi-enclosed linear motion system, which is mainly composed of aluminum body, guide rail, diagonal bearing holder, cover plate, slide block and other components.
- Linear slide guide rail uses corrosion-resistant, high-strength aluminum alloy as the base. A high-precision linear guide pair is installed in the base. The aluminum alloy motion base is installed on the slide block. The middle part of motion seat is connected with the nut of ball screw.
- Motor of the motorized linear slide drives the sliding table to reciprocate through the ball screw rod.
- The diagonal bearing holder ensures the repeatability and positioning accuracy of motion seat. The aluminum alloy cover is installed on the motion base for overall protection.
Motor Mounting Dimensions (Unit: mm)

| Motor Power | Motor Size | Shaft Diameter |
| 100W | 38mm | 8mm |
Product reviews
I will give it five stars
Anand
8/30/2021 8:19 PM
This 100W belt driven linear slide is perfectly matched with the servo motor, and the work is very stable. I like it very much and I will give him five stars praise.
Was this review helpful? (0/0)
CAD model
Borina
1/19/2026 12:26 AM
Hello, I am very interested in a 100W 100~1800mm belt-driven linear slide, but I would also greatly appreciate a CAD model (both unfolded and closed versions).
Was this review helpful? (0/0)
Only registered users can write reviews