10 hp Vertical Centrifugal Pump, Single Stage

$2,557.69
3 phase 10 hp vertical centrifugal pump has maximum flow 286 gpm, maximum head 35m (115ft), same diameter of inlet and outlet 80mm (3 inch), optional input voltage 3 phase AC 220V~480V and optional input frequency 50Hz/60Hz. It can be installed in the pipeline for pipeline pressurization, or operate in series or parallel connections for high flow/high head water supply.
SKU: ATO-VCP-7500W
*
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 6-12 days

Three-phase 10 hp vertical centrifugal pump is a single-stage centrifugal pump that features 65m3/h maximum flow, 35m maximum head and 80mm diameter of inlet and outlet.

Features:

  • The centrifugal pump has a vertical structure, and its inlet and outlet have the same diameter. The inlet and outlet are on the same centerline so that they can be installed in the pipeline like a valve. If a protective cover is added, it can be used in the open air.
  • Easy to install and maintain. There is no need to dismantle the piping system, just remove the connecting flat nut of the vertical pump. All rotor parts can then be removed.
  • The vertical pump can be installed vertically or horizontally according to the requirements of the piping system.
  • Vertical centrifugal pumps can be run in series or in parallel according to the requirements of flow and head.

Specification

  • Model: ATO-VCP-80-160
  • Power: 10 hp (7.5kW)
  • Number of stages: Single stage
  • Input voltage: AC 220V~480V
  • Input frequency: 50Hz/60Hz
  • Inlet diameter: 80mm (3 inch)
  • Outlet diameter: 80mm (3 inch)
  • Flow (min. flow to max. flow): 35m3/h (154 gpm), 50m3/h (220 gpm), 65m3/h (286 gpm)
  • Head (max. head to min. head): 52m (171ft), 50m (164ft), 48m (157ft)
  • Efficiency: 38%, 46%, 46%
  • Installation mode: Vertical type or horizontal type
  • Nominal diameter of impeller: 160mm
  • Size: 400*360*650mm
  • Weight: 125kg

Vertical centrifugal pump dimension (unit: mm):

Vertical centrifugal pump dimensional drawing

Boundary dimensionLBHC1*B1
400360650140*200
Installation dimensionAC2*B24-Φd1
125100*1604-Φ18
Flange dimensionDD1n-φd
φ200φ1604-φ18

Details

Vertical Centrifugal Pump Details

Tips: How to maintain the centrifugal pump?

  1. In the operation process of the centrifugal pump, the bearing temperature should not exceed the ambient temperature by 35℃, and the maximum temperature should not exceed 80℃.
  2. Add bearing lubrication oil to the centrifugal pump bearing, observe the oil level to be at the central line of the oil mark, and regularly exchange and supplement the lubrication oil.
  3. Screw out the diversion plug screw of the centrifugal pump, fill and diverse water (or tick liquid guiding).
  4. Close the brake valve of the centrifugal pump water outlet, outlet pressure meter and inlet vacuum meter.
  5. Inch the motor of the centrifugal pump, check if the motor revolving direction is correct or not.
  6. Turn on the centrifugal pump motor, and turn on the outlet pressure gauge and inlet vacuum pump when the centrifugal pipeline pump has a normal operation, gradually open the brake valve and check the motor load conditions when the gauges show the appropriate pressure.
  7. Try to control the flow and head of the centrifugal pipeline pump within the range indicated on the nameplate to ensure that the pipeline pump runs at a high-efficiency point in order to obtain a large energy-saving effect.
  8. Immediately stop the machine in case of an abnormall sound of the pipeline.
  9. If the centrifugal pipeline pump is going to be stopped, please firstly turn off the brake valve, pressure gauge and then the motor.
  10. Please check if the pipeline pump, pipeline and the connections have any looseness, rotate the pipeline pump manually to check if the pump is flexible.
  11. Regularly check the wearing condition of the pump sleeve, replace timely in case of serious wearing.
  12. When the centrifugal pipeline pump is used in severe winter, it is required to unscrew the drainage screw in the lower part of the pump body to avoid frost crack.
  13. If the centrifugal pump is going to be stopped for a long period, the pipeline pump should be completely dismantled and dried. The rotary parts and combination parts should be smeared with gear for appropriate storage.
  14. In the first month of the centrifugal pump operation, the lubrication oil should be exchanged every 100 hours, and then every 500 hours.
  15. The centrifugal pump stuffing glland should be regularly regulated to ensure the normal dripping conditions of the stuffing chamber.
Phase3 phase
Input voltageAC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
Input frequency50Hz, 60Hz
Installation angle of outlet0°, 90° and 180°
Pump typeBooster pump
Number of stagesSingle stage
Motor typeY/ Y2 series motor
Motor speed2900rpm
Impeller material304/ 316 stainless steel
Seal material304 stainless steel, tungsten carbide, fluorine rubber
Inlet max. pressure1MPa (145 psi)
(NPSH)r2.3m
UsageWater, or liquids compatible with pump component materials.
1. The volume of solid particles should be less than 0.1% in unit volume, and the granularity should be less than 0.2mm.
2. The temperature should be lower than 60℃.
EnvironmentTemperature: <40℃, humidity: <95%, altitude<1000m
Warranty12 months

Different types of centrifugal pumps

This video explains different types of centrifugal pumps that can be selected according to one's own needs.

Principles and functionality explained

This video tells us what a centrifugal pump is and its working principle, and you will have a general understanding of it.

Components of centrifugal pumps

This video is an explanation of the components of a centrifugal pump, and we can learn the basic knowledge of the eight components of a centrifugal pump from it.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Performance curve
5
Wesin
Avatar
7/14/2025 12:16 AM
Hello, I need the data sheet and performance curve of ATO-VCP-7500W.
Was this review helpful? Yes No (0/0)
ATO Responded
Before providing the "performance curve", can you please tell me what is the required flow and head of this pump?
High quality vertical centrifugal pump
5
Andy
Avatar
5/27/2026 7:24 PM
This 10 HP vertical centrifugal pump delivers strong water flow and stable head pressure. Easy to install and maintain, it works perfectly for pipeline pressurization in our workshop.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Three-phase 10 hp vertical centrifugal pump is a single-stage centrifugal pump that features 65m3/h maximum flow, 35m maximum head and 80mm diameter of inlet and outlet.

Features:

  • The centrifugal pump has a vertical structure, and its inlet and outlet have the same diameter. The inlet and outlet are on the same centerline so that they can be installed in the pipeline like a valve. If a protective cover is added, it can be used in the open air.
  • Easy to install and maintain. There is no need to dismantle the piping system, just remove the connecting flat nut of the vertical pump. All rotor parts can then be removed.
  • The vertical pump can be installed vertically or horizontally according to the requirements of the piping system.
  • Vertical centrifugal pumps can be run in series or in parallel according to the requirements of flow and head.

Specification

  • Model: ATO-VCP-80-160
  • Power: 10 hp (7.5kW)
  • Number of stages: Single stage
  • Input voltage: AC 220V~480V
  • Input frequency: 50Hz/60Hz
  • Inlet diameter: 80mm (3 inch)
  • Outlet diameter: 80mm (3 inch)
  • Flow (min. flow to max. flow): 35m3/h (154 gpm), 50m3/h (220 gpm), 65m3/h (286 gpm)
  • Head (max. head to min. head): 52m (171ft), 50m (164ft), 48m (157ft)
  • Efficiency: 38%, 46%, 46%
  • Installation mode: Vertical type or horizontal type
  • Nominal diameter of impeller: 160mm
  • Size: 400*360*650mm
  • Weight: 125kg

Vertical centrifugal pump dimension (unit: mm):

Vertical centrifugal pump dimensional drawing

Boundary dimensionLBHC1*B1
400360650140*200
Installation dimensionAC2*B24-Φd1
125100*1604-Φ18
Flange dimensionDD1n-φd
φ200φ1604-φ18

Details

Vertical Centrifugal Pump Details

Tips: How to maintain the centrifugal pump?

  1. In the operation process of the centrifugal pump, the bearing temperature should not exceed the ambient temperature by 35℃, and the maximum temperature should not exceed 80℃.
  2. Add bearing lubrication oil to the centrifugal pump bearing, observe the oil level to be at the central line of the oil mark, and regularly exchange and supplement the lubrication oil.
  3. Screw out the diversion plug screw of the centrifugal pump, fill and diverse water (or tick liquid guiding).
  4. Close the brake valve of the centrifugal pump water outlet, outlet pressure meter and inlet vacuum meter.
  5. Inch the motor of the centrifugal pump, check if the motor revolving direction is correct or not.
  6. Turn on the centrifugal pump motor, and turn on the outlet pressure gauge and inlet vacuum pump when the centrifugal pipeline pump has a normal operation, gradually open the brake valve and check the motor load conditions when the gauges show the appropriate pressure.
  7. Try to control the flow and head of the centrifugal pipeline pump within the range indicated on the nameplate to ensure that the pipeline pump runs at a high-efficiency point in order to obtain a large energy-saving effect.
  8. Immediately stop the machine in case of an abnormall sound of the pipeline.
  9. If the centrifugal pipeline pump is going to be stopped, please firstly turn off the brake valve, pressure gauge and then the motor.
  10. Please check if the pipeline pump, pipeline and the connections have any looseness, rotate the pipeline pump manually to check if the pump is flexible.
  11. Regularly check the wearing condition of the pump sleeve, replace timely in case of serious wearing.
  12. When the centrifugal pipeline pump is used in severe winter, it is required to unscrew the drainage screw in the lower part of the pump body to avoid frost crack.
  13. If the centrifugal pump is going to be stopped for a long period, the pipeline pump should be completely dismantled and dried. The rotary parts and combination parts should be smeared with gear for appropriate storage.
  14. In the first month of the centrifugal pump operation, the lubrication oil should be exchanged every 100 hours, and then every 500 hours.
  15. The centrifugal pump stuffing glland should be regularly regulated to ensure the normal dripping conditions of the stuffing chamber.
Product reviews
Performance curve
5
Wesin
Avatar
7/14/2025 12:16 AM
Hello, I need the data sheet and performance curve of ATO-VCP-7500W.
Was this review helpful? Yes No (0/0)
ATO Responded
Before providing the "performance curve", can you please tell me what is the required flow and head of this pump?
High quality vertical centrifugal pump
5
Andy
Avatar
5/27/2026 7:24 PM
This 10 HP vertical centrifugal pump delivers strong water flow and stable head pressure. Easy to install and maintain, it works perfectly for pipeline pressurization in our workshop.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews