10 HP (7.5 kW) Sliding Vane Pump, 380V

$7,942.86
Competitive price 10 hp sliding vane pump has a strong self-priming capacity and mechanical seals of special construction. The self-priming height of this type of vane pump can reach 6.5m and the rotating speed can reach 960 r/min. Rotary sliding vane pump often used in chemical industry and oil tank truck.
SKU: ATO-SVP-10
Free Shipping
Delivery date: 10-12 days

Sliding vane pump are known for their reliability, efficiency, and ability to handle various fluids, including liquids with high viscosity and those containing solids or abrasive particles. 10 hp vane type pump suitable for industrial applications such as fuel transfer, chemical processing, and lubrication systems.

Features:

  • Slide pump has a strong self-priming capacity.
  • Mechanical seal with special structure is safe, durable and reliable.
  • Pump vane by centrifugal force, mechanical thrust, hydraulic pressure combined action, so that the pump has a unique high efficiency.

Specification:

  • Model: ATO-80YPB-60
  • Voltage: 380V
  • Power: 10 HP (7.5 kW)
  • Capacity: 60 m3/h
  • Pressure: 0.4 MPa
  • Rotate Speed: 960 r/min
  • Self-priming Height: 6.5m

Structure:

Sliding vane pump structure

Application:

Sliding vane pump application

Tips: Sliding Vane Pump Troubleshooting

  • Inspect for Leakage. Check for any signs of leakage around the pump, including at the pump's inlet and outlet connections, as well as at the seal or gasket areas. Leakage can result from worn vanes, damaged seals, or loose connections. If there is leakage, replace worn vanes, damaged seals, or tighten loose connections.
  • Check for Cavitation. Cavitation occurs when the pump's suction pressure is too low, causing the formation of vapor bubbles in the liquid being pumped. This can result in reduced pump performance and damage to the pump's vanes.
  • Inspect Vanes. Examine the pump's vanes for wear or damage. Worn or damaged vanes can reduce the pump's efficiency and performance.
  • Check for Vibration or Noise. Unusual vibration or noise can indicate misalignment, worn bearings, or other mechanical issues.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
High efficiency capability
5
Mrthos
Avatar
11/23/2023 11:16 PM
This 10 HP (7.5 kW) sliding vane turbine pump is very pleased with its high efficiency capabilities. It demonstrates excellent performance at 380V, providing a reliable liquid transfer solution for my industrial applications.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Sliding vane pump are known for their reliability, efficiency, and ability to handle various fluids, including liquids with high viscosity and those containing solids or abrasive particles. 10 hp vane type pump suitable for industrial applications such as fuel transfer, chemical processing, and lubrication systems.

Features:

  • Slide pump has a strong self-priming capacity.
  • Mechanical seal with special structure is safe, durable and reliable.
  • Pump vane by centrifugal force, mechanical thrust, hydraulic pressure combined action, so that the pump has a unique high efficiency.

Specification:

  • Model: ATO-80YPB-60
  • Voltage: 380V
  • Power: 10 HP (7.5 kW)
  • Capacity: 60 m3/h
  • Pressure: 0.4 MPa
  • Rotate Speed: 960 r/min
  • Self-priming Height: 6.5m

Structure:

Sliding vane pump structure

Application:

Sliding vane pump application

Tips: Sliding Vane Pump Troubleshooting

  • Inspect for Leakage. Check for any signs of leakage around the pump, including at the pump's inlet and outlet connections, as well as at the seal or gasket areas. Leakage can result from worn vanes, damaged seals, or loose connections. If there is leakage, replace worn vanes, damaged seals, or tighten loose connections.
  • Check for Cavitation. Cavitation occurs when the pump's suction pressure is too low, causing the formation of vapor bubbles in the liquid being pumped. This can result in reduced pump performance and damage to the pump's vanes.
  • Inspect Vanes. Examine the pump's vanes for wear or damage. Worn or damaged vanes can reduce the pump's efficiency and performance.
  • Check for Vibration or Noise. Unusual vibration or noise can indicate misalignment, worn bearings, or other mechanical issues.
Product reviews
High efficiency capability
5
Mrthos
Avatar
11/23/2023 11:16 PM
This 10 HP (7.5 kW) sliding vane turbine pump is very pleased with its high efficiency capabilities. It demonstrates excellent performance at 380V, providing a reliable liquid transfer solution for my industrial applications.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews