1" Gas Solenoid Valve, LPG/Natural Gas

$65.76
Low cost 1" gas solenoid valve, explosion-proof standard is ExmbⅡT4, made of high-quality brass or aluminum alloy, with excellent corrosion resistance and high temperature resistance, can be used for liquefied petroleum gas (LPG) and natural gas. The gas electric valve supports a maximum pressure of 100kPa.
SKU: ATO-GSV-DN25
*
Free Shipping
Delivery date: 6-12 days

Note: This solenoid valve cannot be used for drinking water.

The 1" gas solenoid valve is designed specifically for liquefied gas and natural gas, featuring a lightweight aluminum alloy or brass body to ensure durability and corrosion resistance. Emergency gas shut off valve is suitable for a variety of gases such as liquefied petroleum gas and natural gas to meet diverse needs. The gas solenoid valve adopts high-precision control to ensure safe cutoff, avoid gas leakage, and ensure the safety of users.

Specification

  • Model: ATO-SR-510-DN25
  • Suitable gas types: natural gas, LPG, man-made coal gas and other
  • Closing modes: current impulse or manual
  • Body: brass/aluminum
  • Driving voltage: DC 9-15V
  • Sealing material: NBR rubber
  • Close time: <1s
  • Operation temperature: -10~50℃
  • Explosion proof mark: ExmbⅡT4
  • Pressure max: 100kPa
  • Lead wire: 0.4m
  • Connection: G1"
  • Turn on: manual
  • Valve opening: reset manually
  • Valve closing: direct current pulse drive or manually
  • Closing time: <0.3s

Dimension (mm)

1" gas solenoid valve dimension

Wiring diagram

Gas solenoid valve wiring diagram

K1: manual switch
K2: external impulse switch
K3: power failure switch

Detail

Gas solenoid valve detail

Tips: Maintenance guide for gas solenoid valves

  • Check the appearance of the gas solenoid valve regularly to ensure that there is no obvious damage or corrosion. Watch for gas leaks.
  • Keep the valve body and surrounding areas clean, and remove dust and dirt regularly to avoid affecting the normal operation of the valve.
  • Check the cables and connecting wires regularly to ensure that there is no wear or looseness, and ensure that the power supply is stable.
  • Perform functional tests regularly to ensure that the gas solenoid valve can open and close normally, and check the response time.
  • Ensure that the valve working environment is suitable for its design specifications and avoid working under conditions beyond the temperature and pressure range.
  • For any questions or failures, it is recommended to contact professionals for inspection and maintenance to ensure safety and efficiency.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Gas solenoid valve
5
Alysa
Avatar
1/5/2025 5:40 PM
I bought this gas solenoid valve to use as a natural gas valve. The material is thick, the quality is good, and it is very durable. I feel relieved to use it and it is safe enough.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Note: This solenoid valve cannot be used for drinking water.

The 1" gas solenoid valve is designed specifically for liquefied gas and natural gas, featuring a lightweight aluminum alloy or brass body to ensure durability and corrosion resistance. Emergency gas shut off valve is suitable for a variety of gases such as liquefied petroleum gas and natural gas to meet diverse needs. The gas solenoid valve adopts high-precision control to ensure safe cutoff, avoid gas leakage, and ensure the safety of users.

Specification

  • Model: ATO-SR-510-DN25
  • Suitable gas types: natural gas, LPG, man-made coal gas and other
  • Closing modes: current impulse or manual
  • Body: brass/aluminum
  • Driving voltage: DC 9-15V
  • Sealing material: NBR rubber
  • Close time: <1s
  • Operation temperature: -10~50℃
  • Explosion proof mark: ExmbⅡT4
  • Pressure max: 100kPa
  • Lead wire: 0.4m
  • Connection: G1"
  • Turn on: manual
  • Valve opening: reset manually
  • Valve closing: direct current pulse drive or manually
  • Closing time: <0.3s

Dimension (mm)

1" gas solenoid valve dimension

Wiring diagram

Gas solenoid valve wiring diagram

K1: manual switch
K2: external impulse switch
K3: power failure switch

Detail

Gas solenoid valve detail

Tips: Maintenance guide for gas solenoid valves

  • Check the appearance of the gas solenoid valve regularly to ensure that there is no obvious damage or corrosion. Watch for gas leaks.
  • Keep the valve body and surrounding areas clean, and remove dust and dirt regularly to avoid affecting the normal operation of the valve.
  • Check the cables and connecting wires regularly to ensure that there is no wear or looseness, and ensure that the power supply is stable.
  • Perform functional tests regularly to ensure that the gas solenoid valve can open and close normally, and check the response time.
  • Ensure that the valve working environment is suitable for its design specifications and avoid working under conditions beyond the temperature and pressure range.
  • For any questions or failures, it is recommended to contact professionals for inspection and maintenance to ensure safety and efficiency.
Product reviews
Gas solenoid valve
5
Alysa
Avatar
1/5/2025 5:40 PM
I bought this gas solenoid valve to use as a natural gas valve. The material is thick, the quality is good, and it is very durable. I feel relieved to use it and it is safe enough.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews