1 hp Shallow Well Jet Pump with Pressure Tank

$358.79
Cost-effective 1 hp (0.75kW) shallow well jet pump with 20L pressure tank for sale, optional voltage of 110V 60Hz or 220-240V 50Hz. This stainless steel shallow well water pump can convey clear water for irrigation and sprinkler system in garden and yard, with 3m3/h flow, 45m head.
SKU: ATO-SWP-1HP
*
Free Shipping
Delivery date: 6-12 days

1 horsepower shallow well jet pump with pressure tank can be used for irrigation and sprinkler system in garden and yard. This stainless steel water pump needs to be installed on the ground to convey clear water, high performance and convenient.

Specification

  • Model: ATO-JS-100
  • Flow: 3m3/h
  • Head: 45m
  • NPSH: 10m
  • Suction Diameter: 25mm (1 inch)
  • Discharge Diameter: 25mm (1 inch)
  • Stage: Single Stage
  • Voltage (Optional): 110V 60Hz, 220-240V 50Hz
  • Power: 1 hp (0.75 kW)
  • Motor Wire: 100% Copper Wire
  • Cable: 1m
  • Pressure Tank: 20L
  • Body Material: Stainless Steel
  • Performance: Automatic
  • Drive Mode: Electric
  • Conveying Medium: Clear Water
  • Pump Shaft Position: Horizontal
  • Impeller Structure: Semi-Open Impeller
  • Number of Impellers: 1
  • Weight: 15kg

Dimension

Dimensions of 1 hp shallow well jet pump with pressure tank

Tips: How to start a shallow well jet pump?

  1. Fill the suction line and pump casing with water.
  2. Close the pump control valve.
  3. Let the starter plug loose a little and start the pump.
  4. When air no longer bubbles around the starter plug, stop the pump.
  5. Fill the pump casing with water, replace the water inlet plug loosely, and start the pump.
  6. When the pump is fully suctioned, water will flow continuously around the suction plug.
  7. Tighten the starter plug and open the pump control valve.
  8. After the pump has drawn in, the pressure tank may need to be pre-charged.

When digging trenches and laying suction lines in trenches, make sure that there are no high points in the line that could create an airlock that would make starting difficult.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Easy to use
5
Levi
Avatar
7/8/2024 2:32 AM
After using this shallow well pump with pressure tank, I think it is a reliable device that is particularly suitable for water pumping needs in homes and small farms. It is easy to install and intuitive to operate, so users who are not familiar with water pumping systems can use it easily.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

1 horsepower shallow well jet pump with pressure tank can be used for irrigation and sprinkler system in garden and yard. This stainless steel water pump needs to be installed on the ground to convey clear water, high performance and convenient.

Specification

  • Model: ATO-JS-100
  • Flow: 3m3/h
  • Head: 45m
  • NPSH: 10m
  • Suction Diameter: 25mm (1 inch)
  • Discharge Diameter: 25mm (1 inch)
  • Stage: Single Stage
  • Voltage (Optional): 110V 60Hz, 220-240V 50Hz
  • Power: 1 hp (0.75 kW)
  • Motor Wire: 100% Copper Wire
  • Cable: 1m
  • Pressure Tank: 20L
  • Body Material: Stainless Steel
  • Performance: Automatic
  • Drive Mode: Electric
  • Conveying Medium: Clear Water
  • Pump Shaft Position: Horizontal
  • Impeller Structure: Semi-Open Impeller
  • Number of Impellers: 1
  • Weight: 15kg

Dimension

Dimensions of 1 hp shallow well jet pump with pressure tank

Tips: How to start a shallow well jet pump?

  1. Fill the suction line and pump casing with water.
  2. Close the pump control valve.
  3. Let the starter plug loose a little and start the pump.
  4. When air no longer bubbles around the starter plug, stop the pump.
  5. Fill the pump casing with water, replace the water inlet plug loosely, and start the pump.
  6. When the pump is fully suctioned, water will flow continuously around the suction plug.
  7. Tighten the starter plug and open the pump control valve.
  8. After the pump has drawn in, the pressure tank may need to be pre-charged.

When digging trenches and laying suction lines in trenches, make sure that there are no high points in the line that could create an airlock that would make starting difficult.

Product reviews
Easy to use
5
Levi
Avatar
7/8/2024 2:32 AM
After using this shallow well pump with pressure tank, I think it is a reliable device that is particularly suitable for water pumping needs in homes and small farms. It is easy to install and intuitive to operate, so users who are not familiar with water pumping systems can use it easily.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews