1.8 kW CNC ATC Spindle, 60000 rpm

$1,838.46
Get a 1.8kW ATC spindle motor at low price, three phase 220V AC rated voltage, 60000rpm speed, torque 0.28 Nm, 1000Hz, spindle tool changer with Φ3- Φ6 collet, low noise, high precision and long life, improves work efficiency, supplies for CNC router machines.
SKU: ATO-SPINDLE-ATC1800
*
Free Shipping
Delivery date: 6-12 days

Low cost water cooled ATC spindle with 1800 watt, 60000 rpm high speed, 0.28 Nm torque, Φ3- Φ6 collet, 3 phase 220V AC at high frequency 1000Hz, matched with VFD, works for CNC router machine.

Features

  • Reasonable structure design, simple and compact configuration, easy to take apart.
  • High precision, inflexibility and efficiency, long operation life.
  • With high grade size, shape, position precision, and quality of the surface.
  • Enough abrasive resistance, vibration resistance, suitable size.
  • Work stable, low noise, enough fatigue strength.

Specifications

ModelATO-DC-62B
Motor power1800 W
Rated voltage3 Phase 220V AC
Max speed60000 rpm
Max current6.5A
Max frequency1000 Hz
Torque0.28 N·M
Cone at the end of the shaft pulsates≤0.001 mm
Tooling releasing air pressure5.6-6.0 Kgf/cm²
Tooling change methodAutomatic tool changer
Tooling pulling force≥1200 N
Tooling back air pressureNo
Tooling connectionΦ3- Φ6 collet
CoolingWater cooling
EncoderNo
Coolant pressure≥2.5 Kgf/cm²
Approach switchNo
Bearing lubrication methodGrease
Balance levelG1
Install methodClamp
Vibration Value≤0.8 mm/s
Weight3.97 Kg

Note: The spindle motor and VFD shall be suitable with each other. The specifications and parameter settings of the VFD shall match the nominal parameters of the spindle motor. Otherwise, it will burn the spindle motor if the settings are not correct.

Dimension (Unit: mm)

1800W ATC Spindle Dimension

Details

1800W CNC ATC Spindle Details

Tips: Tips For Using an ATC Spindle

  • The cleaning, maintenance and maintenance of the ATC spindle must be carried out after the power is cut off and the work has completely stopped.
  • The automatic tool change spindle must be equipped with a safety protection device on the machine.
  • Do not let your arm touch the rotating part of the ATC spindle during the high-speed rotation of the ATC spindle.
  • The operator of the ATC spindle should not wear loose or sagging clothing, women must tie their long hair
  • Please use the tool holder designated by the spindle.
  • The ATC spindle needs to be maintained regularly in accordance with the manual, otherwise it may cause mechanical failure and damage, and shorten the service life of the ATC spindle.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Great ATC spindle
5
June
Avatar
4/22/2022 12:39 AM
This 1.8kW ATC spindle arrived on time. It works well and is almost completely silent. It's a water-cooled spindle. In fact, it's so quiet compared to my CNC router.
Was this review helpful? Yes No (0/0)
Excellent spindle for my needs
5
Taylor
Avatar
4/22/2022 1:50 AM
I bought a 1.8kW automatic tool changer spindle from this seller. I tested this spindle with a VFD installed on my 2x4 router, and it ran smoothly with little noise. Great value for money.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low cost water cooled ATC spindle with 1800 watt, 60000 rpm high speed, 0.28 Nm torque, Φ3- Φ6 collet, 3 phase 220V AC at high frequency 1000Hz, matched with VFD, works for CNC router machine.

Features

  • Reasonable structure design, simple and compact configuration, easy to take apart.
  • High precision, inflexibility and efficiency, long operation life.
  • With high grade size, shape, position precision, and quality of the surface.
  • Enough abrasive resistance, vibration resistance, suitable size.
  • Work stable, low noise, enough fatigue strength.

Specifications

ModelATO-DC-62B
Motor power1800 W
Rated voltage3 Phase 220V AC
Max speed60000 rpm
Max current6.5A
Max frequency1000 Hz
Torque0.28 N·M
Cone at the end of the shaft pulsates≤0.001 mm
Tooling releasing air pressure5.6-6.0 Kgf/cm²
Tooling change methodAutomatic tool changer
Tooling pulling force≥1200 N
Tooling back air pressureNo
Tooling connectionΦ3- Φ6 collet
CoolingWater cooling
EncoderNo
Coolant pressure≥2.5 Kgf/cm²
Approach switchNo
Bearing lubrication methodGrease
Balance levelG1
Install methodClamp
Vibration Value≤0.8 mm/s
Weight3.97 Kg

Note: The spindle motor and VFD shall be suitable with each other. The specifications and parameter settings of the VFD shall match the nominal parameters of the spindle motor. Otherwise, it will burn the spindle motor if the settings are not correct.

Dimension (Unit: mm)

1800W ATC Spindle Dimension

Details

1800W CNC ATC Spindle Details

Tips: Tips For Using an ATC Spindle

  • The cleaning, maintenance and maintenance of the ATC spindle must be carried out after the power is cut off and the work has completely stopped.
  • The automatic tool change spindle must be equipped with a safety protection device on the machine.
  • Do not let your arm touch the rotating part of the ATC spindle during the high-speed rotation of the ATC spindle.
  • The operator of the ATC spindle should not wear loose or sagging clothing, women must tie their long hair
  • Please use the tool holder designated by the spindle.
  • The ATC spindle needs to be maintained regularly in accordance with the manual, otherwise it may cause mechanical failure and damage, and shorten the service life of the ATC spindle.
Product reviews
Great ATC spindle
5
June
Avatar
4/22/2022 12:39 AM
This 1.8kW ATC spindle arrived on time. It works well and is almost completely silent. It's a water-cooled spindle. In fact, it's so quiet compared to my CNC router.
Was this review helpful? Yes No (0/0)
Excellent spindle for my needs
5
Taylor
Avatar
4/22/2022 1:50 AM
I bought a 1.8kW automatic tool changer spindle from this seller. I tested this spindle with a VFD installed on my 2x4 router, and it ran smoothly with little noise. Great value for money.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

3 hp VFD, Single Phase to Three Phase VFD

GK3000-2S0022
$238.14
Low price 3hp VFD, convert 220V/230V/240V 1 phase to 3 phase, 9.6 amps, RS485 enabled, shipping weight 3kg, manufacturer direct sale.