Pneumatic piston air motor with 1 Nm starting torque, 0.84 Nm stopping torque, and a 1:1 gear ratio. Suitable for mining machinery, conveyor belts, and other industrial drive applications.
Specification
| Model | ATO-HXHM2 |
| Power | 1/6 hp (0.12kW) |
| Gear Ratio | 1:1 |
| Rated Speed | 1000 rpm |
| Rated Torque | 0.84 Nm |
| Free Speed | 2000 rpm |
| Air Consumption | 211 L/min |
| Air Pressure | 0.7 Mpa |
| Starting Torque | 1 Nm |
| Stopping Torque | 1.7 Nm |
| Mounting Type (Optional) | Basic type/ flange type/ foot type |
| Port Size | 1/4" PT |
| Hose Inner Diameter | 6.5 mm |
| Weight | 3 kg |
| Certificate | CE |
| Warranty | 12 months |
Best For
- Mining Machinery: Pneumatic piston air motor is designed for pneumatic drive applications in mining equipment where electric motors may be unsuitable.
- Material Handling Equipment: Suitable for pneumatic drive systems used in material handling and industrial equipment.
- Moderate-Torque Applications: A good fit for machinery requiring 0.84 Nm rated torque and up to 1 Nm starting torque.
- Frequent Startups: The 1 Nm starting torque makes this air motor suitable for equipment that needs reliable torque during startup.
Not Recommended For
- Heavy-Duty Conveying: Not intended for large conveyors or systems requiring substantially higher continuous torque.
- High-Torque Equipment: Applications exceeding the 1 Nm starting torque should use a higher-power piston air motor.
- High-Speed Applications: Not recommended for equipment requiring substantially higher operating speeds than the 1000 rpm rated speed.
- Low-Air-Consumption Systems: With an air consumption of 211 L/min, this piston air motor may not suit applications with limited compressed-air capacity.
Size (unit: mm)
Basic type

Flange type

Foot type

Details

Tips: How to Choose and Use a 1/6 hp Piston Air Motor?
The 1/6 hp piston air motor provides a rated speed of 1000 rpm, rated torque of 0.84 Nm, and starting torque of 1 Nm. Before installation, check the following points to ensure proper operation:
- Check the Required Torque
Make sure the equipment's continuous and starting torque requirements are within the motor's 0.84 Nm rated torque and 1 Nm starting torque. - Match the Air Supply
The motor consumes approximately 211 L/min of compressed air. Confirm that the air compressor and piping system can provide sufficient airflow for the intended operating conditions. - Select the Mounting Type
Choose the basic, flange, or foot mounting configuration according to the available installation space and equipment structure. - Maintain Clean, Lubricated Air
Remove water and contaminants from the air line and use a suitable filter and lubricator to help maintain smooth operation and extend motor service life. - Avoid Continuous Overloading
Do not select this model for applications that continuously require torque or power beyond its rated capacity. A higher-power piston air motor should be considered for heavier loads.
Product reviews
High performance piston air motor
Sapello
5/30/2022 12:50 AM
This is a very impressive piston air motor, with superb craftsmanship and flawless mechanical operation. So far it still works well! And the service is also excellent!
Was this review helpful? (0/0)
Only registered users can write reviews