1.5 kW CNC ATC Spindle, 60000 rpm

$1,752.32
Buy a 3 phase 1500W water-cooled automatic tool changer spindle motor from reliable ATC spindle manufacturers, works at 220V AC, 0.28 Nm torque, Φ3- Φ6 collet, high speed 60000rpm, and frequency up to 1000Hz, high precision & long life, enhances several times efficiency, perfect for CNC router machines.
SKU: ATO-SPINDLE-ATC1500
Free Shipping
Delivery date: 6-12 days

Low cost 1.5 kW water cooled ATC spindle motor, 60000 rpm speed, 0.28 Nm torque, Φ3- Φ6 collet, 1000Hz frequency, 3 phase 220V AC rated voltage, widely used in CNC drilling and milling equipment.

Features

  • Reasonable structure design, simple and compact configuration, easy to take apart.
  • High precision, inflexibility and efficiency, long operation life.
  • With high grade size, shape, position precision, and quality of the surface.
  • Enough abrasive resistance, vibration resistance, suitable size.
  • Work stable, low noise, enough fatigue strength.

Specifications

ModelATO-DC-62F
Motor power1500 W
Rated voltage3 Phase 220V AC
Max speed60000 rpm
Max current10 A
Max frequency1000 Hz
Torque0.28 N·M
Cone at the end of the shaft pulsates≤0.001 mm
Tooling releasing air pressure5.6-6.0 Kgf/cm²
Tooling change methodAutomatic tool changer
Tooling pulling force≥1200 N
Tooling back air pressureNo
Tooling connectionΦ3- Φ6 collet
CoolingWater cooling
EncoderNo
Coolant pressure≥2.5 Kgf/cm²
Approach switchNo
Bearing lubrication methodGrease
Balance levelG1
Install methodClamp
Vibration Value≤0.8 mm/s
Weight3.9 Kg

Note: The spindle motor and VFD shall be suitable with each other. The specifications and parameter settings of the VFD shall match the nominal parameters of the spindle motor. Otherwise, it will burn the spindle motor if the settings are not correct.

Dimension (Unit: mm)

1500W ATC Spindle Dimension

Details

1500W CNC ATC Spindle Details

Tips: Working Principle of the ATC Spindle

The rear part of the main shaft is a cylinder structure. The inside of the cylinder uses air pressure to push the thimble against the middle rod to extend the chuck so that the tool falls off, and then the equipment can use the shaft platform to automatically grab the tool. The solenoid valve at the back of the spindle is used to release the air pressure to clamp the tool. This process is called automatic tool change, or ATC for short.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Very quiet and improved dust control.
5
cxk
Avatar
4/20/2022 7:37 PM
My spindle arrived on time, with very good protective packaging, and the simple instruction sheet was helpful. My spindle works well, is very quiet, and with no motor cooling fan forcing air through the spindle and onto the work piece to contend with, dust control, with my dust shroud, is greatly improved. I use it on a hobbyist CNC machine that I have. I’m very happy with it.
Was this review helpful? Yes No (0/0)
Very nice spindle
5
Pearl
Avatar
4/22/2022 1:40 AM
The ATC spindle arrived quicker than expected, and the experience with this product is great. Thanks to the seller for helping it get it up and running properly, great customer service, I'm very satisfied.
Was this review helpful? Yes No (0/0)
This ATC spindle is well made.
5
zyc
Avatar
5/17/2022 7:03 PM
I bought a 1.5kw CNC spindle for a work project. So far it has been working fine, I have no complaints with the motors at all. Quite a bit quiet than the last one I had, strongly recommend to the people who need a ATC spinle.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low cost 1.5 kW water cooled ATC spindle motor, 60000 rpm speed, 0.28 Nm torque, Φ3- Φ6 collet, 1000Hz frequency, 3 phase 220V AC rated voltage, widely used in CNC drilling and milling equipment.

Features

  • Reasonable structure design, simple and compact configuration, easy to take apart.
  • High precision, inflexibility and efficiency, long operation life.
  • With high grade size, shape, position precision, and quality of the surface.
  • Enough abrasive resistance, vibration resistance, suitable size.
  • Work stable, low noise, enough fatigue strength.

Specifications

ModelATO-DC-62F
Motor power1500 W
Rated voltage3 Phase 220V AC
Max speed60000 rpm
Max current10 A
Max frequency1000 Hz
Torque0.28 N·M
Cone at the end of the shaft pulsates≤0.001 mm
Tooling releasing air pressure5.6-6.0 Kgf/cm²
Tooling change methodAutomatic tool changer
Tooling pulling force≥1200 N
Tooling back air pressureNo
Tooling connectionΦ3- Φ6 collet
CoolingWater cooling
EncoderNo
Coolant pressure≥2.5 Kgf/cm²
Approach switchNo
Bearing lubrication methodGrease
Balance levelG1
Install methodClamp
Vibration Value≤0.8 mm/s
Weight3.9 Kg

Note: The spindle motor and VFD shall be suitable with each other. The specifications and parameter settings of the VFD shall match the nominal parameters of the spindle motor. Otherwise, it will burn the spindle motor if the settings are not correct.

Dimension (Unit: mm)

1500W ATC Spindle Dimension

Details

1500W CNC ATC Spindle Details

Tips: Working Principle of the ATC Spindle

The rear part of the main shaft is a cylinder structure. The inside of the cylinder uses air pressure to push the thimble against the middle rod to extend the chuck so that the tool falls off, and then the equipment can use the shaft platform to automatically grab the tool. The solenoid valve at the back of the spindle is used to release the air pressure to clamp the tool. This process is called automatic tool change, or ATC for short.

Product reviews
Very quiet and improved dust control.
5
cxk
Avatar
4/20/2022 7:37 PM
My spindle arrived on time, with very good protective packaging, and the simple instruction sheet was helpful. My spindle works well, is very quiet, and with no motor cooling fan forcing air through the spindle and onto the work piece to contend with, dust control, with my dust shroud, is greatly improved. I use it on a hobbyist CNC machine that I have. I’m very happy with it.
Was this review helpful? Yes No (0/0)
Very nice spindle
5
Pearl
Avatar
4/22/2022 1:40 AM
The ATC spindle arrived quicker than expected, and the experience with this product is great. Thanks to the seller for helping it get it up and running properly, great customer service, I'm very satisfied.
Was this review helpful? Yes No (0/0)
This ATC spindle is well made.
5
zyc
Avatar
5/17/2022 7:03 PM
I bought a 1.5kw CNC spindle for a work project. So far it has been working fine, I have no complaints with the motors at all. Quite a bit quiet than the last one I had, strongly recommend to the people who need a ATC spinle.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews